journal article·1999-04

Steady state creep deformation behaviour of SiC particle reinforced 2618 aluminium alloy based composites

S.C. Tjong, Z.Y. Ma

Materials Science and Technology· Volume 15· Issue 4
Publisher page

Abstract

Tensile creep behaviour of 2618 aluminium alloy based composites reinforced with 15 vol.-%SiC particles (SiC p) of 3·5 and 10 μm at 423–673 K was investigated. The results showed that the composites reinforced with both small and large SiC particles exhibited apparent stress exponents of 7·1–10·2 and 8·3–25·2, and apparent activation energies of 314 kJ mol-1 and 344 kJ mol-1, respectively. Moreover, a critical stress was observed in the composite specimens, below which the creep resistance of the 2618 + SiCp (3·5 μm) composite was higher than that of the 2618 + SiCp (10 μm) composite. Above this value, the former was less creep resistant than the latter. Several established models were used to rationalise the creep data of these two composites at higher temperatures. The analyses revealed that the creep data for the 2618 + SiC (3p·5 μm) composite cannot be rationalised with a stress exponent of 8 or 5, while those for the 2618 + SiC (10 pμm) composite can be reasonably rationalised by a climb controlled dislocation creep model with a stress exponent of 5. On the other hand, the 2618 + SiCp (10 μm) composite crept at lower temperatures (below 0·51Tm , where Tm is the melting point of aluminium in Kelvin) exhibited stress exponents of 13·0 and 6·5 at 423 and 473 K, and activation energies of 85 and 182 kJ mol-1 in the vicinity of 423 and 473 K, respectively. The creep behaviour of the 2618 + SiCp (10 μm) composite at 423 K can be interpreted in terms of the dislocation pipe diffusion.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. 10.1007/BF0264289010.1007/BF02642890 ↗
2. 10.1007/BF0264439610.1007/BF02644396 ↗
3. 10.1007/BF0264622710.1007/BF02646227 ↗
4. 10.1115/1.322603310.1115/1.3226033 ↗
5. 10.1115/1.322603210.1115/1.3226032 ↗
6. 10.1016/0956-7151(90)90082-R10.1016/0956-7151(90)90082-R ↗
7. 10.1016/0956-716X(90)90433-H10.1016/0956-716X(90)90433-H ↗
8. 10.1016/0956-7151(92)90190-P10.1016/0956-7151(92)90190-P ↗
9. 10.1007/BF0264725810.1007/BF02647258 ↗
10. 10.1016/0956-7151(93)90094-910.1016/0956-7151(93)90094-9 ↗
11. 10.1016/0956-7151(92)90348-I10.1016/0956-7151(92)90348-I ↗
12. 10.1007/BF0265949710.1007/BF02659497 ↗
13. 10.1007/BF0266391210.1007/BF02663912 ↗
14. 10.1007/BF0266667010.1007/BF02666670 ↗
15. 10.1016/0266-3538(89)90091-210.1016/0266-3538(89)90091-2 ↗
16. 10.1016/0956-716X(95)00016-O10.1016/0956-716X(95)00016-O ↗
17. 10.1007/s11661-997-0046-110.1007/s11661-997-0046-1 ↗
18. 10.1179/mst.1995.11.2.16310.1179/mst.1995.11.2.163 ↗
19. 10.1179/03063457579044505310.1179/030634575790445053 ↗
20. KERBY O. D. · Metall. Trans. A · 1997 · 8 · 843
21. 10.1063/1.172880810.1063/1.1728808 ↗
22. MUKHERJEE A. K. · Trans. ASM · 1969 · 62 · 155
23. 10.1007/BF0266944110.1007/BF02669441 ↗
24. H. J. FROST and M. F. ASHBY: ‘Deformation mechanism maps’, 1982, London, Pergamon.
25. 10.1016/S1359-6462(96)00454-X10.1016/S1359-6462(96)00454-X ↗