Integrated modelling in materials and process technology
Source abstract
Abstract
Integrated modelling of entire process sequences and the subsequent in-service conditions, and multiphysics modelling of the single process steps are areas that increasingly support optimisation of manufactured parts. In the present paper, three different examples of modelling manufacturing processes from the viewpoint of combined materials and process modelling are presented: solidification of thin walled ductile cast iron, integrated modelling of spray forming and multiphysics modelling of friction stir welding. The fourth example describes integrated modelling applied to a failure analysis of premature rupture of a stellite weld on a P91 valve used in a power plant. For all four examples, the focus is put on modelling results rather than describing the models in detail. Proper comparison with experimental work is given in all examples for model validation as well as relevant references to the original work.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Dilthey U. Dikshev I. Mokrov O. and Pavlyk V.: ‘Mathematical modelling of weld phenomena 7’ (ed.Cerjak H. et al) 1057-1080; 2005 Graz Technical University of Graz.
2. http://www.esi-group.com/SimulationSoftware/Welding_heat_treatment/ (Sysweld software ).
3. Bhadeshia H. K. D. H.: Weld. l 2004 83 (9) 2375-243S.
4. 10.1179/174329305X4836510.1179/174329305X48365 ↗
5. 10.1179/174329306X8598510.1179/174329306X85985 ↗
6. 10.1088/0965-0393/13/1/00610.1088/0965-0393/13/1/006 ↗
7. 10.1063/1.200115310.1063/1.2001153 ↗
8. 10.1088/0965-0393/12/1/S0110.1088/0965-0393/12/1/S01 ↗
9. 10.1088/0965-0393/14/4/01010.1088/0965-0393/14/4/010 ↗
10. Kermanpur A., , Lee P. D., , Tin S., and McLean M.: Mater. Sci Technol, 2005, 21, (4), 437–444.
11. Ch.-A. Gandin Y. Brechet M. Rappaz G. Canova M. Ashby and H. Schercliff : Acta Mater. 2002 50 901–927.10.1016/S1359-6454(01)00376-7 ↗
12. Myhr O. R. Grong O. Fjaer H. G. and Marioara C. D.: Acta Mater. 2004 52 (17) 4997–5008.10.1016/j.actamat.2004.07.002 ↗
13. Lundbäck A. Alberg H. and Henrikson P.: in ‘Mathematical modelling of weld phenomena 7’ (ed.Cerjak H. et al) 683-696; 2005 Graz Technical University of Graz.
14. Robin V. Bernauer G. Akgiin T. and Heubrandtner T.: in ‘Mathematical modelling of weld phenomena 7’ (ed.Cerjak H. et al) 419-434; 2005 Graz Technical University of Graz.
15. 10.1007/BF0326651410.1007/BF03266514 ↗
16. Maguregi J. I. Creo R. S. and Gaiemes J. A.: Proc. 66th World Foundry Congress Tükdolcsad Turkey September 2004 953–962.
17. Larsen P. L.: ‘Iron melt flow in thin walled sections in vertically parted green sand moulds’ PhD thesis Technical University of Denmark Kgs. Lyngby Denmark 2004.
18. Skaland T.: Proc. Conf. Nordiske Stoberidage Tonsberg Norway August 2005 Stobforsk paper no. 5.
19. ‘Ductile iron handbook’ American Foundrymen's Society Inc. Des Plaines IL USA 1992.
20. 10.1016/S1044-5803(98)00012-610.1016/S1044-5803(98)00012-6 ↗
21. Lundbäck E. and Svensson I. L.: in ‘Modeling of casting welding and advanced solidification processes V’ (ed.Rappaz M. et al) 479-484; 1991 Warrendale PA TMS.
22. Catalina A. Guo X. Stefanescu D. M. Chuzhoy L. Pershing L. and Biltgen G. L.: in ‘Modeling of casting welding and advanced solidification processes VIII’ (ed.Thomas B. G. et al) 455-462; 1998 Warrendale PA TMS.
23. Lesoult G. Castro M. and Lacaze J.: Acta Mater. 1998 46 983–995.10.1016/S1359-6454(97)00281-4 ↗
24. Lacaze J. Castro M. and Lesoult G.: Acta Mater. 1998 46 997–1010.10.1016/S1359-6454(97)00282-6 ↗
25. Pedersen K. M. Hattel J. H. and Tiedje N.: Acta Mater. 2006 54 (4) 1199–1209.10.1016/j.actamat.2005.10.052 ↗
26. Pedersen K. M. Hattel J. H. and Tiedje N.: in ‘Modeling of casting welding and advanced solidification processes XI’ (ed.Gardin C. A. .) 545-552; 2006 Warrendale PA TMS.
