journal article·2007-04

Liquid composite moulding of fibre nanocomposites

C. Lekakou, A. Hearn, A. K. Murugesh, B. Le Page

Materials Science and Technology· Volume 23· Issue 4
Publisher page

Abstract

Two liquid composite moulding techniques have been investigated in this study, resin transfer moulding (RTM) and resin infusion under flexible tool (RIFT) for the processing of glass fabric–epoxy laminates with 5% nanoaggregates of silica nanoparticles in the epoxy matrix. It has been found that the high fibre fraction reinforcement ( Vf=0·50) filters the silica nanoaggregates resulting in stopping the in plane resin infiltration in RTM right at the beginning of the filling stage. Laminates of lower fibre fraction ( Vf=0·40) were produced successfully by RIFT. Dynamic mechanical thermal analysis (DMTA) and three point bend tests showed that fibre–silica–epoxy composites, processed by RIFT, had higher elastic shear modulus and interlaminar shear strength than conventional fibre–epoxy composites manufactured by the same RIFT process.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Mechanical Behavior of Composites · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. 10.1007/BF0240323410.1007/BF02403234 ↗
2. 10.1007/BF0240323510.1007/BF02403235 ↗
3. 10.1016/S0143-7496(01)00016-110.1016/S0143-7496(01)00016-1 ↗
4. Rothon R. N., and Hancock M.: in ‘Particulate-filled composites’, (ed.Rothon R.); 1995, Longman Group Ltd.
5. Hussain F. · J. Adv. Mater · 2005 · 37 · 16
6. 10.1016/j.polymer.2005.07.05010.1016/j.polymer.2005.07.050 ↗
7. Liu W. P. · Sci. Technol · 2005 · 65 · 2364
8. 10.1080/0022234050032365610.1080/00222340500323656 ↗
9. 10.1002/pen.2045310.1002/pen.20453 ↗
10. Xu L., and Lee J. L.: Proc ICCM, 2003, 14.
11. 10.1177/073168440504355210.1177/0731684405043552 ↗
12. 10.1021/cm051582s10.1021/cm051582s ↗
13. 10.1177/073168440505546010.1177/0731684405055460 ↗
14. 10.1016/j.polymer.2005.08.02810.1016/j.polymer.2005.08.028 ↗
15. 10.1002/marc.20050051110.1002/marc.200500511 ↗
16. 10.1002/pola.2116710.1002/pola.21167 ↗
17. Tsai J. L., Kuo J. C., and Hsu S. M.: Proc. Int. Conf. on ‘Advanced manufacture’ Taipei, China, November—December 2005,37–42.10.4028/0-87849-990-3.37 ↗
18. 10.1177/00219980303518610.1177/002199803035186 ↗
19. 10.1016/j.compositesa.2005.05.01410.1016/j.compositesa.2005.05.014 ↗
20. Kornmann X. · Sci. Technol · 2005 · 65 · 2259
21. 10.1179/174328904X491810.1179/174328904X4918 ↗
22. WACKER: ‘TIDK N 20 Pyrogenic Silica-Fumed Silica’, 2004, available at www.wacker.com/internet/webcache/en_US/PTM/TM/HDKN20.pdf?ts=1107437644605
23. Saunders R. A. · Sci. Technol · 1999 · 59 · 983
24. Lekakou C., Kontodimopoulos I., Murugesh A. K., Jesson D. A., Watts J., and Smith P. A.: submitted to Polym. Eng. Sci.
25. 10.1016/S0266-3538(01)00104-X10.1016/S0266-3538(01)00104-X ↗
26. 10.1016/j.compscitech.2003.10.00510.1016/j.compscitech.2003.10.005 ↗
27. D 2344-84, ASTM, Philadelphia, PA, USA, 1989.