journal article·2019-09

Improved properties of Ti-6Al-4V by combining isothermal equal-channel angular processing and hot-extrusion

Hamid Arabi, Mostafa Ketabchi

Materials Science and Technology· Volume 35· Issue 14
Publisher page

Abstract

The aim of this work was to study effects of hot extrusion on the microstructure of Ti-6Al-4V (wt-%) alloy processed by ECAP. Firstly, an isothermally Ti–6Al–4V alloy processed by Equal channel angular pressing(ECAP) was preheated at 950°C for 6 min and then hot extruded at 900°C. The hot extrusion minimised the grain size and maximised the mechanical strength. Therefore, it was demonstrated that hot extrusion of Ti-6Al-4V alloys that processed by ECAP could be performed without compromising any mechanical properties. Therefore, it is possible to use the ability to apply a reduced cross-section in hot extrusion for an Ti-6Al-4V processed by ECAP without concern about the reduction of properties.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Titanium Alloys Microstructure and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mining and Metallurgical Engineering Department, Amirkabir University of Technology, Tehran, Iran

Funding

Amirkabir University of Technology

References (28)

Show source-provided references
1. 10.1007/s10853-013-7305-x10.1007/s10853-013-7305-x ↗
2. 10.1016/S0924-0136(01)01037-810.1016/S0924-0136(01)01037-8 ↗
3. 10.1016/j.matlet.2013.02.03310.1016/j.matlet.2013.02.033 ↗
4. 10.3390/met502077710.3390/met5020777 ↗
5. 10.1002/adem.20150063010.1002/adem.201500630 ↗
6. 10.4028/www.scientific.net/AMM.479-480.18110.4028/www.scientific.net/AMM.479-480.181 ↗
7. 10.1002/adem.20130053010.1002/adem.201300530 ↗
8. 10.1016/j.actamat.2013.08.01810.1016/j.actamat.2013.08.018 ↗
9. 10.1016/j.msea.2004.02.09310.1016/j.msea.2004.02.093 ↗
10. 10.1016/S0261-3069(99)00085-010.1016/S0261-3069(99)00085-0 ↗
11. 10.1007/s11661-999-0256-910.1007/s11661-999-0256-9 ↗
12. 10.1016/S1359-6462(02)00356-110.1016/S1359-6462(02)00356-1 ↗
13. 10.4028/www.scientific.net/MSF.503-504.75710.4028/www.scientific.net/MSF.503-504.757 ↗
14. 10.1557/mrc.2013.4010.1557/mrc.2013.40 ↗
15. 10.1007/s12598-018-1071-510.1007/s12598-018-1071-5 ↗
16. 10.1016/j.actamat.2015.12.00310.1016/j.actamat.2015.12.003 ↗
17. 10.4028/www.scientific.net/MSF.735.25310.4028/www.scientific.net/MSF.735.253 ↗
18. 10.1016/j.msea.2017.12.10610.1016/j.msea.2017.12.106 ↗
19. Mukhametrakhimov M.K. · Rev Adv Mater Sci · 2012 · 31 · 174
20. May L. · 2009
21. 10.1007/s12598-010-0180-610.1007/s12598-010-0180-6 ↗
22. 10.1016/j.msea.2007.06.09110.1016/j.msea.2007.06.091 ↗
23. 10.1007/s10853-015-9143-510.1007/s10853-015-9143-5 ↗
24. 10.1016/j.msea.2012.08.00510.1016/j.msea.2012.08.005 ↗
25. 10.4028/www.scientific.net/MSF.447-448.44110.4028/www.scientific.net/MSF.447-448.441 ↗
26. 10.1007/s11837-016-1820-610.1007/s11837-016-1820-6 ↗
27. 10.1016/j.jallcom.2008.07.20010.1016/j.jallcom.2008.07.200 ↗
28. 10.1016/j.scriptamat.2004.05.00610.1016/j.scriptamat.2004.05.006 ↗