Residual stress and microstructural features of friction-stir-welded GL E36 shipbuilding steel
Source abstract
Abstract
The purpose of the present study was to fulfil the knowledge gap concerning residual stresses evaluation of friction stir welded GL E36 shipbuilding steel. Plates of 6 mm thickness were welded using two different welding speeds (1 and 3 mm s −1 ) at a constant rotational speed of 500 rev min −1 . This led to different thermal cycles and the objective is to analyse the resulting microstructures and residual stress states. Therefore, in this work, residual stresses were evaluated by X-ray diffraction; metallography and microhardness testing were performed to support these measurements. Results showed that welds produced with different heat inputs have distinguishable residual stress distributions. Increases in the welding speed led to higher residual stress and microhardness in the stir zone.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Materials Mechanics, Solid State Joining Processes (WMP), Helmholtz-Zentrum Geesthacht, Institute of Materials Research, Geesthacht, Germany
Physical Metallurgy Laboratory (LAMEF), Post-graduation Program in Mining, Metallurgical and Materials Engineering (PPGE3M), Federal University of Rio Grande do Sul (UFRGS), Porto Alegre, Brazil
Regional Integrated University (URI), Erechim, Brazil
Federal Institute of Rio Grande do Sul (IFRS), Caxias do Sul, Brazil
Funding
CNPq
References (43)
Show source-provided references
1. Thomas WM, Nicholas ED, Needham JC, Friction-stir butt welding. GB Patent No. 9125978.8, International patent application No. PCT/GB92/02203, 1991.
2. 10.1179/136217109X42130010.1179/136217109X421300 ↗
3. 10.1016/j.jmapro.2013.04.00210.1016/j.jmapro.2013.04.002 ↗
4. 10.1179/095066010X1277720587575010.1179/095066010X12777205875750 ↗
5. 10.1016/j.mser.2005.07.00110.1016/j.mser.2005.07.001 ↗
6. 10.1016/j.pmatsci.2008.05.00110.1016/j.pmatsci.2008.05.001 ↗
7. Pradeep A. · Int J Eng Res Dev · 2012 · 3 · 75
8. Lohwasser D · 2009
9. Kumar N, Mishra R, Baumann J. Residual stresses in friction stir welding: a volume in the friction stir welding and processing book series, 2013.10.1016/B978-0-12-800150-9.00006-6 ↗
10. 10.1016/j.proeng.2013.12.07310.1016/j.proeng.2013.12.073 ↗
11. 10.1080/13621718.2017.128895310.1080/13621718.2017.1288953 ↗
12. 10.1016/j.wear.2017.01.07010.1016/j.wear.2017.01.070 ↗
13. 10.1590/0104-9224/si2201.0510.1590/0104-9224/si2201.05 ↗
14. Cunha PHCP. Caracterização de juntas soldadas da liga de aço naval GL E36 obtidas através do processo de soldagem por fricção e mistura mecânica [PhD thesis]. Porto Alegre, RS, Brazil: Federal University of Rio Grande do Sul; 2014.
15. Hu ZM, Brooks PBJW. Residual stresses in friction stir welding. 2004 ABAQUS Users’ Conference. 2004.
16. 10.1016/j.msea.2012.01.01610.1016/j.msea.2012.01.016 ↗
17. 10.1007/s11661-011-0643-x10.1007/s11661-011-0643-x ↗
18. 10.1007/BF0326640510.1007/BF03266405 ↗
19. 10.1016/S1359-6454(03)00319-710.1016/S1359-6454(03)00319-7 ↗
20. 10.1016/S1359-6462(03)00024-110.1016/S1359-6462(03)00024-1 ↗
21. 10.1016/j.physb.2004.03.12810.1016/j.physb.2004.03.128 ↗
22. 10.1016/j.msea.2015.09.02010.1016/j.msea.2015.09.020 ↗
23. 10.1016/j.jmatprotec.2005.12.01310.1016/j.jmatprotec.2005.12.013 ↗
24. Buffa G, Frantini L, Pasta S. Residual stresses in friction stir welding: numerical simulation and experimental verification. Invited paper at ICRS-8 8th International Conference on Residual Stresses; Colorado, USA; 2008.
25. Lienert T, Stellwag WJr, Lehman L, editors. Comparison of heat inputs: friction stir welding vs. arc welding. AWS Conference; 2002.
26. Hauk V. · 1997
27. Arbegast WJ. Hot deformation of aluminum alloys. Warrendale ( PA): TMS; 2003, p. 313.
28. 10.1179/174328009X41113610.1179/174328009X411136 ↗
29. 10.1016/j.msea.2012.12.01410.1016/j.msea.2012.12.014 ↗
30. 10.1016/j.scriptamat.2006.12.00410.1016/j.scriptamat.2006.12.004 ↗
31. Bhadeshia HKDH · 2006
32. 10.1016/j.msea.2006.02.03810.1016/j.msea.2006.02.038 ↗
33. T. W. Institute. International Institute of Welding. Abington; 1985.
34. Linnert GE. Fundamentals welding metallurgy. AWS; 1994.
35. 10.1016/j.micron.2012.11.00410.1016/j.micron.2012.11.004 ↗
36. 10.1179/13621710322500912510.1179/136217103225009125 ↗
37. 10.1016/j.matdes.2014.04.06610.1016/j.matdes.2014.04.066 ↗
38. 10.1007/s11661-012-1110-z10.1007/s11661-012-1110-z ↗
39. 10.1590/S1516-1439201400500007710.1590/S1516-14392014005000077 ↗
40. Lemos GVB. Análise de tensões residuais em eixos automotivos do aço DIN 38B3 temperados por indução, Porto Alegre; Universidade Federal do Rio Grande do Sul; 2012.
41. Weiss K · Adv Mater Process · 1999 · 156 · H19
42. 10.1179/02670830110150998010.1179/026708301101509980 ↗
43. Moore MG · Trans SAE · 1958 · 66 · 340