Study of hot corrosion of alloy 800 using linear polarisation resistance and weight loss measurement
Source abstract
Abstract
A study of the hot corrosion of alloy 800 at 700 and 900°C in 80Na 2 SO 4 +20V 2 O 5 (wt-%) has been carried out. The techniques included linear polarisation resistance (LPR) and weight loss measurement during 10 days of experiments, supported by X-ray measurements and electron microscopy. The degradation of the alloy was discussed in terms of the dissolution of the external Cr 2 O 3 layer with subsequent oxidation and sulfidation of the alloy. Both LPR and weight loss results showed that the corrosion rate is slightly higher at 900 than at 700°C. At the beginning of the experiments, the corrosion rates obtained using the two techniques increase at both temperatures, but decrease later on until they reach steady values. The measured corrosion rates were within the same order of magnitude for both techniques, but the rates obtained with the electrochemical technique were lower than those obtained using weight loss at 700°C, while at 900°C, the opposite was observed. This is because at 700°C the step that controls the corrosion process is the diffusion of species in the alloy or in the melt, whereas at 900°C, the step that controls the reaction is either charge transfer or there is a mixed control. It is evident that electrochemical techniques are powerful tools for monitoring on line hot corrosion processes when the corrosion rate is controlled by an electrochemical reaction, but may induce some errors when the molten salt changes from an ionic to an electronic conductor.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
The Facultad de Ciencias Quimicas e Ingenieria UAEM, Av Universidad 1001, Co Chamilpa, 62210, Cuernavaca, Morelos, Mexico. cecilia.cuevas@eudoramail.com, ggonzalez@uaem.mx
The Instituto de Investigaciones Electricas Apdo Postal 1-475, Co Chamilpa, 62000, Cuernavaca, Morelos, Mexico
CIMAV Miguel de Cervantes 120, Complejo Ind., Chihuahua, Mexico
References (16)
Show source-provided references
1. 10.1021/es60122a00610.1021/es60122a006 ↗
2. PAUL L. D. and SEELEY R. R.: Proc. Conf. Corrosion ‘90 Las Vegas NV USA April 1990 National Association of Corrosion Engineers Paper 267.
3. WONG-MORENO A. MARCHAN-SALGADO R. and MARTINEZ L.: Proc. Conf. Corrosion ‘95 Houston TX USA 1995 National Association of Corrosion Engineers Paper 465.
4. WONG-MORENO A. MUJICA-MARTINEZ Y. and MARTINEZ L.: Proc. Conf. Corrosion ‘94 Houston TX USA 1994 National Association of Corrosion Engineers Paper 185.
5. RATZER-SCHEIBE H. J.: Proc. 4th Int. Symp. On ‘High temperature corrosion’ Les Embiez France May 1996 Centre Francais de l'Anticorrosion.
6. PARDO A. OTERO E. PEREZ F. J. ALVAREZ F. J. and UTRILLA M. V.: Rev. Metal 1993 29 5.
7. 10.1149/1.212937410.1149/1.2129374 ↗
8. SEQUEIRA C. A. C. and HOCKING M. G.: Br. C0170S. J. 1977 12 158.10.1179/bcj.1977.12.3.158 ↗
9. 10.1007/BF0061767210.1007/BF00617672 ↗
10. YUEN B. K. C. ELLIOTT P. E. and DAWSON J. L.: Proc. Conf. On ‘Environmental degradation of high temperature materials’ Douglas Isle of Man UK April 1980 ASME.
11. GAO G. STOTT F. H. DAWSON J. L. and FARREL D. M.: Oxid Met. 1990 33 79.10.1007/BF00665670 ↗
12. FARREL D. M. and STOTT F. H.: Proc Conf. UK Corrosion ‘91 Manchester UK October 1991 Vol. 2; The Institute of Corrosion.
13. ALMERAYA-CALDERON F. MARTINEZ-VILLAFASIE A. and GONZALEZ-RODRIGUEZ J. G.: Br. C0170S. J. 1999 33 288.10.1179/bcj.1998.33.4.288 ↗
14. STERN H., and GEARY M.: J. Electrochem. Soc., 1955, 104, 1154.
15. scuLLY J. R.: in ‘Corrosion tests and standards manual’ (ed. Baboian R.) chapter 9; 1995 Philadelphia PA ASTM.
16. CUEVAS C. and GONZALEZ-RODRIGUEZ J. G.: unpublished work 1999.