Influence of aluminium and thermomechanical treatment on formability and mechanical properties of type 430 stainless steel
Source abstract
Abstract
AbstractAbstractThe influence of aluminium (0–0·3 wt-%) on the formability and mechanical properties of type 430 stainless steel was evaluated. Also, the effect of thermomechanical parameters such as hot band annealing and coiling temperature was examined at three different aluminium levels. Some comparisons are made between the processing routes for the deep drawing of carbon steel sheet andferritic stainless steel sheet. It is concluded that any influence that aluminium has on the engineering properties of these alloys depends on the thermomechanical processing treatment selected. Low hot finishing temperatures and no hot band annealing are detrimental to texture and sheet metal formability. Finishing temperatures of ~900 to 950°C coupled with relatively low coiling temperatures (~650°) result in the best formability, although the improvement in texture is not marked. The optimum aluminium levelfor the alloys studied appears to be about 0·1%. Fine dispersions of carbide and nitride precipitates are necessary to produce a relatively fine, uniformly equiaxed grain size, which is the optimum for deep drawing and stretching operations.MST/1931
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. 10.1179/imr.1988.33.1.22110.1179/imr.1988.33.1.221 ↗
2. J. KUTKA: in Proc. Conf. 'Stainless steel '77', 49–56; 1977, London, The Metals Society.
3. 10.1007/978-3-7091-8965-810.1007/978-3-7091-8965-8 ↗
4. J. HARASE, K. OHTA, T. TAKESHITA, R. SHIMIZU, and T. SUZUKI: in Proc. Int. Conf. on 'Physical metallurgy of thermomechanical processing of steels and other metals', THERMEC 88, 864–871; 1988, Tokyo, Iron and Steel Institute of Japan.
5. J. HARASE, K. OHTA, T. TAKESHITA, and Y. KAWANICE in Proc. Conf. 'Stainless steels '91', 856–863; 1991, Tokyo, Iron and Steel Institute of Japan.
6. T. SAWATANI, M. ISHII, II. YOSIIIMURA, T. ASHIURA, A. YANIAMOTO, and M. WAKAMATSU: 'New developments in stainless steel technology', 269–282; 1984, Metals Park, OH, ASM.
7. HARASE J. · J. Iron Steel Inst. Jpn · 1990 · 76 · 152810.2355/tetsutohagane1955.76.9_1528 ↗
8. R. H. KALTENHAUSER: in 'Source book on the ferritic stainless steels', 212–218; 1982, Metals Park, OH, ASM.
9. Y. D. TEE: in Proc. Conf. 'Recrystallisation '90', (ed. T. Chandra, 345–440; 1990, Warrendale, PA, The Minerals, Metals and Materials Society.
10. H. J. McQUEEN, E. EVANGELISTA, P. MENGUCCI, N. D. RYAN, and T. BOWLES: in Proc. Conf. 'Applications of stainless steel '92', 924–933; 1992, Stockholm, Swedish Institute of Metals.
11. 'Metals handbook', 8 edn, Vol. 1, 'Properties and selection of metals', 543–552; 1961, Metals Park, OH, ASM.
12. BLECK W. · Steel. Res. · 1991 · 62 · 58010.1002/srin.199100453 ↗
13. HöLscHER H. · Steel Res. · 1991 · 62 · 56710.1002/srin.199100451 ↗
14. NOWAK C. · Steel. Res. · 1991 · 62 · 57610.1002/srin.199100452 ↗
15. 10.1007/BF0265025510.1007/BF02650255 ↗
16. 10.1179/03071698380329181110.1179/030716983803291811 ↗
17. D. T. LLEWELYN: 'Steels: metallurgy and applications', 19–23; 1992, Oxford, Butterworth-Heinemann.
18. KADO S. · Trans. Iron Steel Inst. fpn · 1979 · 19 · 31510.2355/isijinternational1966.19.315 ↗
19. ATKINSON M. · Sheet Met. Ind. · 1967 · 44 · 167
20. NERUDA P. R. · Met. Prog. · 1971 · 54
21. F. HAESSNER (ed.): 'Recrystallisation of metallic materials', 129; 1978, Dr Rieder Verlag, GmbH, Stuttgart.
22. F. B. PICKERING: in 'The metallurgical evolution of stainless steels', 274–283; 1979, London, The Metals Society.