journal article·2006-12

Direct chill rheocasting (DCRC) of AZ31 Mg alloy

S. M. Zhang, Z. Fan, Z. Zhen

Materials Science and Technology· Volume 22· Issue 12
Publisher page

Abstract

A new processing technology, direct chill rheocasting (DCRC), has recently been developed by BCAST at Brunel University, for production of high quality Mg alloy billets and slabs. In the present paper the authors present the DCRC process and experimental results on microstructure and mechanical properties of DCRC billets. Basically, the DCRC process consists of a high quality semisolid slurry supply system, continuously feeding a conventional direct chill caster, to produce billets or slabs. Experimental results show that the DCRC billets have a fine and uniform microstructure throughout the cross section, the average grain size being ∼50 μm. Direct extrusion of the DCRC billets was conducted to assess the deformability and mechanical properties after extrusion. The average grain size is <3 μm in the as extruded state. The increased deformability of the DCRC billets has been attributed to the fine and uniform microstructure, while the improved mechanical properties of the extruded product is attributed to the fine grain size.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Cole G. S.: Mater. Set Forum, 2003, 419-422, 34.10.4028/www.scientific.net/MSF.419-422.43 ↗
2. Agnew S. R.: J. Met., May 2004, 20.10.7748/ns.19.5.20.s40 ↗
3. Friedrich H., and Schumann S.: Proc. IMA 2001 Magnesium Conf., Brussels, Belgium, May 2001, International Magnesium Association, 8.
4. Schumann S., and Friedrich H.: Mater. Set Forum, 2003, 419-422, 51.10.4028/www.scientific.net/MSF.419-422.51 ↗
5. 10.4028/www.scientific.net/MSF.426-432.51510.4028/www.scientific.net/MSF.426-432.515 ↗
6. Mueller K. B.: in ‘Magnesium technology 2003’, (ed.Kaplan H. I.), 247; TMS, 247.
7. 10.4028/www.scientific.net/MSF.426-432.62910.4028/www.scientific.net/MSF.426-432.629 ↗
8. Liang D., and Cowley C. B.: J. Met., May 2004, 26.10.1007/s11837-004-0122-6 ↗
9. Fan Z., Bevis M. J., and Ji S.: PCT patent WO 01/21343 Al, 1999.
10. Fan Z., Ji S., and Liu G.: Mater. Set Forum, 2005, 488-489,405–412.10.4028/www.scientific.net/MSF.488-489.405 ↗
11. Fan Z., Ji S., and Bevis M. J.: PCT patent WO 02/13993 Al, 2000.
12. 10.1007/s10853-006-6248-x10.1007/s10853-006-6248-x ↗
13. Lee P. D.: Private communication, Department of Materials, Imperial College, London, 2003.
14. 10.1007/s11661-999-0098-510.1007/s11661-999-0098-5 ↗
15. 10.1016/j.actamat.2005.05.03310.1016/j.actamat.2005.05.033 ↗
16. Qin R. S., and Fan Z.: Proc. 6th Int. Conf. on ‘Semi-solid processing of alloys and composites’, Turin, Italy, September 2000, Unione Industriale di Torino,819–824.
17. 10.1016/S1359-6454(02)00305-110.1016/S1359-6454(02)00305-1 ↗
18. 10.1016/S1359-6454(01)00297-X10.1016/S1359-6454(01)00297-X ↗
19. 10.2320/matertrans.42.117710.2320/matertrans.42.1177 ↗
20. 10.1016/S1359-6462(00)00627-810.1016/S1359-6462(00)00627-8 ↗
21. 10.1016/S1359-6454(03)00005-310.1016/S1359-6454(03)00005-3 ↗
22. 10.1016/j.scriptamat.2003.10.00610.1016/j.scriptamat.2003.10.006 ↗
23. Mukai T., Matsuoka S., Miyamoto S., and Oki Y.: Mater. Sci. Forum, 2003, 419-422, 349.10.4028/www.scientific.net/MSF.419-422.349 ↗
24. Swiostek J., Bohlen J., and Kainer K. U.: Proc. 6th Int. Conf. on ‘Magnesium alloys and their applications’, (ed.Kainer K. U.), 278; 2003, Weinheim, Wiley-VCH.10.1002/3527603565.ch43 ↗
25. den Bakker A. J., Sillekens W. H., Bohlen J., Kainer K. U., and Barton G.: Proc. 6th Int. Conf. on ‘Magnesium alloys and their applications’, (ed.Kainer K. U.), 324; 2003, Weinheim, Wiley-VCH.10.1002/3527603565.ch50 ↗