journal article·2003-01

Comparison of torsion and compression constitutive analyses for elevated temperature deformation of Al–Li–Cu–Mn alloy

G. Avramovic-Cingara, H. J. McQueen, D. D. Perovic

Materials Science and Technology· Volume 19· Issue 1
Publisher page

Abstract

Experimental alloy 2090 (Al – 2.1Li – 2.6Cu – 0.4Mn) was deformed in torsion and compression at temperatures T=300, 400, and 500°C and strain rates ε̇=10–2 to 10 s–1. The torsion and compression results were analysed using equation A(sinh ασ)n=Z=ε̇ exp(QHW/RT), where Z is the Zener – Hollomon parameter. The variation of stress exponent n, Arrhenius slope s, and activation energy QHW were calculated with variation of the stress multiplier a from 0.01 to 0.08 MPa–1. The change of α caused the stress exponent to decrease at a declining rate and Arrhenius slope s to increase linearly, thus causing the activation energy QHW to become stable above α=0.04 MPa–1. The two experimental test techniques gave very similar flow stresses and constitutive constants. At α=0.052 MPa–1 activation energy values showed reasonable consistency with other age hardenable aluminum alloys. The compression tests were also analysed using the power law expression ε̇ exp(Q′HW/RT)=Z=A″σn′.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · High-Velocity Impact and Material Behavior · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Dr G. Avramovic-Cingara(cingara@sympatico.ca or g.avramovic.cingara@utoronto.ca) and Professor D. D. Perovic (perovic@utoronto.ca) are in the Department of Materials Science and Engineering, University of Toronto, 184 College St, Toronto, ON, Canada M5S 3E4. Professor H. J. McQueen is in the Department of Mechanical Engineering, Concordia University, Montreal, QB, Canada H3G 1M8.

References (21)

Show source-provided references
1. MCQUEEN H. J. · Trans · 1970 · 4
2. 10.1179/03071697980327626410.1179/030716979803276264 ↗
3. 10.1179/03071697980327626410.1179/030716979803276264 ↗
4. AVRAMOVIC G. · Prakt. Metall · 1993 · 30 · 2510.1515/pm-1993-300104 ↗
5. AVRAMOVIC G. · Aluminium · 1994 · 70 · 214
6. MCQUEEN H. J. · Microstruct. Sci · 1989 · 17 · 375
7. 10.1016/0956-716X(94)90242-910.1016/0956-716X(94)90242-9 ↗
8. T. SHEPPARD and M. J. TAN: 'Proc. 5th Int. Aluminium lithium alloys Conf,' Williamsburg, VA, (ed. T. H. Sanders and E. A. Starke), 233–260; 1989, Birmingham, MCEP.
9. M. GONZALVES and C. M. SELLARS: ‘Proc. 5th Int. Aluminium lithium alloys Conf,’ Williamsburg, VA, (ed. T. H. Sanders and E. A. Starke), 305–314; 1989, Birmingham, MCEP.
10. I. C. SMITH, G. AVRAMOVIC —CINGARA and H. J. MCQUEEN: ‘Proc. 5th Int. Aluminium lithium alloys Conf,’ Williamsburg, VA, USA (ed. T. H. Sanders and E. A. Starke), 223–232; 1989, Birmingham, MCEP.
11. 10.1007/BF0259544010.1007/BF02595440 ↗
12. KIM N. J. · Acta Metal. Mater · 1993 · 41 · 941 —948
13. MCQUEEN H. J. · Mater. Forum · 1993 · 17 · 1
14. RAYBOULD D. · J. Inst. Met · 1973 · 101 · 65
15. FARAG M. M. · J. Inst. Met · 1973 · 101 · 137 — 145
16. G. AVRAMOVIC—CINGARA and H. J. MCQUEEN: in Int. Conf. on ‘The strength of metals and alloys’, (ICSMA 9), (ed. D. G. Brandon et al), 255–262; 1991, Haifa, Technion.
17. AVRAMOVIC G. · G. PALUMBO and H. J. MCQUEEN: Can. MetalL Q · 1995 · 34 · 265
18. 10.1179/cmq.1993.32.4.37510.1179/cmq.1993.32.4.375 ↗
19. BLUM W. · Z. Metalkd · 1996 · 87 · 341
20. WONG W. A. · Trans TMS—AIME · 1968 · 242 · 2271 —2280
21. MCQUEEN H. J. · Scand. J. Met · 1985 · 14 · 183 — 194