MicroCT (microtomography) quantification of microstructure related to macroscopic behaviour: Part 2 – Damage in SiC–Al monofilament composites tested in monotonic tension and fatigue
Source abstract
Abstract
The present paper reports results of monotonic tensile and of fatigue testing of an aligned monofilament composite SiC–Al. Macroscopic measures of damage (changes in unloading compliance and in unrecovered strain) correlate with noninvasive X-ray microCT (microtomography) quantification of microstructure (alteration of fibre separation, fibre misorientation relative to the load axis and amount of fibre fracture). Monotonic loading beyond yield (188 MPa) alters fibre arrangement and reduces fibre misorientation. Fracture of fibre carbon cores begins at 828 MPa and increases rapidly with rising stress concomitant with marked unloading modulus decreases and permanent strain increases. Fatigue at 621 MPa produces gradually increasing modulus and unrecovered strain with no evidence of fibre damage. At low cycles, the modulus, permanent strain and fraction of fractured C cores increase while fibre misorientation decreases; above 16 cycles, modulus decreases with gradual increases in the other quantities. Fracture in SiC could only be observed after the specimen broke.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Voxel is the abbreviation for volume element and a voxel's size is described in terms of the lengths of its three orthogonal edges. When these edges are equal, the voxel is ‘isotropic’ and only gives one of the three dimensions.
2. Ignatiev K. I. · Technol · 2006 · 22
3. Breunig T. M. ‘Nondestructive evaluation of damage in SiC/A1 metal/matrix composite using X-ray tomographic microscopy,’ PhD thesis, Georgia Institute of Technology, GA, USA, 1992.
4. 10.1557/PROC-143-27310.1557/PROC-143-273 ↗
5. 10.3233/XST-1990-240210.3233/XST-1990-2402 ↗
6. 10.1557/JMR.1990.112310.1557/JMR.1990.1123 ↗
7. Breunig T. M., Elliott J. C., Anderson P., Davis G., Stock S. R., Guvenilir A., and Dover S. D.: In ‘New materials and their applications 1990’, (ed.Holland D.), 53-60; 1990, Bristol, Institute of Physics.
8. 10.1557/PROC-217-13510.1557/PROC-217-135 ↗
9. Breunig T. M., Elliott J. C., Stock S. R., Anderson P., Davis G. R., and Guvenilir A.: In ‘X-ray microscopy III’, 465-468; 1992, New York, Springer-Verlag.10.1007/978-3-540-46887-5_106 ↗
10. Stock S. R., Breunig T. M., Guvenilir A., Kinney J. H., and Nichols M. C.: In ‘Damage detection in composite materials’, 25-34; 1992, Philadelphia, ASTM.10.1520/STP14564S ↗
11. 10.1016/0010-4361(93)90165-510.1016/0010-4361(93)90165-5 ↗
12. Bowen D. K., Elliott J. C., Stock S. R., and Dover S. D.: In ‘X-ray imaging II’,Vol. 691, 94-98; 1986, San Diego, Society of Photo-Optical Instrumentation Engineers.10.1117/12.936625 ↗
13. Stock S. R. · Ceram. Trans · 1990 · 5 · 161
14. 10.1557/PROC-250-21510.1557/PROC-250-215 ↗
15. 10.1126/science.260.5109.78910.1126/science.260.5109.789 ↗
16. Lee S.-B. · 1993
17. 10.1557/JMR.1998.017210.1557/JMR.1998.0172 ↗
18. Breunig T. M., Stock S. R., Antolovich S. D., Kinney J. H., Massey W. N., and Nichols M. C.: Proc. 22nd Symp. on ‘Fracture mechanics’,Vol. 1, ASTM STP 1131, 749-761; 1992, Philadelphia, PA, ASTM.
19. Breunig T. M. · Mater. Eval · 1993 · 51 · 596
20. 10.1016/S1359-6454(96)00311-410.1016/S1359-6454(96)00311-4 ↗
21. 10.1046/j.1460-2695.1998.00062.x10.1046/j.1460-2695.1998.00062.x ↗
22. 10.1098/rsta.1999.046410.1098/rsta.1999.0464 ↗
23. Guvenilir A., Stock S. R., Barker M. D., and Betz R. A.: Proc. 4th Int. Conf. on ‘Aluminum alloys’: ‘Their physical and mechanical properties’, (ed. T. H. Sanders, Jr and E. A. Starke, Jr), Vol. II, 413-419; 1994, Atlanta, GA, Georgia Institute of Technology.
24. 10.1557/PROC-591-3110.1557/PROC-591-31 ↗
25. 10.1046/j.1365-2818.2003.01105.x10.1046/j.1365-2818.2003.01105.x ↗
26. Preuss M. · Acta Mater · 2003 · 50 · 3175
27. 10.1179/174328005X1437510.1179/174328005X14375 ↗
28. 10.1557/JMR.1995.038110.1557/JMR.1995.0381 ↗
29. 10.1063/1.36437410.1063/1.364374 ↗
30. 10.1146/annurev.ms.22.080192.00100510.1146/annurev.ms.22.080192.001005 ↗
31. Unpublished data, Lockheed Aeronautical Systems Co., Marietta, GA, USA, 1998.
32. Hatch J. E. (ed.): ‘Aluminum: properties and physical metallurgy’, 361–364; 1984, Metals Park, OH, ASM.
33. Peng P. · A · 1995 · 200 · 38
34. Stock S. R. · Adv. X-ray Anal · 2002 · 45 · 123
35. Ignatiev K. I. · 2004
36. 10.1080/1478643050015538710.1080/14786430500155387 ↗
37. Lerch B. A.: HiTEMP Review, NASA CP10051, Cleveland, OH, USA, October 1990, pp. 35-1-35-9.
38. 10.1016/0921-5093(95)07007-910.1016/0921-5093(95)07007-9 ↗
39. 10.1016/0921-5093(95)07010-910.1016/0921-5093(95)07010-9 ↗
40. Stock S. R. · Unpublished data · 2005