Effects of hot isostatic pressing and heat treatment on cast cobalt alloy
Source abstract
Abstract
Investment cast biomedical alloys are often heat treated to refine the microstructure and improve mechanical properties. Test specimens of American Society for Testing and Materials F75 alloy (Co–28 wt-Cr–6 wt-Mo) were cast and solidified at two cooling rates, which influenced the size and area fraction of secondary phases (carbides) precipitated at grain boundaries and in interdendritic zones. The specimens were then subjected to hot isostatic pressing and age hardening. This produced smaller globular carbides of reduced area fraction, and reduced the size of micropores, independent of as cast characteristics. Strength and hardness were not significantly altered. The most significant effect of the post-casting treatment was to increase the ductility of the alloy, most likely due to the dissolution of brittle intergranular carbides and reduction in pore size.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · Advanced materials and composites · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical and Materials Engineering, University College Dublin, Belfield, Dublin 4, Ireland
DePuy (Ireland), Loughbeg, Ringaskiddy Co., Cork, Ireland
References (24)
Show source-provided references
1. 2012
2. 10.1302/0301-620X.93B3.2546710.1302/0301-620X.93B3.25467 ↗
3. Beaumont R, Thornton J, Wright M Young E and Cowern M: ‘Annual report: public and patient guide’; 2011, UK, National Joint Registry, Hemel Hempstead.
4. ‘Standard specification for cobalt - 28 chromium - 6 molybdenum alloy castings and casting alloy for surgical implants’, F 75-01; 1998, Philadelphia, PA, ASTM.
5. 10.1002/(SICI)1097-4636(199702)34:2<157::AID-JBM3>3.0.CO;2-P10.1002/(SICI)1097-4636(199702)34:2<157::AID-JBM3>3.0.CO;2-P ↗
6. 10.1002/jbm.82016010910.1002/jbm.820160109 ↗
7. 10.1007/s11661-013-1825-510.1007/s11661-013-1825-5 ↗
8. 10.1002/jbm.82009031110.1002/jbm.820090311 ↗
9. 10.1002/jbm.82012061310.1002/jbm.820120613 ↗
10. 10.1002/jbm.82013020810.1002/jbm.820130208 ↗
11. 10.1002/jbm.82016010910.1002/jbm.820160109 ↗
12. 10.1002/jbm.1000110.1002/jbm.10001 ↗
13. 10.1016/S0043-1648(03)00046-210.1016/S0043-1648(03)00046-2 ↗
14. 10.1016/j.jmbbm.2013.04.01310.1016/j.jmbbm.2013.04.013 ↗
15. 10.1007/BF0264392310.1007/BF02643923 ↗
16. Kurz W and Fisher DJ: ‘Fundamentals of solidification’, 3rd edn; 1989, Aedermannsdorf, Switzerland, Trans Tech Publications.
17. Kaiser R: ‘Study of the effect of casting variables and heat treatment procedures on the microstructure and mechanical properties of Co-Cr-Mo biomedical alloy’, PhD thesis, University College Dublin, Dublin, Ireland, 2013.
18. ‘Metallic materials - tensile testing’, BS EN ISO 6892-1, 2009.
19. ‘Matlab’; 2008, Natick, MA, The MathWorks Inc.
20. Rasband WS: ‘ImageJ’, U. S National Institute of Health, Maryland, 1997. Available at: http://imagej.nih.gov/ij/.
21. 10.1007/s11837-013-0567-610.1007/s11837-013-0567-6 ↗
22. 10.1002/jbm.1000110.1002/jbm.10001 ↗
23. 10.1243/09544119JEIM11010.1243/09544119JEIM110 ↗
24. 10.1177/0022034561040001250110.1177/00220345610400012501 ↗