Hot deformation behaviour and microstructure of a high-alloy gear steel
Source abstract
Abstract
High strain isothermal compression tests at temperatures of 700–1200°C and strain rates of 0.1–50 s −1 were performed in a Gleeble-3800 thermal simulator to investigate the hot deformation behaviour of a high-alloy Cr–Co–Mo–Ni gear steel, and the constitution equation and hot processing map were established based on these experiments. The results show that the flow stress can be described by the constitutive equation in hyperbolic sine function, and the optimum hot working regions are at the temperature of 1000–1100°C and strain rate of 0.3–1.0 s −1 . Optical microscopy observations of austenite grains indicate that dynamic recrystallisation occurs when the deformation temperature is over 900°C. The forging was successfully produced on the basis of the above-described researches.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing, People's Republic of China
Institute for Special Steels, Central Iron and Steel Research Institute, Beijing, People's Republic of China
Funding
National Key Research and Development Program of China · the Natural Science Foundation of Beijing
References (32)
Show source-provided references
1. Wang K · Iron Steel · 2011 · 46 · 75
2. Hou ZP · Iron Steel · 2014 · 49 · 80
3. 10.1007/s11665-011-0031-010.1007/s11665-011-0031-0 ↗
4. 10.1016/j.msea.2010.05.07910.1016/j.msea.2010.05.079 ↗
5. 10.1016/j.msea.2009.02.04410.1016/j.msea.2009.02.044 ↗
6. 10.1007/BF0264349010.1007/BF02643490 ↗
7. 10.1007/BF0266490210.1007/BF02664902 ↗
8. Prasad YVRK. · Indian J Technol · 1990 · 28 · 435
9. 10.1007/BF0264776510.1007/BF02647765 ↗
10. Prasad YVRK · 1997
11. 10.1179/imr.1998.43.6.24310.1179/imr.1998.43.6.243 ↗
12. 10.1179/1743284712Y.000000008310.1179/1743284712Y.0000000083 ↗
13. 10.1016/j.matdes.2009.06.02810.1016/j.matdes.2009.06.028 ↗
14. 10.1016/j.msea.2010.11.02010.1016/j.msea.2010.11.020 ↗
15. 10.1016/0921-5093(93)90498-410.1016/0921-5093(93)90498-4 ↗
16. 10.1016/j.jmatprotec.2004.09.08910.1016/j.jmatprotec.2004.09.089 ↗
17. 10.1016/j.msea.2009.04.02810.1016/j.msea.2009.04.028 ↗
18. 10.1016/j.jmatprotec.2008.09.02410.1016/j.jmatprotec.2008.09.024 ↗
19. 10.1016/j.jmatprotec.2007.11.30810.1016/j.jmatprotec.2007.11.308 ↗
20. 10.1016/0001-6160(66)90207-010.1016/0001-6160(66)90207-0 ↗
21. Wang BX · Mater Sci Technol · 2005 · 393 · 102
22. 10.2355/isijinternational.43.76110.2355/isijinternational.43.761 ↗
23. Polyak YEII · Phys Met Metallogr · 1989 · 67 · 172
24. Liu YN · Ordn Mater Sci Eng · 1995 · 18 · 10
25. Gorelik SS. · 1981
26. Meng WJ. · 2015
27. Decker R F · Trans ASM · 1962 · 55 · 58
28. Ziegler H. · 1963
29. Zeng WD · Rare Metal Mat. Eng · 2006 · 35 · 673
30. Sun K · Rare Metal Mater Eng · 2009 · 38 · 34
31. 10.1063/1.170736310.1063/1.1707363 ↗
32. 10.1016/S0921-5093(98)00784-910.1016/S0921-5093(98)00784-9 ↗