Effect of Mo on microstructure and mechanical properties of bulk nanocrystalline Fe3Al materials prepared by aluminothermic reaction
Source abstract
Abstract
Bulk nanocrystalline Fe3Al based materials with 5, 10 and 15 wt-Mo were prepared by aluminothermic reaction. The microstructure and mechanical properties of the materials were investigated. It was shown that the materials consisted of a nanocrystalline matrix phase that was composed of Fe, Al and Mo and a little Al2O3 contamination phase. The nanocrystalline phase had a disordered bcc crystal structure. Average grain sizes of the nanocrystalline phase of the materials with 5, 10 and 15 wt-Mo were 19, 31 and 24 nm respectively and that of the material with 5 wt-Mo was the smallest. The materials with 10 and 15 wt-Mo exhibited brittle behaviour in compression, whereas the material with 5 wt-Mo had a large plastic deformation. The material with 5 wt-Mo had the highest bending strength and the lowest compressive yield strength.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials Lanzhou University of Technology, Lanzhou 730050, China
References (29)
Show source-provided references
1. Westbrook JH · Intermetall. Compd · 2000 · 3 · 182
2. 10.1016/S0025-5408(01)00721-810.1016/S0025-5408(01)00721-8 ↗
3. 10.1016/S0966-9795(02)00045-610.1016/S0966-9795(02)00045-6 ↗
4. Yang Z · J. Iron Steel Res. · 2002 · 14 · 25
5. 10.1557/JMR.1991.177910.1557/JMR.1991.1779 ↗
6. 10.1007/BF0035131710.1007/BF00351317 ↗
7. 10.1016/S0921-5093(98)01039-910.1016/S0921-5093(98)01039-9 ↗
8. 10.1007/BF0036756010.1007/BF00367560 ↗
9. 10.1002/adma.20050043610.1002/adma.200500436 ↗
10. 10.1126/science.282.5392.127510.1126/science.282.5392.1275 ↗
11. Zhu SM · Mater. Sci. Eng. A · 1996 · 16 · 16110.1016/0927-796X(95)00187-5 ↗
12. 10.1016/S0921-5093(01)00962-510.1016/S0921-5093(01)00962-5 ↗
13. 10.1016/S0965-9773(99)00110-510.1016/S0965-9773(99)00110-5 ↗
14. 10.1016/0965-9773(93)90178-E10.1016/0965-9773(93)90178-E ↗
15. 10.1016/0956-7151(94)90015-910.1016/0956-7151(94)90015-9 ↗
16. 10.1016/j.jallcom.2006.08.27910.1016/j.jallcom.2006.08.279 ↗
17. 10.1016/j.stam.2003.11.00410.1016/j.stam.2003.11.004 ↗
18. 10.1016/0921-5093(95)10034-210.1016/0921-5093(95)10034-2 ↗
19. 10.1002/adma.20050168410.1002/adma.200501684 ↗
20. 10.1016/j.msea.2009.12.04310.1016/j.msea.2009.12.043 ↗
21. La PQ · Int. J. Mod. Phys. B · 2009 · 23 · 1575
22. Culity BD: ‘Elements of X-ray diffraction’, 2nd edn; 1978, New York, Addison-Wesley.
23. 10.1016/S0921-5093(02)00585-310.1016/S0921-5093(02)00585-3 ↗
24. 10.1007/s11669-009-9564-410.1007/s11669-009-9564-4 ↗
25. 10.1007/BF0264392310.1007/BF02643923 ↗
26. 10.1179/09506609379032626710.1179/095066093790326267 ↗
27. 10.1038/1948610.1038/19486 ↗
28. 10.1126/science.107104010.1126/science.1071040 ↗
29. Dieter GE: ‘Mechanical metallurgy’; 2006, Beijing, Qinghua University Press.