journal article·2013-08

Annealing effect on microstructure and mechanical properties of magnetron sputtering Ti–Si–C thin film

Z S Chen, H J Li, Q G Fu, D Yang, Q L Shen

Materials Science and Technology· Volume 29· Issue 8
Publisher page

Abstract

To investigate the influence of temperature on nucleation and growth of Ti3SiC2, Ti–Si–C thin films were deposited by magnetron sputtering from elemental targets of Ti, Si and C on Si(100) and Al2O3 substrates at temperature <200°C. Subsequently, the as deposited films were annealed in vacuum at 800, 950, 1100 and 1200°C respectively. The as deposited films consisted of amorphous TiC, amorphous Si and free C, as determined by X-ray diffraction and X-ray photoelectron spectroscopy. Annealing in vacuum <950°C resulted in improved crystallinity of TiC and formation of SiCx and Ti5Si3 phases. However, the Ti3SiC2 phase forms in films at 1100°C owing to the increase in Si diffusion coefficient. Moreover, the evolution of hardness and elastics modulus with annealing temperatures was determined by nanoindentation. The results showed a continuous decline of film hardness with increasing annealing temperature due to the formation of Ti3SiC2 and Ti5Si3 phases.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: MXene and MAX Phase Materials · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Solidification Processing Carbon/Carbon Composites Research Center, Northwestern Polytechnical University, Xi'an 710072, China

References (27)

Show source-provided references
1. 10.1111/j.1151-2916.1999.tb02166.x10.1111/j.1151-2916.1999.tb02166.x ↗
2. 10.1016/S0022-3697(98)00226-110.1016/S0022-3697(98)00226-1 ↗
3. 10.1016/0167-577X(94)90037-X10.1016/0167-577X(94)90037-X ↗
4. 10.1023/A:100885322098910.1023/A:1008853220989 ↗
5. 10.1016/S0169-4332(02)01195-910.1016/S0169-4332(02)01195-9 ↗
6. 10.1016/0025-5408(87)90128-010.1016/0025-5408(87)90128-0 ↗
7. 10.1002/1521-3862(200011)6:6<289::AID-CVDE289>3.0.CO;2-410.1002/1521-3862(200011)6:6<289::AID-CVDE289>3.0.CO;2-4 ↗
8. 10.1016/j.ceramint.2007.01.00510.1016/j.ceramint.2007.01.005 ↗
9. 10.1016/j.surfcoat.2006.09.04010.1016/j.surfcoat.2006.09.040 ↗
10. 10.1016/j.tsf.2004.09.04310.1016/j.tsf.2004.09.043 ↗
11. 10.1016/j.wear.2007.06.01310.1016/j.wear.2007.06.013 ↗
12. 10.1111/j.1151-2916.2002.tb00474.x10.1111/j.1151-2916.2002.tb00474.x ↗
13. 10.1016/j.tsf.2006.06.01510.1016/j.tsf.2006.06.015 ↗
14. 10.1063/1.179057110.1063/1.1790571 ↗
15. 10.1016/j.msea.2006.05.05310.1016/j.msea.2006.05.053 ↗
16. 10.1103/PhysRevB.80.23510810.1103/PhysRevB.80.235108 ↗
17. 10.1016/S0169-4332(01)00491-310.1016/S0169-4332(01)00491-3 ↗
18. 10.1016/j.wear.2010.04.00310.1016/j.wear.2010.04.003 ↗
19. 10.1016/S0257-8972(02)00477-210.1016/S0257-8972(02)00477-2 ↗
20. 10.1016/j.surfcoat.2004.08.17410.1016/j.surfcoat.2004.08.174 ↗
21. 10.1016/j.jcrysgro.2007.02.01410.1016/j.jcrysgro.2007.02.014 ↗
22. 10.1063/1.36670710.1063/1.366707 ↗
23. 10.1007/BF0264907610.1007/BF02649076 ↗
24. 10.1557/JMR.1994.009610.1557/JMR.1994.0096 ↗
25. 10.1016/S0169-4332(97)00703-410.1016/S0169-4332(97)00703-4 ↗
26. 10.1016/j.ijrmhm.2008.10.00110.1016/j.ijrmhm.2008.10.001 ↗
27. 10.1111/j.1151-2916.1996.tb08018.x10.1111/j.1151-2916.1996.tb08018.x ↗