Creep damage and grain boundary precipitation in power plant metals
Source abstract
Abstract
There is clear evidence that creep damage in power plant steels is associated with grain boundary precipitates. These particles provide favourable nucleation sites for creep damage such as grain boundary cavities and microcracks. Monte Carlo based grain boundary precipitation kinetics is combined with continuum creep damage mechanics (CDM) to model both the microstructural evolution and creep behaviour in power plant metals. It is found that grain boundary precipitates, such as M23C6 in most Cr containing ferritic steels, are harmful to the creep properties of the material, in line with experimental observations. It is also found that to improve the creep behaviour of the material, means should be found either to increase the proportion of MX type particles, such as VN, or to decrease or remove the larger grain boundary precipitates, such as M23C6. Hafnium has been ion implanted into thin foils of a 9 wt-%Cr ferritic steel to study the effect of hafnium on the grain boundary precipitation kinetics. It is found that the implantation of hafnium to the steel completely prohibits the formation of the common grain boundary M23C6 particles. Instead, two new types of precipitates are formed. One is hafnium carbide, which is an MX type precipitate, and is very small in size and has a much higher volume fraction as compared with the volume fraction of VN in conventional power plant ferritic steels. The other is Cr- and V-rich nitride of formula M2N. CDM modelling shows that implantation of hafnium can markedly improve the creep property of the material. In addition, the replacement of M23C6 with hafnium carbide increases the concentration of Cr in the matrix and is expected to improve the intergranular corrosion resistance of the material.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. 10.1016/S0022-5096(98)00078-710.1016/S0022-5096(98)00078-7 ↗
2. P. A. Agyakwa, P. H. Shipway, J. A. Williams and T. H. Hyde: in 'Integrity of high temperature welds', 135–145; 2003, London, IOM Communications.
3. 10.1016/S0968-4328(00)00086-X10.1016/S0968-4328(00)00086-X ↗
4. 10.1016/S1359-6454(01)00135-510.1016/S1359-6454(01)00135-5 ↗
5. 10.1016/S0364-5916(97)00007-210.1016/S0364-5916(97)00007-2 ↗
6. 10.1016/S0921-5093(00)00827-310.1016/S0921-5093(00)00827-3 ↗
7. 10.1179/02670830322500851810.1179/026708303225008518 ↗
8. Y. F. Yin and R. G. Faulkner: in 'Power technology', (ed. J. Lecomte-Beckers et al), Vol. 21, 1247–1256; 2002, Mich, Forschungszentrum Jiilich GmbH.
9. 10.1115/1.55618510.1115/1.556185 ↗
10. Y. F. Yin and R. G. Faulkner: Proc. Conf. Parsons 2003, (ed. A. Strang et al), 457–471; 2003, London, IOM, Maney Publishing.
11. M. Taneike, K. Sawada and F. Abe: in 'Power technology', (ed. J. Lecomte-Beckers et al), Vol. 21, 1379–1384; 2002, Jiilich, Forschungszentrum Mich GmbH.
12. 10.4028/www.scientific.net/KEM.171-174.49110.4028/www.scientific.net/KEM.171-174.491 ↗
13. 10.1179/imr.1996.41.5.19810.1179/imr.1996.41.5.198 ↗
14. 10.1016/S0921-5093(01)01874-310.1016/S0921-5093(01)01874-3 ↗
15. 10.1016/0001-6160(75)90047-410.1016/0001-6160(75)90047-4 ↗
16. 10.1080/1478643590824326410.1080/14786435908243264 ↗
17. 10.1080/1478643660822428210.1080/14786436608224282 ↗
18. Ennis P. J. · OMM/ · 2002 · 1 · 1
19. 10.1016/S0364-5916(02)00036-610.1016/S0364-5916(02)00036-6 ↗
20. Davies R. H. · High Temp. Set · 1990 · 26 · 251