journal article·2014-06

Architectured bimetallic laminates by roll bonding: Bonding mechanisms and applications

A. Kaabi, Y. Bienvenu, D. Ryckelynck, L. Prévond, B. Pierre

Materials Science and Technology· Volume 30· Issue 7
Publisher page

Abstract

Manufacturing of bimetallic laminates (<2 mm) with an internal architecture by roll bonding allows to obtain a compromise of conflicting properties. Two applications are considered: copper–steel–copper sheets for high power electronic component substrates and lightweight aluminium–steel–aluminium laminates for structural, electromagnetic applications in power generation and for electromagnetic compatibility. They have in common an architecture, with three-dimensional percolating networks of two metals produced with a sufficient precision. The bonding mechanisms are investigated through microstructural and thermomechanical characterisation of the assemblies produced. Roll bonding fills the voids in a central component by plastic deformation and creates the bonds by cold welding. It may be followed or preceded by surface and heat treatments with the objective to improve the cold welding and to relieve the internal stress state. Architectural rules to optimise the properties of the two-phase laminates in view of the applications may be guided by finite element models combining physical and thermomechanical aspects.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Mines-ParisTech, CNRS UMR7633, Evry, France

SATIE-Cnam, CNRS UMR8029, Paris, France

Griset S.A., Villers Saint-Paul, France

References (30)

Show source-provided references
1. Sar S., and Monnier C. ‘unpublished results of patent search’, Report to A.N.R., France, December 2012.
2. Kaabi A. ‘Architectured substrate and composite lead-free solder for power electronic of electrical and hybrid vehicles: design & processes’, PhD thesis, Mines-ParisTech, Paris, France, 2011.
3. Bienvenu Y., Kaabi A., Ryckelynck D., Idrac J., Font E., and Pierre B. ‘Architectural rules for the assembly of miniature laminated two phase components by hot pressing and by roll bonding’, 140–145; 2010, Aachen, DVS Berichte.
4. Young R., Bailey C., Cooper P., Harrington M., Starke T., Stirling C., Stockham N., and Beck C. ‘Developments and trends in thermal management technology – a mission to the USA’, DTI Global Watch Missions, USA, December 2006.
5. Zweben C. · Power Electron. Technol. · 2006 · 3 · 40
6. Occhionero M. A., Hay R. A., Adams R. W., and Fennessy K. P. ‘Cost-effective manufacturing of aluminum silicon carbide (AlSiC) electronic packages’, Proc. Int. Symp. on ‘Advanced packaging materials’, Braselton, GA, USA, March 1999, IEEE, 118–124.10.1109/ISAPM.1999.757298 ↗
7. Saums D. L. ‘Developments in selective high thermal conductivity orientation in CTE compatible substrate and package component materials’, Proc. 20th Annual IEEE Semiconductor Thermal Measurement and Management Symp., San Jose, CA, USA, March 2004, IEEE, Vol. 20, 38–45.10.1109/STHERM.2004.1291299 ↗
8. Occhionero M. A., Adams R., Fennessy K., and Hay R. A. ‘Aluminium silicon carbide (AlSiC) for advanced microelectronic packages’, Proc. IMAPS, Boston Meeting, Boston, MA, USA, May 1998, Ceramics Process Systems Corp. 6.
9. Zweben C. ‘Advanced composites and other advanced materials for electronic packaging thermal management’, Proc. IMAPS International Symposium on Advanced Packaging Materials, Braselton, GA, USA, March 2001, IEEE. 360–365.10.1109/ISAOM.2001.916602 ↗
10. Saums D. L., Edward B., Ruzicka P., Fennessy K., Hay R., Zimmer J., and Sundberg G. J. ‘Diamond pins utilized as thermal vias for high heat flux spreading in CTE-compatible lids and substrates for semiconductor packaging’, 22nd Annual IEEE Semiconductor Thermal Measurement and Management Symp., Dallas, TX, USA, March 2006, IEEE, 14–16.
11. Zweben C. · Encycl. Mater. Sci. Technol. · 2001 · 3 · 2676
12. Torrey Hills Technologies, Saneway Series of Advanced Heat Sink Materials. www.torreyhillstech.com
13. 10.1016/B0-08-042993-9/00132-710.1016/B0-08-042993-9/00132-7 ↗
14. Carpentier F. ‘A study of the adhesion mechanisms in cold roll-bonding of bimetals’, PhD thesis, Mines-ParisTech, France, 1993.
15. O'Brien R. L. ‘Welding handbook’, Vol. 2, 8th edn, 772; 1991, Miami, FL, American Welding Society.
16. Wordara J. · Schweisstechnick · 1965 · 15 · 411
17. Bay N. ‘Cold pressure welding – a theoretical model for the bond strength’, Proc. Spring Residential Conf. on ‘Joining of metals, practice and performance’, Coventry, UK, April 1981, Vol. 2, 47–62.
18. Vaidyanath L. R. · Br. Weld. J. · 1960 · 7 · 1
19. Vaidyanath L. R. · Br. Weld. J. · 1959 · 6 · 13
20. 10.1179/mtlr.1962.7.1.43310.1179/mtlr.1962.7.1.433 ↗
21. Cave J. A. · J. Inst. Met. · 1973 · 101 · 203
22. Bay N. · Met. Constr. · 1986 · 18 · 486
23. 10.1007/s11669-004-0074-010.1007/s11669-004-0074-0 ↗
24. European Patent: ‘Procédé de fabrication d’un assemblage métallique’, CNRS-Cnam-ENS Cachan, EP 2544891/WO S20110687(A1), January 16, 2013.
25. 10.1016/j.jmatprotec.2011.06.01010.1016/j.jmatprotec.2011.06.010 ↗
26. French Patent: ‘Matériau composite multicouche utilisé pour la fabrication de substrats de modules électroniques et procédés de fabrication correspondant’, Armines-LNE-Griset, No. 2951020, April 2011.
27. Pergande A., and Rock J. ‘Advances in Passive PCB Thermal Control’, Proc. ‘Aerospace Conference’, Big Sky, MT, USA, March 2011, IEEE, 1–10.10.1109/AERO.2011.5747312 ↗
28. Long L. · Sci. Technol. Adv. Mater. · 2008 · 9 · 11
29. 10.1007/s11666-012-9756-z10.1007/s11666-012-9756-z ↗
30. 10.1179/1743284712Y.000000009110.1179/1743284712Y.0000000091 ↗