journal article·2018-03

The dynamic properties of B 4 C/6061Al neutron absorber composites fabricated by power metallurgy

Hongsheng Chen, Wenxian Wang, Huihui Nie, Jun Zhou, Yuli Li, Peng Zhang

Materials Science and Technology· Volume 34· Issue 5
Publisher page

Abstract

The dynamic compression properties of B 4 C/6061Al neutron absorber composites (NACs) with three B 4 C volume fractions (20–40%), fabricated by power metallurgy, were studied. Compression tests were conducted at strain rates ranging from 760 to 1150 s −1 , using a split Hopkinson pressure bar. The damage mechanism was studied through microstructural analysis. Results show that the B 4 C particles exhibited a uniform distribution in the 6061Al matrix. The NACs dynamic strength was found to improve with increasing quantities of B 4 C particles, and with strain rate. The damage mechanisms include particle fracture and interface debonding. Dislocation pile-up was observed at grain boundaries and at the interface between particles and the matrix. A constitutive model under dynamic compression was developed based on the Johnson–Cook model. This paper is part of a thematic issue on Nuclear Materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · High-Velocity Impact and Material Behavior · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

College of Mechanical Engineering, Taiyuan University of Technology, Taiyuan, People's Republic of China

Shanxi Key Laboratory of Advanced Magnesium-based Materials, Taiyuan, People's Republic of China

College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan, People's Republic of China

Shanxi Institute of Energy, Jinzhong, People's Republic of China

Department of Mechanical Engineering, Pennsylvania State University, The Behrend College, Erie, PA, USA

Funding

National Natural Science Foundation of China · Key Science and Technology Program of Shanxi Province, China

References (23)

Show source-provided references
1. 10.1016/j.matdes.2011.03.01810.1016/j.matdes.2011.03.018 ↗
2. 10.1016/j.matdes.2014.04.04810.1016/j.matdes.2014.04.048 ↗
3. 10.1023/A:101498693029910.1023/A:1014986930299 ↗
4. 10.1016/j.jallcom.2015.01.27610.1016/j.jallcom.2015.01.276 ↗
5. 10.1016/j.msea.2014.07.02010.1016/j.msea.2014.07.020 ↗
6. 10.1016/j.msea.2014.10.02510.1016/j.msea.2014.10.025 ↗
7. 10.1016/S0924-0136(03)00815-X10.1016/S0924-0136(03)00815-X ↗
8. 10.1016/j.jnucmat.2005.02.00310.1016/j.jnucmat.2005.02.003 ↗
9. 10.1016/j.nucengdes.2010.05.00510.1016/j.nucengdes.2010.05.005 ↗
10. 10.1016/j.msea.2014.10.02510.1016/j.msea.2014.10.025 ↗
11. 10.1016/j.jallcom.2015.12.22810.1016/j.jallcom.2015.12.228 ↗
12. 10.1016/j.msea.2015.11.08910.1016/j.msea.2015.11.089 ↗
13. 10.1016/j.msea.2016.01.11410.1016/j.msea.2016.01.114 ↗
14. 10.1016/j.msea.2016.08.06210.1016/j.msea.2016.08.062 ↗
15. 10.1016/S0734-743X(01)00025-210.1016/S0734-743X(01)00025-2 ↗
16. 10.1016/j.matdes.2011.08.04510.1016/j.matdes.2011.08.045 ↗
17. 10.1016/j.matdes.2010.09.02510.1016/j.matdes.2010.09.025 ↗
18. 10.1016/j.msea.2009.08.06710.1016/j.msea.2009.08.067 ↗
19. 10.1016/j.matdes.2014.06.04210.1016/j.matdes.2014.06.042 ↗
20. 10.1016/j.msea.2015.10.06410.1016/j.msea.2015.10.064 ↗
21. 10.1016/j.jallcom.2012.04.02310.1016/j.jallcom.2012.04.023 ↗
22. 10.1016/j.matdes.2011.06.02710.1016/j.matdes.2011.06.027 ↗
23. 10.1016/j.matlet.2013.12.11010.1016/j.matlet.2013.12.110 ↗