27. Pedersen K. M.: ‘Solidification and microstructure of thin-walled ductile cast iron’ PhD thesis Technical University of Denmark Kgs. Lyngby Denmark 2005.
28. Zhou Y., , Wu Y., and Lavernia E. J.: Int. J. Non-Equilib. Process., 1997, 10, 95–183.
29. Crowe C. T. Sommerfeld M. and Tsuji Y.: ‘Multiphase flows with droplets and particles’: 1997 Boca Raton FL CRC Press.
30. 10.1088/0965-0393/7/3/30910.1088/0965-0393/7/3/309 ↗
31. 10.1088/0965-0393/7/3/31010.1088/0965-0393/7/3/310 ↗
32. Pedersen T. B. Hattel J. H. Pryds N. H. Pedersen A. S. Buchholz M. and Uhlenwinkel V.: Proc. 1st Int. Conf. on ‘Spray deposition and melt atomization’ Bremen Germany June 2000 Bremen University 803–812.
33. 10.1016/S1359-6462(99)00332-210.1016/S1359-6462(99)00332-2 ↗
34. 10.1137/S003613999528713210.1137/S0036139995287132 ↗
35. 10.1007/s11661-000-0266-010.1007/s11661-000-0266-0 ↗
36. 10.1016/0921-5093(91)90665-A10.1016/0921-5093(91)90665-A ↗
37. 10.1016/j.ijthermalsci.2003.10.00410.1016/j.ijthermalsci.2003.10.004 ↗
38. Pryds N. H. Hattel J. H. Pedersen T. B. and Thorborg J.: Acta Mater. 2002 50 (16) 4075–4091.10.1016/S1359-6454(02)00205-7 ↗
39. Hattel J. H. Pryds N. H. and Pedersen T. B.: Mater. Sci. Eng. A 2004 A383 (1) 184–189.10.1016/j.msea.2004.02.048 ↗
40. Hattel J. H. and Pryds N. H.: Acta Mater. 2004 52 (18) 5275–528810.1016/j.actamat.2004.07.016 ↗
41. 10.1016/j.ijthermalsci.2005.01.00110.1016/j.ijthermalsci.2005.01.001 ↗
42. 10.1016/S0890-6955(03)00022-110.1016/S0890-6955(03)00022-1 ↗
43. 10.1179/13621710322501094310.1179/136217103225010943 ↗
44. 10.1088/0965-0393/12/1/01310.1088/0965-0393/12/1/013 ↗
45. Schmidt H., and Hattel J. H.: Int. J. Offshore Polar Eng., 2004, 14, (4), 296–304.
46. 10.1179/174329305X3607010.1179/174329305X36070 ↗
47. 10.1016/j.jmatprotec.2005.03.01510.1016/j.jmatprotec.2005.03.015 ↗
48. Askari A. Silling S. London B. and Mahoney M.: Conf. Symp. on ‘Friction stir welding and processing’ Indianapolis IN USA November 2001 TMS 43–54.
49. Xu S. and Deng X.: Proc. 4th International Friction Stir Welding Symposium Park City UT USA May 2003 TWI Paper 10B(1).
50. Schmidt H. Dickerson T. and Hattel J.: Acta Mater. 2006 54 1199–1209.10.1016/j.actamat.2005.10.052 ↗
51. Schmidt H. and Hattel J.: Proc. 3rd Symp. on ‘Friction stir welding and processing’ San Francisco CA USA February 2005 TMS Paper 205 (8).
52. Schmidt H. and Hattel J.: Proc. 3rd Symp. on ‘Friction stir welding and processing’ San Francisco CA USA February 2005 TMS Paper 225(B).
53. 10.1016/j.jmatprotec.2005.07.01410.1016/j.jmatprotec.2005.07.014 ↗
54. Schmidt H. and Hattel J.: Proc. 5th International Friction Stir Welding Symposium Metz France September 2004 TWI Paper 09B(2).
55. 10.1088/0965-0393/14/4/01110.1088/0965-0393/14/4/011 ↗
56. Chant I., and Mishra R. S.: Mater. Eng. A, 2003, A359, 290–296.10.1016/S0921-5093(03)00367-8 ↗
57. 10.1361/10549710077034005710.1361/105497100770340057 ↗
58. Hattel J. Thorborg J. Dahl K. V. and Hald J.: Proc. 8th Int. Seminar on ‘Numerical analysis of weldability’ Seggau Graz Austria September 2006 (Keynote).