journal article·2016-03

Development of stretch flangeable ferrite–bainite grades through thin slab casting and rolling

M. Mukherjee, A.R. Chintha, S. Kundu, S. Misra, J. Singh, C. Bhanu, T. Venugopalan

Materials Science and Technology· Volume 32· Issue 4
Publisher page

Abstract

The focus towards the design of light environment friendly fuel efficient vehicles has led to an increase in the demand for high strength steels. As it is true for any developing country, the extra challenge for Indian steel industries is to produce such high strength steels at minimum cost. The aim of the present work was to develop two high strength steel grades with minimum tensile strengths of 540 and 590 MPa, in combination with good ductility and stretch flangeability, through the thin slab casting and rolling route. The present paper describes the alloy and process design methodology used for achieving the target properties. Several mill trials were taken to test the proposed design, wherein the target microstructure and mechanical properties were successfully achieved.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Research and Development, TATA Steel, Jamshedpur 831001, India

Product Technology – Flat Products, TATA Steel, Jamshedpur 831001, India

LD # 3 & TSCR, Tata Steel, Jamshedpur 831001, India

MD's Office, Tata Steel, Jamshedpur 831001, India

References (27)

Show source-provided references
1. Irie T., Tsunoyama K., Shinozaki M., and Kato T. ‘High strength steels for wheel use’, ‘SAE Technical Paper Series no. 880695, SAE International, Warrendale, PA, USA, 1988, 1–8’10.4271/880695 ↗
2. Mizui M., Sekine T., Soneda S., and Herai T. ‘Application of high strength steel sheets for automotive wheels’, ‘SAE Technical Paper Series no. 850540, SAE International, Warrendale, PA, USA, 1985, 1–13’10.4271/850540 ↗
3. Nakajima N., Funakawa Y., Moriyasu N., Murata T., and JFE Steel Corporation: ‘High-tension/hot-rolled steel having excellent workability and method for producing same’, ‘European patent no. 2586886A, 24 June 2011’
4. Seto K., Kawabe H., Tanaka Y., and JFE Steel Corporation: ‘Hot rolled high strength steel sheet and process for production thereof’, ‘European patent no. 2578714A1, 10 April 2013’
5. 10.4028/www.scientific.net/MSF.500-501.28710.4028/www.scientific.net/MSF.500-501.287 ↗
6. Siciliano F., Lezama L. A. L., Klinkenberg C., and Hensger K. E. ‘Processing of Nb-microalloyed HSLA steels in CSP facilities’, Proc. 5th Int. Conf. on ‘HSLA steels’, Sanya, China, November 2005, The Chinese Society for Metals 456–463.
7. Uranga P., Fernández A. I., López B., and Rodriguez-Ibabe J. M. ‘Improvement of microstructural homogeneity in thermomechanically processed Nb steels by thin slab casting’, Proc. 43rd Conf. on ‘Mechanical working and steel processing’, Charlotte, NC, USA, October 2001, Iron and Steel Society 511–530.
8. 10.4028/www.scientific.net/MSF.500-501.25310.4028/www.scientific.net/MSF.500-501.253 ↗
9. 10.2355/isijinternational.36.23510.2355/isijinternational.36.235 ↗
10. De Meyer M., Vanderschueren D., and De Cooman B. C. ‘The influence of Al on the properties of cold rolled CMnSi TRIP steels’, Proc. 41st Conf. on ‘Mechanical working and steel processing’, Baltimore, MD, USA, October 1999, Iron and Steel Society 265–276.
11. 10.2355/isijinternational.50.76010.2355/isijinternational.50.760 ↗
12. Gräf M., Schröder J., Schwinn V., and Hulka K. ‘Production of large diameter pipes grade X 70 with high toughness using acicular ferrite microstructures’. Proc. Int. Conf. on ‘Application and evaluation of high grade linepipes in hostile environments’, Yokohama, Japan, November 2002, EUROPIPE, 1–14.
13. 10.1016/0364-5916(85)90021-510.1016/0364-5916(85)90021-5 ↗
14. 10.2355/isijinternational.42.63610.2355/isijinternational.42.636 ↗
15. 10.2355/isijinternational.44.109310.2355/isijinternational.44.1093 ↗
16. Gladman T. ‘The physical metallurgy of microalloyed steels’, Vol.792; 1997, London, Institute of Materials.
17. 10.2355/isijinternational.32.132910.2355/isijinternational.32.1329 ↗
18. Pickering F. B. · TISCO Tech. J · 1980 · 105
19. Rashid M. S. ‘Relationship between steel microstructure and formability’. Proc. Symp. on ‘Formable HSLA and dual phase’, New York, USA, 1979, TMS-AIME, 1–24.
20. Koo J. Y., and Thomas G. ‘Design of duplex low carbon steels for improved strength: weight applications’, ‘Proc. Symp. on ‘Formable HSLA and dual phase’, New York, USA, 1979, TMS-AIME’, 40–55.
21. 10.2355/isijinternational1966.23.30310.2355/isijinternational1966.23.303 ↗
22. 10.1016/0924-0136(95)01961-D10.1016/0924-0136(95)01961-D ↗
23. 10.3139/146.02119910.3139/146.021199 ↗
24. 10.1016/0026-0800(79)90041-710.1016/0026-0800(79)90041-7 ↗
25. 10.1179/174328105X4807010.1179/174328105X48070 ↗
26. 10.1007/s11661-001-1009-610.1007/s11661-001-1009-6 ↗
27. 10.4028/www.scientific.net/MSF.500-501.4910.4028/www.scientific.net/MSF.500-501.49 ↗