journal article·2007-08

Influences of microstructure on service properties of 5Cr21Mn9Ni4N heat resistant alloy

X. L. Xu, Z. W. Yu, J. Wang

Materials Science and Technology· Volume 23· Issue 8
Publisher page

Abstract

The plates of four diesel engine exhaust valves used in a truck failed when servicing for 2000 h, which are made of 5Cr21Mn9Ni4N (21-4N) heat resistant alloy. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction were performed on the plate material of the failed valves and a new valve. The results show that the plate material before service is composed of first carbides (Cr23C6) and γ austenite matrix. However, appearance of the lamellar structure and plate-like precipitates within the grain is the general metallurgical features of the plate material of the failed valves, which indicates that the austenite matrix decomposed in service. XRD and electron diffraction results demonstrate that the lamellar structure is mainly composed of Cr23C6 and γ austenite, coexisting CrN phase, which formed by the discontinuous precipitation mechanism. Electron diffraction shows that the convex lens-like CrN phases precipitate within the grain, which formed by the continuous precipitation mechanism. Fractographic studies indicate that the fatigue is the dominant failure mechanism of the three valves and burning-through occurred on the plate of another failed valve. Formation of the lamellar structure and plate-like precipitations within the grain is mainly responsible for the failure of the valves. Isothermal aging tests were conducted on the plate material from the new valve to study the material stability at high temperatures. The microstructure development during aging was observed by SEM and optical microscopy. The influence of the microstructure on the service properties was discussed and possible failure causes of the valves were assessed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Metallurgical and Alloy Processes · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (7)

Show source-provided references
1. 10.1016/S1350-6307(98)00010-710.1016/S1350-6307(98)00010-7 ↗
2. 10.1016/j.engfailanal.2003.05.01510.1016/j.engfailanal.2003.05.015 ↗
3. 10.1016/S0924-0136(01)00700-210.1016/S0924-0136(01)00700-2 ↗
4. ‘Metals handbook’, Vol. 1, ‘Properties and selection’; 1990, Materials Park, OH, ASM International.
5. Weuniann W. ‘Selection of materials for internal combustion valves’, TRW Valve Division, Cleveland, OH, USA
6. Porter D. A., and Eastering K. E. ‘Phase transformation in metal and alloy’; 1981, London, Van Nostrand Reinhold.
7. Edington J. W. ‘Practice electron microscopy in materials, Part 2’, 67; 1971, Cambridge, Cambridge University Press.