Quantitative X-ray diffraction analysis of development of Z phase in 12%Cr–Nb–V–N steel
Source abstract
Abstract
To study the evolution of nitrides (Nb,V)N, (V,Nb)N and Cr2N, and in particular the formation of the Z phase Cr(V, Nb)N, a model alloy with composition similar to that of 12%Cr steels for high temperature applications, microalloyed with Nb and V but with a very low carbon content, has been designed. A quantitative determination of the volume fractions of the extracted nitrides that had formed after aging treatments at 650°C for up to 10 000 h was carried out by an X-ray diffraction procedure, based on the Rietveld approach. The investigation of the Z phase evolution by the Johnson–Mehl–Avrami–Kolmogorov kinetics at 650 and 700°C revealed that, as the kinetic exponent is very close to unity, the formation mechanism of this phase is not associated with a conventional process of nucleation but hints at a gradual diffusion controlled transformation of the pre-existing V and Nb nitrides.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and Mechanical Properties of Steels · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Centro Sviluppo Materiali SpAVia di Castel Romano 100, Rome I–00128, Italy
Centro Sviluppo Materiali SpAVia di Castel Romano 100, Rome I–00128, Italy; Technical University of Denmark, Lyngby, Denmark
Technical University of Denmark, Lyngby, Denmark
References (32)
Show source-provided references
1. 10.1179/mst.1996.12.7.55210.1179/mst.1996.12.7.552 ↗
2. 10.1051/jp4:200392110.1051/jp4:2003921 ↗
3. 10.1007/BF0258609810.1007/BF02586098 ↗
4. 10.1016/j.calphad.2007.04.00110.1016/j.calphad.2007.04.001 ↗
5. Sawada K., Kushima H., Kimura K., and Tabuchi M.: ISIJ Int. 2007, 47, 733–739.10.2355/isijinternational.47.733 ↗
6. 10.1016/j.msea.2007.12.02210.1016/j.msea.2007.12.022 ↗
7. 10.1016/j.msea.2007.09.03110.1016/j.msea.2007.09.031 ↗
8. 10.1016/j.msea.2008.11.01910.1016/j.msea.2008.11.019 ↗
9. Vodarek V., Danielsen H. K., Grumsen F. B., Hald J., and Strang A.: Proc. 8th Liege Conf. on ‘Materials for advanced power engineering’, (ed. J. Lecomte-Beckers et al), 1251; 2006, Liege, Forschungszentrum Jiilich.
10. Cipolla L., Danielsen H. K., Venditti D., Di Nunzio P. E., Hald J., and Somers M. A. J.: Acta Mater. 2010, 58, 669–679.10.1016/j.actamat.2009.09.045 ↗
11. Rietveld H. M.: Acta Crystallogr. 1967, 22, 151–152.10.1107/S0365110X67000234 ↗
12. 10.1107/S002188986900655810.1107/S0021889869006558 ↗
13. in ‘The Rietveld method, IUCr monographs on crystallography 5’, (ed.Young R. A.); 1993, Oxford, Oxford Science Publishing. Chapter 6.
14. 10.1007/978-1-4613-9535-510.1007/978-1-4613-9535-5 ↗
15. 10.1107/S002188989800985610.1107/S0021889898009856 ↗
16. Pecharsky V. K., and Zavalij P. Y. ‘Fundamentals of powder diffraction and structural characterization of materials’; 2003, Dordrecht, Kluwer Academic.
17. 10.6028/jres.101.03510.6028/jres.101.035 ↗
18. Klug H. P., and Alexander L. E. ‘X-ray diffraction procedures for polycrystalline and amorphous materials'; 1954, New York, John Wiley & Sons.
19. 10.1021/ac60077a01710.1021/ac60077a017 ↗
20. in ‘Metals reference book’, (ed. Smithells C. J.); 1976, London, Butterworths. 82-84
21. 10.1107/S002188988801448710.1107/S0021889888014487 ↗
22. Rinaldi F., Fabbri F., and Martelli S.: Unpublished result.
23. 10.1107/S010876810600333810.1107/S0108768106003338 ↗
24. 10.1103/PhysRevB.78.13420210.1103/PhysRevB.78.134202 ↗
25. Johnson W. A. · Trans. AIME · 1939 · 135 · 416
26. 10.1063/1.175038010.1063/1.1750380 ↗
27. 10.1063/1.175063110.1063/1.1750631 ↗
28. 10.1063/1.175087210.1063/1.1750872 ↗
29. Kolmogorov A. N. · Ser. Mater · 1937 · 3 · 355
30. Humphreys F. J., and Hatherly M. ‘Recrystallization and related annealing phenomena’, 1st edn; 1995, Oxford, Pergamon.10.1016/B978-0-08-041884-1.50008-8 ↗
31. Ilschner B. · Arch. Eisenhutt · 1955 · 26 · 59
32. Christian J. W. ‘The theory of transformations in metals and alloys’, 3rd edn; 2002, Oxford, Pergamon.10.1016/B978-008044019-4/50022-2 ↗