Thermal cycling of EB-PVD/NiCoCrAlYHf thermal barrier coatings
Source abstract
Abstract
Microstructural evolution, interfacial toughness and damage initiation of Y2O3 partially stabilised ZrO2 thermal barrier coatings (TBCs), which have been deposited by electro-beam physical vapour deposition on NiCoCrAlYHf coated superalloy substrate, were studied as a function of thermal cycles at 1150°C. Interfacial toughness of TBC systems was measured by indentation method. The results show that bond coat (BC) is composed of β-(Ni,Co)Al and γ solid solution at the initial cycles. β phase is completely transformed into γ at 185 cycles. The thermally grown oxide (TGO), which consists of an Al2O3 layer and a thin spinel layer, has a high growth rate and grows irregularly because of preferential oxidation of Hf rich phases in the BC. This TBC system has a larger critical TGO thickness for failure. The thickness of TGO at planar place is approximately 10 μm when the TBCs spalled. Interfacial toughness decreases substantially at the initial stage of thermal cycling.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Beele W., Czech N., and Schulenberg T.: MPS Rev. 1997, 8, 19–20.
2. Stiger M. J. · Z. Metallkd · 1999 · 90 · 1069
3. 10.1126/science.106860910.1126/science.1068609 ↗
4. Leyens C. · Z. Metallkd · 2001 · 92 · 762
5. 10.1016/S1359-0286(99)00024-810.1016/S1359-0286(99)00024-8 ↗
6. Evans A. G. · Frog. Mater. Sci · 2001 · 46 · 505
7. 10.1016/j.surfcoat.2003.10.01810.1016/j.surfcoat.2003.10.018 ↗
8. Drory M. D. · Proc. R. Soc. Lond. A · 1996 · 452 · 231910.1098/rspa.1996.0124 ↗
9. Begley M. R., Mumm D. R., Evans A. G., and Hutchinson J. W.: Acta Mater. 2000, 48, 3211–3220.10.1016/S1359-6454(00)00108-7 ↗
10. 10.1016/S0013-7944(00)00130-210.1016/S0013-7944(00)00130-2 ↗
11. Xu Q. G. · J. Aeronautical Mater · 2004 · 2 · 46
12. Han Y. F. · 1995
13. 10.1179/mht.1999.00610.1179/mht.1999.006 ↗
14. Li M. S. ‘High temperature corrosion of metals’, 43–53, 2001, Beijing, Metallurgy Industry Press.
15. 10.4028/www.scientific.net/KEM.197.18510.4028/www.scientific.net/KEM.197.185 ↗
16. Sohn Y. H., Kim J. H., Jordan E. H., and Gell M.: Surf Coat. Technot, 2001, 146-147,70–78.10.1016/S0257-8972(01)01478-5 ↗
17. Pint B. A., Haynes J. A., More K. L., Wright I. G., and Leynes C.: in ‘Superalloy 2000’, (ed.Pollock T. M. et al), 629–638; 2000, Warrendale, TMS.10.7449/2000/Superalloys_2000_629_638 ↗