journal article·1988-09

Spreading kinetics of liquid metals on mild steel

T. Ishida

Publisher page

Abstract

AbstractAbstractThe kinetics of the spread of molten copper, Cu–Mn alloy, and aluminium on solid mild steel were investigated at temperatures from 800 to 1100°C under an anhydrous borate flux. The molten copper and Cu–Mn alloy seem to spread largely by surface diffusion and the spread of molten aluminium follows linear kinetics. The spread coefficient, interfacial tension, and work of adhesion are evaluated from the relationship between an observed rate constant and Yin's theoretical formulism. The spread of molten copper on mild steel indicates complete wetting, while the spread of molten aluminium shows the least wetting. In the aluminium–mild steel spread system, the spread tends to increase with temperature: with increasing temperature, the spread coefficient increases and the interfacial tension decreases, while the work of adhesion remains much the same.MST/743
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. BAILEY G. L. J. · J. Inst. Met. · 1951 · 2 · 57
2. WASSINK R. J. KLEIN · J. Inst. Met. · 1967 · 95 · 38
3. SCHLIEPER H. · Z. Metallkd. · 1963 · 54 · 672
4. NICHOLAS M. · Trans. Metall. Soc. AIME · 1966 · 236 · 1535
5. GORYUNOV Yu. V. · Chem. Re · 1964 · 467
6. KAWAKATSU I. · Trans. Jpn Weld. Soc. · 1973 · 4 · 113
7. 10.1021/j100727a05510.1021/j100727a055 ↗
8. BLANC G. M. A. · Weld. J., 1961, 40, 210s-222s.
9. MAMA K. · Trans. Jpn Inst. Met. · 1978 · 19 · 665
10. ISHIDA T. · J. Mater. Sc · 1986, 21
11. P. GUIRALDENQ: ‘Diffusion dans les metaux’; 1978, Paris, Techniques de l'Ingénieur (translated into Japanese by K. Hirano and T. Okada, 87; 1984, Tokyo, Kyoritsu-Syuppan).10.51257/a-v1-m55 ↗
12. 10.1021/cr60162a00210.1021/cr60162a002 ↗
13. FUNK E. R. · Weld. J., 1952, 31, 310s-316s.
14. MILNER D. R. · Br. Weld. J. · 1958 · 5 · 90
15. BREDZS N. · Weld. J., 1962, 41, 129s—I44s.
16. GANS W. · Z. Metallkd. · 1963 · 54 · 147
17. HEUMANN T. · Z. Metallkd. · 1959 · 50 · 617
18. ISHIDA T. · J. Mater. Sc · 1987, 22
19. W. D. HARKINS: ‘Physical chemistry of surface film’; 1952, New York, Reinhold.
20. L. H. SHAPE and H. SCHONHORN: in ‘Contact angle, wettability, and adhesion’, (ed. R. F. Gould), 189; 1964, Washington, DC, American Chemical Society.10.1021/ba-1964-0043.ch012 ↗
21. REBKIN D. M. · Avian?. Svarka, 1970, (11), 20-23.
22. AJUSCHNA G. D. · Zh. Fiz. Khim. · 1968 · 42 · 2799
23. 10.1111/j.1151-2916.1970.tb12138.x10.1111/j.1151-2916.1970.tb12138.x ↗
24. KORBER V. K. · Giessereiforschung · 1971 · 23 · 173
25. EUSTATHOPOULOS N. · J. Mater. Sc · 1974, 9
26. DAWIHL W. · Aluminium · 1974 · 50 · 574
27. LANG G. · Z. Metallkd. · 1977 · 68 · 113
28. LANG G. · Aluminium · 1974 · 50 · 731
29. J. F. ELLIOTT and M. GLEISER: ‘Thermochemistry for steelmaking', Vol. 1, 8; 1960, Reading, MA, Addison-Wesley.
30. 10.1007/BF0267972410.1007/BF02679724 ↗
31. POLYAK E. V. · Compt. Rend. (Dokl.) Acad. Sci. URSS · 1941 · 30 · 137
32. YAO T. P. · J. Inst. Met. · 1952 · 3 · 17
33. SAITO D. · Mem. Coll. Eng. Kyoto Imp. Univ. · 1932 · 3 · 49
34. JONES W. R. D. · J. Inst. Met. · 1952 · 3 · 145
35. GEBHARDT E. · Z. Metallkd. · 1953 · 44 · 510
36. HAWRA H. · Arch. Eisenhiittenwes. · 1973 · 44 · 385
37. ADAMIEC J. B. · Weld. J., 1961, 40, 330s-336s.
38. VLACK L. H. · AIME · 1951 · 191 · 251
39. SCHATZ J. · Schweissen Schneiden · 1957 · 9 · 522