journal article·2013-06

Effect of equal channel angular pressing on microstructural and mechanical properties of as cast Al–20 wt-Zn alloy

M Aydın, Y Heyal

Materials Science and Technology· Volume 29· Issue 6
Publisher page

Abstract

The microstructural and mechanical properties, mainly the hardness, tensile properties and impact toughness of two phase Al–20 wt-Zn alloy subjected to severe plastic deformation via equal channel angular pressing (ECAP) up to two passes, were studied. High cycle fatigue behaviour of ECAP processed alloy was investigated for the first time. The ECAP almost completely eliminated the as cast dendritic microstructure including casting defects such as microporosities and formed a refined microstructure consisting of elongated microconstituents, aluminium rich α and zinc rich α+ η eutectoid phases. As a result of this microstructural change, the tensile response, impact toughness and fatigue performance of the alloy improved significantly. The rates of increase in endurance limit and impact toughness after ECAP are 89 and 122 respectively. In addition, a relationship represented by an equation between the stress amplitude σa and number of cycles to failure N values was determined to express the fatigue behaviour of the alloy in all states. It was also observed that the nature of fatigue fracture characteristics of the as cast Al–20 wt-Zn alloy changed after ECAP.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Karadeniz Technical University, Trabzon 61080, Turkey

References (45)

Show source-provided references
1. 10.1016/S0079-6425(99)00007-910.1016/S0079-6425(99)00007-9 ↗
2. 10.1016/j.scriptamat.2004.05.00610.1016/j.scriptamat.2004.05.006 ↗
3. 10.4028/www.scientific.net/MSF.426-432.23710.4028/www.scientific.net/MSF.426-432.237 ↗
4. 10.1016/j.msea.2005.08.22110.1016/j.msea.2005.08.221 ↗
5. 10.1016/S0921-5093(03)00082-010.1016/S0921-5093(03)00082-0 ↗
6. 10.1016/S0921-5093(02)00010-210.1016/S0921-5093(02)00010-2 ↗
7. Segal VM · Mater. Sci. Eng. A · 2005 · 386 · 26910.1016/S0921-5093(04)00934-7 ↗
8. 10.1023/A:101793241704310.1023/A:1017932417043 ↗
9. 10.1016/j.msea.2004.09.03010.1016/j.msea.2004.09.030 ↗
10. 10.1016/j.pmatsci.2006.02.00310.1016/j.pmatsci.2006.02.003 ↗
11. 10.1016/j.actamat.2004.09.01710.1016/j.actamat.2004.09.017 ↗
12. 10.1016/j.ijfatigue.2009.06.02210.1016/j.ijfatigue.2009.06.022 ↗
13. 10.1016/S0921-5093(02)00813-410.1016/S0921-5093(02)00813-4 ↗
14. 10.1016/j.scriptamat.2004.05.01210.1016/j.scriptamat.2004.05.012 ↗
15. 10.1016/j.msea.2004.10.03110.1016/j.msea.2004.10.031 ↗
16. 10.1016/0043-1648(87)90234-110.1016/0043-1648(87)90234-1 ↗
17. Gervais E · CIM Bull. · 1987 · 80 · 67
18. 10.1016/S0921-5093(99)00554-710.1016/S0921-5093(99)00554-7 ↗
19. 10.1016/S0301-679X(03)00113-010.1016/S0301-679X(03)00113-0 ↗
20. 10.1016/j.msea.2005.05.07810.1016/j.msea.2005.05.078 ↗
21. Woodthorpe J · Met. Sci. · 1997 · 11 · 10310.1179/msc.1977.11.3.103 ↗
22. Goodwin FE, Ponikvar AL: ‘Engineering properties of zinc alloys’, 82–86; 1989, Research Triangle Park, NC, ILZRO.
23. 10.1179/02670830110151039310.1179/026708301101510393 ↗
24. 10.1016/S0142-1123(03)00091-410.1016/S0142-1123(03)00091-4 ↗
25. 10.1016/j.matchar.2004.05.00810.1016/j.matchar.2004.05.008 ↗
26. 10.1007/s11661-009-9940-z10.1007/s11661-009-9940-z ↗
27. 10.1016/j.jmatprotec.2004.02.01010.1016/j.jmatprotec.2004.02.010 ↗
28. 10.1016/j.msea.2006.05.04410.1016/j.msea.2006.05.044 ↗
29. 10.4028/www.scientific.net/MSF.633-634.43710.4028/www.scientific.net/MSF.633-634.437 ↗
30. 10.1016/S1359-6454(97)00494-110.1016/S1359-6454(97)00494-1 ↗
31. 10.1007/BF0059574410.1007/BF00595744 ↗
32. 10.1016/S0921-5093(01)01455-110.1016/S0921-5093(01)01455-1 ↗
33. 10.4028/www.scientific.net/MSF.426-432.29710.4028/www.scientific.net/MSF.426-432.297 ↗
34. 10.1016/j.scriptamat.2005.05.03610.1016/j.scriptamat.2005.05.036 ↗
35. 10.1016/S0921-5093(00)01682-810.1016/S0921-5093(00)01682-8 ↗
36. 10.1016/j.msea.2007.02.00710.1016/j.msea.2007.02.007 ↗
37. 10.1016/j.jmatprotec.2008.05.04310.1016/j.jmatprotec.2008.05.043 ↗
38. 10.1016/j.actamat.2006.04.02510.1016/j.actamat.2006.04.025 ↗
39. 10.1016/j.jallcom.2006.08.18910.1016/j.jallcom.2006.08.189 ↗
40. 10.1023/A:102443460254010.1023/A:1024434602540 ↗
41. 10.1016/j.ijfatigue.2009.10.00710.1016/j.ijfatigue.2009.10.007 ↗
42. Ashby MF, Jones DRH: ‘Engineering materials’, 1st edn, 141–145; 1980, Oxford, Pergamon Press.
43. 10.1016/j.jmatprotec.2012.03.02710.1016/j.jmatprotec.2012.03.027 ↗
44. Groover MP: ‘Fundamentals of modern manufacturing’, 2nd edn, 435–446; 1996, Upper Saddle River, NJ, Prentice-Hall.
45. Schey JA: ‘Introduction to manufacturing processes’, 2nd edn, 188–190; 1987, New York, McGraw-Hill.