Through thickness residual stresses in large rolls and sleeves for metal working industry
Source abstract
Abstract
There is little experimental knowledge about the initial state of through thickness residual stresses in rolls and sleeves for the steel rolling industry. This is surprising bearing in mind the impact that residual stress has on the performance of the roll and sleeve materials in the highly aggressive loading environments of the metal working industry. Previous work has been confined to measurement of very near surface residual stresses and numerical predictions of residual stress distributions. In the present paper through thickness residual stress measurements were carried out using a deep hole drilling technique on a series of rolls and sleeves representative of those used in the rolling industry. Different features of the manufacturing processes used in their production are shown to influence the magnitude and distribution of the residual stresses. It is also shown that the measurements can be used, together with a finite element analysis, to determine the volumetric distribution of the residual stresses.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Solid Mechanics GroupDepartment of Mechanical Engineering, University of Bristol, BS8 ITR, UK
Solid Mechanics GroupDepartment of Mechanical Engineering, University of Bristol, BS8 ITR, UK;, Email: David.Smith@Bristol.ac.uk
References (37)
Show source-provided references
1. Gene E. L.: in ‘Rolls for the metal working industries’, (ed. Lee G. E.), 2002, Warrendale, PA, Iron and Steel Society.
2. Saha J. K., Sourabh K., Chandra S., Sinha S. K., Singhal U., and Das A. K.: ISIJ Int. 2005, 45, 1641–1650.10.2355/isijinternational.45.1641 ↗
3. 10.1016/j.engfailanal.2003.11.00510.1016/j.engfailanal.2003.11.005 ↗
4. 10.1016/S1350-6307(99)00004-710.1016/S1350-6307(99)00004-7 ↗
5. 10.1007/s11661-998-0117-y10.1007/s11661-998-0117-y ↗
6. 10.1080/0149573970895611910.1080/01495739708956119 ↗
7. Miller K. J. · J. Mater. Des. Appl · 2003 · 217 · 1
8. Horvath P. J., and Chilton J. M. ‘Measurement of residual stress state in rolls’, 16-19; 1983, Houston, TX, Iron Steelmaker.
9. Schroder K. H. ‘Heavy spalls originating in the cores of high chromium rolls’, MPT issue no 211986; D-4000 Dsseldort, Verlag Stahleisen.
10. 10.1007/BF0246703810.1007/BF02467038 ↗
11. 10.1007/BF0246365710.1007/BF02463657 ↗
12. Honeyman G. A., Lowe E. M., and Marston L. W.: Proc. 39th Conf. on ‘Mechanical woorking and steel processing’, Indianaplis, IN, USA, October 1997, ISS,397–413.
13. Magnee A., Lecomte-Mertens C., Gaspard C., and Cosse P.: Proc. 3rd Int. Cong. on ‘Heat treatment of materials’, Shanghai, China, November 1983, The Metals Society London,245–257.
14. 10.1007/BF0264650110.1007/BF02646501 ↗
15. 10.2355/isijinternational1966.28.6810.2355/isijinternational1966.28.68 ↗
16. Jacot A. · Metall Mater. Trans. A · 2000 · 31 · 120110.1007/s11661-000-0233-9 ↗
17. Kandill F. A. · 2001
18. 10.1179/02670830110150998010.1179/026708301101509980 ↗
19. Pacyna J. · NDT.net · 1999 · 4 · 8
20. Shtal'man M. V. Met. ScL Heat Treat., 1962, 4,331–332.10.1007/BF00814436 ↗
21. Tiitto K.: Proc. 27th Conf. on ‘Mechanical working and steel processing’, Cleveland, OH, USA, October 1985, The Iron and Steel Society,273–279.
22. 10.2355/isijinternational1966.21.9210.2355/isijinternational1966.21.92 ↗
23. 10.1243/03093247V31317710.1243/03093247V313177 ↗
24. Hill M. R., and Nelson D. V. ‘The inherent strain method for residual stress determination and its application to a long weld joint’, 343-352; 1995, New York, American Society of Mechanical Engineers, Pressure Vessels and Piping Division.
25. Jimbo Y.: Proc. 33rd Conf. on ‘Mechanical working and steel processing’, St. Louis, MO, USA, October 1991, Iron and Steel Society of AIME,187–190.
26. Bonner N. W. · 1996
27. 10.1111/j.1747-1567.1992.tb00701.x10.1111/j.1747-1567.1992.tb00701.x ↗
28. Beaney E. M. ‘Measurement of sub-surface stresses’, Report RD/ B/N 4323, Central Electricity Generating Board, Marchwood, UK, 1978.
29. Zhdanov I. M. · Autom. Weld · 1978 · 31 · 22
30. 10.1520/JAI1256810.1520/JAI12568 ↗
31. Smith D. J., and Bonner N. W.: Proc. 2nd Int. Conf. on ‘Integrity assessment’, Glasgow, UK, May 1994, Dynamic Testing Agency,259–274.
32. 10.1243/030932400151442210.1243/0309324001514422 ↗
33. 10.1243/030932404189652410.1243/0309324041896524 ↗
34. Bonner N. W., and Smith D. J. ‘Measurement of residual stresses using the deep hole method’, 53-65; 1996, New York, American Society of Mechanical Engineers, Pressure Vessels and Piping Division.
35. Hossain S. · 2005
36. Simandjuntak S., Ficquet X., Pavier M. J., Truman C. E., and Smith D. J.: Proc. 3rd Int. Conf. on ‘Integrity of high temperature welds’, London, UK, April 2007, IOM Communications Ltd,77–88.
37. ‘ABAQUS user manuals version 6.5’, Hibbitt, Karlsson and Sorenson Inc, 02860-4847, Pawtucket, RI, USA, 2006.