Effects of simulated on line accelerated cooling processing on transformation temperatures and microstructure in microalloyed steels Part 2—Plate processing
Source abstract
Abstract
The effects of three on line accelerated cooling parameters (accelerated cooling start temperature TA, cooling rate Ṫ, and cooling interrupt temperature T1) on transformation temperatures and microstructure in a low carbon microalloyed plate steel were studied by laboratory simulations in a quench deformation dilatometer. Varying the on line accelerated cooling parameters changes the austenite condition and transformation path. In general, the transformation path shifts from polygonal ferrite towards bainite with increasing TA, increasing Ṫ, and decreasing T1. There is also a corresponding refinement in the microstructure and increase in hardness. In comparison with the laboratory thermomechanical processing treatments, the multipass industrial rolling schedule produces a much more heavily deformed austenite structure than laboratory thermomechanical processing treatments, which would favour high transformation temperatures, fine polygonal ferrite microstructure, and lower hardness.MST/3425
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. I. TAMURA (ed.): ‘Physical metallurgy of thermomechanical processing of steel and other metals—THERMEC-88’; 1988, Tokyo, Iron and Steel Institute of Japan.
2. A. J. DeARDO (ed.): ‘Processing, microstructure and properties of microalloyed and other modern high strength low alloy steels’; 1992, Warrendale, PA, Iron and Steel Society.
3. K. A. TAYLOR, S. W. THOMPSON, and F. B. FLETCHER (eds.): ‘Physical metallurgy of direct-quenched steels’; 1993, Warrendale, PA, TMS.
4. R. ASFAHANI and G. TITHER (eds.): ‘Low-carbon steels for the 90's’; 1993, Warrendale, PA, TMS.
5. G. E. RUDDLE, B. VOYZELLE, J. T. BOWKER, and L. E. COLLINS: IN ‘Proceedings of 34th mechanical working and steel processing conference’, Vol. 30, 19–30; 1993, Warrendale, PA, Iron and Steel Society.
6. COLLINS L. E. · 1984 · 84
7. 10.1179/mst.1996.12.10.80810.1179/mst.1996.12.10.808 ↗
8. 10.1007/BF0267256410.1007/BF02672564 ↗
9. Y. E. SMITH, A. P. COLDREN, and R. L. CRYDERMAN: in ‘Toward improved ductility and toughness’, 119–142; 1971, Ann Arbor, MI, Climax Molybdenum.
10. 10.1179/mst.1991.7.7.62210.1179/mst.1991.7.7.622 ↗