journal article·2000-05

Laser surface remelting of Cu–Cr–Fe contact material

Geng H.-R., Y. Liu, Chen C.-Z., Sun M.-H., Gao Y.-Q.

Materials Science and Technology· Volume 16· Issue 5
Publisher page

Abstract

Laser surface remelting/resolidifying treatment on a powder metallurgically manufactured Cu–Cr–Fe contact material was studied. Test results showed that a compact remelting/resolidifying layer was obtained with appropriate laser treatment conditions and a suitable surface absorption coating. After such treatment, the Cu–Cr–Fe microstructure was greatly refined and the Cr phase was uniformly dispersed in the Cu rich matrix with fine spherical or near spherical form. Improved compactness and microstructure of the laser remelted Cu–Cr–Fe material yielded increased hardness (by ~80%), wear resistance, and a reduced friction coefficient compared with the base material. The mechanism of laser strengthening is discussed in relation to the microstructural features of the Cu–Cr–Fe material.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (4)

Show source-provided references
1. 10.1063/1.166322210.1063/1.1663222 ↗
2. 10.1109/95.29637410.1109/95.296374 ↗
3. RIEDER W. F. · Packag. Manuf. Technol · 1989 · 12 · 273
4. J.J. WANG: ‘Laser processing principle and application’, 212–214; 1992, Beijing, Metrology Press of China.