journal article·1997-08

Formation and characteristics of coarsening resistant cubic sigma phase in AI-4.2Cu-1.6Mg-0.2Si

S. C. Barr, L. M. Rylands, H. Jones, W. M. Rainforth

Materials Science and Technology· Volume 13· Issue 8
Publisher page

Abstract

The precipitation and coarsening characteristics of an alloy of nominal composition (wt-%) AI-4.2Cu-l.6Mg-0.2Si were investigated at 200, 265, and 305°C for times up to 650 h. All aging conditions produced a mixture of homogeneously nucleated S′ and the cubic phase σ. The quench rate did not alter appreciably the volume fraction of cubic phase. The lattice parameter of the σ phase was 0.831 ± 0.005 nm and the aspect ratio of the σ precipitates was 1.4 ± 0.1 for treatments at 200 and 265°C, increasing to 1.8 for the specimens aged at 305°C for 24 h. The precipitated σ phase exhibited better resistance to coarsening and dissolution in long term aging treatments at 265°C than the concurrently precipitated S′, although the S′ was a more effective precipitation. hardener.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. I. J. POLMEAR: ‘Light alloys’, 3rd edn, 334; 1995, London, Edward Arnold.
2. 10.1007/BF0035659910.1007/BF00356599 ↗
3. 10.1007/BF0116250210.1007/BF01162502 ↗
4. WILSON R. N. · J. Inst. Met., · 1967 · 95 · 177
5. 10.2464/jilm.27.23910.2464/jilm.27.239 ↗
6. 10.1016/0956-716X(92)90350-N10.1016/0956-716X(92)90350-N ↗
7. 10.1016/0956-716X(92)90072-M10.1016/0956-716X(92)90072-M ↗
8. 10.3891/acta.chem.scand.03-080910.3891/acta.chem.scand.03-0809 ↗
9. RYLANDS L. M. · PhD thesis · 1995
10. NW J. F. · Key Eng. Mater., · 1996 · 217