journal article·2003-04

Microstructure development and superplasticity in Inconel 718 sheet

Y. Huang, P. L. Blackwell

Materials Science and Technology· Volume 19· Issue 4
Publisher page

Abstract

Within the range of temperatures and strain rates investigated, mechanical testing identified the optimum forming condition for Inconel 718 sheet as being 965°C with a strain rate of 10 -4 s -1 . A detailed investigation of the microstructural behaviour under these deformation conditions was carried out and is reported here. Typically superplastic deformation would generate an enhanced rate of grain growth. This was not the case with the present material; instead it was found that a slight apparent grain size reduction occurred and there was evidence of substantial dislocation activity. It was concluded that the material was deforming on the borderline between ‘true’ superplasticity and normal slip based deformation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Powder Metallurgy Techniques and Materials · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. NIEH T. G. WADSWORTH J. and SHERBY O. D.: ‘Superplasticity in metals and ceramics’ 58-90; 1997 Cambridge Cambridge University Press.10.1017/CBO9780511525230 ↗
2. SMITH G. D., and FLOWER H. L.: Adv. Mater. Process., 1994, 14, (4), 32–34.
3. SMITH G. D. FLOWER H. L. and LEHOLM R. B.: in ‘Technology transfer in a global community’ (ed. Haggatt J. T. et al.) 28th Int. SAMPE Tech. Conf. Series 611-622; 1996 Covina CA Society for Advancement Materials and Progress Engineering.
4. SMITH G. D. GREGORY S. R. MA Y. LI Y. and LANGDON T. G.: in ‘Superalloys 718 625 706 and various derivatives’ (ed. Loria E. A.) 303-314; 1997 Warrendale PA TMS.10.7449/1997/Superalloys_1997_303_314 ↗
5. SMITH G. D. and YATES D. H.: in ‘Superalloys 718 625 706 and various derivatives’ (ed. Loria E. A.) 355-364; 1994 Warrendale PA TMS.10.7449/1994/Superalloys_1994_355_364 ↗
6. SMITH G. D. YATES D. H. COMLEY P. N. MA Y. and LANGDON T. G.: in ‘Superalloys 1992’ (ed. Antolovich et al) 43-52 1992 Warrendale PA TMS.10.7449/1992/Superalloys_1992_43_52 ↗
7. MAHONEY M. W.: in ‘Superalloy 718–metallurgical and applications’ (ed. Loria E. A.) 391-405; 1989 Warrendale PA TMS.10.7449/1989/Superalloys_1989_391_405 ↗
8. MAHONEY M. W. and CROOKS R.: in ‘Superplasticity in aerospace’ (ed. Heikkenen H. C. et al) 331-344; 1988 Warrendale PA TMS.
9. HUANG Y. STRANGWOOD M. and P. L. BLACKWELL Mater. Sci. Technol. 16 1309–1313.10.1179/026708300101507154 ↗
10. BLACKWELL P. L.PhD thesis University of Birmingham UK 1995 53–59.
11. DIETER G. E.: in ‘Mechanical metallurgy’ 1988 London McGraw-Hill.
12. RICKS R. A. and WINKLER P.-J.: in ‘Proc. 6th Aluminium—Lithium Conf. 1991’ (ed. Peters M. and Winkler P.-J.) 1035-1046; 1992 Oberursel DGM Informationsgesellschaft.
13. 10.1016/0036-9748(76)90147-210.1016/0036-9748(76)90147-2 ↗
14. 10.1016/0956-7151(92)90119-Y10.1016/0956-7151(92)90119-Y ↗
15. 10.1093/biomet/45.1-2.22910.1093/biomet/45.1-2.229 ↗
16. BROOKS J. W.: in ‘Thermo-mechanical processing in theory modelling and practice’ (ed. B. Hutchinson. et al) 52-77; 1996 Stockholm Swedish Society for Materials Technology.
17. 10.1016/0001-6160(81)90155-310.1016/0001-6160(81)90155-3 ↗
18. 10.1007/BF0267403810.1007/BF02674038 ↗
19. 10.1063/1.172260410.1063/1.1722604 ↗
20. LANGDON T. G.: in ‘Superplasticity: 60 years after Pearson’ (ed. Ridley N.) 9-24; 1994 London The Institute of Materials.
21. WILKINSON D. S. CACERES C. H. and WU X.: in 7th Int. Conf. on ‘The strength of metals and alloys’ ICSMA7 (ed. McQueen H. J.) 871-876; 1986 Vol. 2 Pergamon Press.