journal article·2009-02

Intelligent alloy design: Engineering single crystals superalloys amenable for manufacture

S. Tin

Materials Science and Technology· Volume 25· Issue 2
Publisher page

Abstract

The solidification characteristics of high refractory content nickel based superalloy single crystals have been studied over a wide range of composition. To assess the influence of composition on distribution coefficients, quantitative segregation mapping experiments have been conducted on as cast single crystals. Additionally, differential thermal analysis was utilised to measure the composition dependence of liquidus, solidus and γ′ solvus temperatures. Over the range of composition characteristic of the most advanced commercial single crystal alloys, synergistic interactions existing between select constituent elements were found to mitigate the severity of Re and W segregation during dendritic solidification. Minor additions of carbon, in the range of 0·05–0·15 wt-%, were also found to reduce the degree of Re and W segregation during solidification. In both instances, controlling the extent of Re and W segregation during solidification was shown to strongly influence the tendency of the alloy to form macroscopic grain defects, such as freckles, during unidirectional solidification. Moreover, precipitation of primary carbides within the mushy zone during solidification was also found to impact the solidification characteristics of the alloy. The implications of these alloying approaches for developing novel, high refractory content, single crystal superalloys compositions that are amenable for manufacturing are discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. 10.2514/1.1823910.2514/1.18239 ↗
2. Schafrik R. · Adv. Mater. Process · 2004 · 162 · 27
3. Walston W. S., O'Hara K. S., Ross E. W., Pollock T. M., and Murphy W. H. ‘Superalloys 1996’, 27-34; 1996, Warrendale, PA, TMS.10.7449/1996/Superalloys_1996_27_34 ↗
4. Walston W. S., Cetel A., MacKay R., O'Hara K., Duhl D., and Dreshfield R. ‘Superalloys 2004’, 15-24; 2004, Warrendale, PA, TMS.10.7449/2004/Superalloys_2004_15_24 ↗
5. Caron P. ‘Superalloys 2000’, 737-746; 2000, Warrendale, PA, TMS.10.7449/2000/Superalloys_2000_737_746 ↗
6. Erickson G. L. ‘Superalloys 1996’, 35-44; 1996, Warrendale, PA, TMS.10.7449/1996/Superalloys_1996_35_44 ↗
7. 10.1007/BF0266240010.1007/BF02662400 ↗
8. Gell M., Duhl D. N., and Giamei A. F. ‘Superalloys 1980’, 205-214; 1980, Warrendale, PA, American Society for Metals.10.7449/1980/Superalloys_1980_205_214 ↗
9. Darolia R., Lahrman D. F., and Field R. D. ‘Superalloys 1988’, 255-264; 1988, Warrendale, PA, TMS.10.7449/1988/Superalloys_1988_255_264 ↗
10. Rae C. M. F., Karunaratne M. S. A., Small C. J., Broomfield R. W., Jones C. N., and Reed R. C. ‘Superalloys 2000’, 767-776; 2000, Warrendale, PA, TMS.10.7449/2000/Superalloys_2000_767_776 ↗
11. Rae C. M. F., and Reed R. C.: Acta Mater. 2001, 49, 4113–4125.10.1016/S1359-6454(01)00265-8 ↗
12. 10.1016/S0921-5093(02)00637-810.1016/S0921-5093(02)00637-8 ↗
13. 10.1007/BF0258609710.1007/BF02586097 ↗
14. Yeh A. C., and Tin S. ‘Parsons 2003’, 673-686; 2003, London, IOM.
15. Yeh A. C., Rae C. M. F., and Tin S. ‘Superalloys 2004’, 677-686; 2004, Warrendale, PA, TMS.10.7449/2004/Superalloys_2004_677_685 ↗
16. 10.1007/s11661-005-0272-310.1007/s11661-005-0272-3 ↗
17. 10.1007/BF0264977710.1007/BF02649777 ↗
18. Pollock T. M., Murphy W. H., Goldman E. H., Uram D. L., and Tu J. S. ‘Superalloys 1992’, 125-134; 1992, Warrendale, PA, TMS.10.7449/1992/Superalloys_1992_125_134 ↗
19. Tin S., Pollock T. M., and King W. T. ‘Superalloys 2000’, 201-210; 2000, Warrendale, PA, TMS.10.7449/2000/Superalloys_2000_201_210 ↗
20. Tin S. · J. Mater. Sc
21. 10.1007/s11661-001-0151-510.1007/s11661-001-0151-5 ↗
22. Yu K. O., Oti J. A., Robinson M., and Carlson R. G. ‘Superalloys 1992’, 134-144; 1992, Warrendale, PA, TMS.
23. Wang W., Lee P. D., and McLean M.: Acta Mater. 2003, 51, 2971–2987.10.1016/S1359-6454(03)00110-1 ↗
24. 10.1007/BF0265228210.1007/BF02652282 ↗
25. Giamei A. F., and Kear B. H.: Metall Trans. 1970, 1, 2185–2192.10.1007/BF02643434 ↗
26. 10.1007/BF0264343510.1007/BF02643435 ↗
27. 10.1007/BF0264709910.1007/BF02647099 ↗
28. 10.1007/s11661-000-0199-710.1007/s11661-000-0199-7 ↗
29. 10.1007/s11661-997-0215-210.1007/s11661-997-0215-2 ↗
30. 10.1007/s11661-997-0214-310.1007/s11661-997-0214-3 ↗
31. Duhl D. N.: in ‘Superalloys, supercomposites and superceramics’, (ed.Tien J. K., and Caulfield T.), 149; 1988, New York, Academic Press.10.1016/B978-0-12-690845-9.50011-7 ↗
32. Meyerter Vehn M., Dedecke D., Paul U., and Sahm P. R. ‘Superalloys 1996’, 471-479; 1996, Seven Springs, PA, TMS.10.7449/1996/Superalloys_1996_471_479 ↗
33. Harrison R. W., and Karnitz M. A. ‘Gas turbine materials technology’, 13; 1998, Metals Park, OH, ASM Int.
34. Seth B. B. ‘Superalloys 2000’, 3-16; 2000, Warrendale, PA, TMS.10.7449/2000/Superalloys_2000_3_16 ↗
35. 10.1007/s11661-004-0066-z10.1007/s11661-004-0066-z ↗
36. 10.1007/s11661-003-0160-710.1007/s11661-003-0160-7 ↗
37. Brody H. D. · Trans. AIME · 1966 · 236 · 615
38. 10.1016/S0921-5093(97)00074-910.1016/S0921-5093(97)00074-9 ↗
39. Kurz W., and Fisher D. J. ‘Fundamentals of solidification’, 3rd edn, 289-293; 1992, Aedermannsdorf, Trans Tech Publications Ltd.
40. Milhalisin J. R., Corrigan J., Launsbach M., Leonard E., Baker R., and Griffin B. ‘Superalloys 2004’, 795-800; 2004, Warrendale, PA, TMS.10.7449/2004/Superalloys_2004_795_800 ↗
41. Sims C. T., Stoloff N. S., and Hagel W. C. ‘Superalloys II'; 1986, New York, John Wiley and Sons.