journal article·2004-11

TEM study of nanopores and the embrittlement of CVD nickel foam

G. J. C. Carpenter, Z. S. Wronski, M. W. Phaneuf

Materials Science and Technology· Volume 20· Issue 11
Publisher page

Abstract

Ni foam, manufactured by depositing Ni onto polyurethane foam using the carbonyl CVD process, exhibits brittleness which has been correlated with the presence of a high number-density of ‘nanopores’. These nanopores, which were typically less than ∼25 nm in diameter, tended to be associated with sulphur, which is present in the form of H 2 S as a catalyst during the deposition process. The as deposited foam also shows significant hardening, ascribed to the high density of nanopores. This hardening may also help to reduce the ductility compared to well annealed nickel foam. High temperature annealing restores the foam to the high ductility typical of high purity nickel by coarsening the nanopores and removing the sulphur. The failure of the pores to sinter during high temperature annealing indicates the presence of stable gas molecules, the pressure from which balances the surface tension forces that drive sintering.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Copper Interconnects and Reliability · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Materials Technology Laboratories CANMET/NRCan., 568 Booth St., Ottawa, Canada, K1A 0G1.

Fibics Inc., 568 Booth St, Ottawa, Canada K1A 0G1.

References (18)

Show source-provided references
1. WRONSKI z. S.: Int. Mater. Rev. 2001 46 1–49.10.1179/095066001101528394 ↗
2. Patents US 4957543 and 5145716.
3. PAULING L.: ‘General chemistry’ 693; 1988 New York Dover.
4. CARPENTER G. J. C. and WRONSKI z. s.: CANMET Report MTL 96–66. Canada Centre for Minerals and Energy Department of Natural Resources Canada Ottawa 1996 pp 1–17.
5. WEEKS R. W. PATI S. R ASHBY M. F. and BARRAND P.: Acta Met. 1969 17 1403-1410.10.1016/0001-6160(69)90002-9 ↗
6. EDELSON B. I. and BALDWIN M.Jr: Trans. ASM 1962 55 230–250.10.1177/003591576205500355 ↗
7. TABOR D.: ‘The hardness of metals’ Appendix V; 2000 Oxford Oxford University Press.10.1093/oso/9780198507765.001.0001 ↗
8. HILL R.: ‘The mathematical theory of plasticity’ 213; 1967 Oxford Oxford University Press London.
9. HALL E. O.: Proc. Phys. Soc. B 1951 B64 747.10.1088/0370-1301/64/9/303 ↗
10. PETCH N. J.: J. Iron Steel Inst. 1953 173 25.
11. SMITH R. L. and HENDRICKSON A. A.: in ‘Ultra-high purity metals’ 85–114; 1962 Metals Park OH ASM.
12. GREENWOOD G. W. and SPEIGHT M. V.: J. Nucl. Mater. 1963 10 140.10.1016/0022-3115(63)90079-5 ↗
13. TYLER S. K. and GOODHEW P. J.: J. Nucl. Mater. 1980 92 201 — 206.10.1016/0022-3115(80)90103-8 ↗
14. SPEIGHT M. V. and GREENWOOD G. W.: Philos. Mag. 1964 9 683.10.1080/14786436408211880 ↗
15. ROWCLIFFE A. F. CARPENTER G. J. C. MERRICK H. F. and NICHOLSON R. B.: ‘Effects of radiation on structural metals’ Special Technical Publication No 426 ASTM 1967 pp. 165–199.
16. 10.1016/0025-5416(70)90007-810.1016/0025-5416(70)90007-8 ↗
17. 10.1080/0141861870820980310.1080/01418618708209803 ↗
18. 10.1080/0141861870820980410.1080/01418618708209804 ↗