Statistical evaluation of very high cycle fatigue property of high carbon chromium bearing steel under axial loading
Source abstract
Abstract
Axial loading test was performed to investigate the S–N characteristics and the failure mechanisms of a high carbon chromium bearing steel under very high cycle fatigue (VHCF). Compared with the experimental results under rotating bending, the bearing steel under axial loading also exhibited two failure modes including surface failure and interior inclusion-induced failure. In the life regime beyond about 10 6 cycles, the fine granular area can occur around the inclusion. But under the axial loading with the uniform stress distribution on the cross-section of specimen, the duplex S–N characteristics of bearing steel was not so distinct. In view of the limitation of common statistical method, a statistical method based on mixed Weibull distribution and parameter optimisation was proposed to evaluate the VHCF property of bearing steel corresponding to two failure modes. Based on the proposed statistical method, the P–S–N curves of bearing steel under axial loading can be better established. This paper is part of a Themed Issue on Recent developments in bearing steels.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Beijing Institute of Technology, Beijing 100081, China
College of Science and Engineering, Ritsumeikan University, Kusatsu 5258577, Japan
Funding
National Natural Science Foundation of China
References (19)
Show source-provided references
1. 10.1046/j.1460-2695.1999.00183.x10.1046/j.1460-2695.1999.00183.x ↗
2. 10.1046/j.1460-2695.1999.00187.x10.1046/j.1460-2695.1999.00187.x ↗
3. 10.1299/kikaia.67.180510.1299/kikaia.67.1805 ↗
4. 10.1179/1743284713Y.000000029310.1179/1743284713Y.0000000293 ↗
5. 10.1016/j.actamat.2010.10.06410.1016/j.actamat.2010.10.064 ↗
6. 10.1016/j.engfracmech.2007.05.01510.1016/j.engfracmech.2007.05.015 ↗
7. 10.1111/ffe.1234410.1111/ffe.12344 ↗
8. 10.1179/1743284713Y.000000029710.1179/1743284713Y.0000000297 ↗
9. 10.1166/jnn.2014.988910.1166/jnn.2014.9889 ↗
10. 10.1179/1743284712Y.000000018710.1179/1743284712Y.0000000187 ↗
11. 10.4028/www.scientific.net/AMR.891-892.43410.4028/www.scientific.net/AMR.891-892.434 ↗
12. 10.1016/j.ijfatigue.2009.12.00810.1016/j.ijfatigue.2009.12.008 ↗
13. 10.1016/j.msea.2011.03.02010.1016/j.msea.2011.03.020 ↗
14. 10.1016/j.ijfatigue.2008.09.00110.1016/j.ijfatigue.2008.09.001 ↗
15. 10.1046/j.1460-2695.2001.00459.x10.1046/j.1460-2695.2001.00459.x ↗
16. 10.1046/j.1460-2695.1999.00206.x10.1046/j.1460-2695.1999.00206.x ↗
17. 10.1016/j.ijfatigue.2010.04.01010.1016/j.ijfatigue.2010.04.010 ↗
18. Pilkey W. D. · 2008
19. Sakai T. ‘Review and prospects for current studies on very high cycle fatigue of metallic materials for machine structure use’, Proceedings of the 4th International Conference on Very High Cycle Fatigue, Ann Arbor, MI, PA, TMS; 2007.