journal article·2005-04

Growth mechanisms of interfacial compounds in arc brazed galvanised steel joints with Cu97Si3filler

R.-F. Li, Z.-S. Yu, K. Qi, F.-M. Zhou, M.-F. Wu, C. Yu

Materials Science and Technology· Volume 21· Issue 4
Publisher page

Abstract

Galvanised steels have been joined using an arc brazing process with Cu97Si3 as the filler metal. The arcing time ranged from 1 s to 5 s with arcing current of 70 A in flowing argon. Excellent wetting between the base materials and the filler was observed for all samples. The reaction and products were confirmed by analysis of possible reaction products at the interface using thermodynamics, SEM, and EDS methods. From this, the schematic cycle of the interface Fe/Si compound growth mechanisms and fragmentation mechanisms of a whiskerlike intermetallic compound were determined. It has also been observed that Fe5Si3(Cu) particles are most likely to be generated at the interface through 'dissolve separation' 'whiskerlike compound fragmentation', and 'anode spot action' methods in the present arc brazing process.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (3)

Show source-provided references
1. Yu Z. S. · Technol · 2002 · 8
2. Frings A. · Schweien Schneiden · 1989 · 41 · 577
3. Frings A. · Schweien Schneiden · 1986 · 38 · 624