journal article·1986-06

High-temperature ductility of AISI 310 austenitic stainless steels

Y. Ohmori, Y. Maehara

Publisher page

Abstract

The effects of deformation temperature and additions of impurity elements on the ductility of solution–treated 25Cr–20Ni steels have been examined at the relatively high strain rate of 0·11 s−1 by means of hot tensile tests. The ductility v. temperature curve can be divided into three regions: region I, 1000–1200 K, where there is a ductility minimum due to M23C6 precipitation on grain boundaries; region II, 1225–1400 K, which exhibits a plateau or a slight trough of ductility with corrugated boundaries as a result of dynamic recrystallization localized near the boundaries; and region III, 1450–1600 K, where recrystallization through the whole specimen leads to ductile fracture with complete necking. It was also confirmed that the grain boundary segregation of Sb and S and the sulphide precipitation on the grain boundaries accelerate intergranular cracking and reduce ductility in the range 1075–1300 K, and that, because sulphide particles melt on boundaries, the zero ductility temperature is markedly lowered by the addition of impurities such as S, P, or Sb.MST/364
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. SERVI I. S. · Trans. AIME · 1951 · 191 · 909
2. BLEAKNEY H. H. · Can. J. Technol., · 1952 · 30 · 340
3. MULLENDORE A. · Trans. AIME · 1954 · 200 · 973
4. GEMMELL G. · Trans. AIME · 1957 · 209 · 417
5. N. J. GRANT: in ‘Fracture’, (ed. B. S. Averbach et al.), 562; 1959, Cambridge, Mass., MIT Press.
6. H. KOBAYASHI, S. YAMAGUCHI, and M. ENDO: in ‘Hot working and forming processes’, (ed. C. M. Sellars and G. J. Davies), 133; 1980, London, The Metals Society.
7. 10.1007/BF0264377610.1007/BF02643776 ↗
8. 10.1179/mst.1985.1.2.11110.1179/mst.1985.1.2.111 ↗
9. 10.2207/qjjws1943.47.15310.2207/qjjws1943.47.153 ↗
10. 10.2207/qjjws1943.49.13610.2207/qjjws1943.49.136 ↗
11. C. ZENER: in ‘Elasticity and anelasticity of metals’, 158; 1948, University of Chicago Press.
12. CHANG H. C. · Trans. AIME · 1956 · 206 · 544
13. McLEAN D. · J. Inst. Met., · 1956 · 85 · 468
14. HORNBOGEN E. · Z. Metallkd., · 1975 · 66 · 511
15. 10.1016/0001-6160(77)90173-010.1016/0001-6160(77)90173-0 ↗
16. 10.1179/msc.1978.12.11.53210.1179/msc.1978.12.11.532 ↗
17. 10.1016/0001-6160(79)90051-810.1016/0001-6160(79)90051-8 ↗
18. SUZUKI H. G. · Tetsu-to-Hagané (J. Iron Steel Inst. Jpn) · 1979 · 65 · 203810.2355/tetsutohagane1955.65.14_2038 ↗
19. 10.2355/isijinternational1966.22.18110.2355/isijinternational1966.22.181 ↗
20. 10.1179/03063458379042078110.1179/030634583790420781 ↗
21. 10.1016/0025-5416(84)90272-610.1016/0025-5416(84)90272-6 ↗
22. 10.2320/matertrans1960.25.16010.2320/matertrans1960.25.160 ↗
23. 10.1080/1478643590824326410.1080/14786435908243264 ↗
24. 10.1016/0036-9748(67)90021-X10.1016/0036-9748(67)90021-X ↗
25. 10.1179/03063458079042630010.1179/030634580790426300 ↗
26. 10.1179/03063458079044116910.1179/030634580790441169 ↗
27. 10.1016/0001-6160(81)90023-710.1016/0001-6160(81)90023-7 ↗
28. PERRYMAN E. C. W. · I. Inst. Met., · 1954 · 83 · 369
29. CHANG H. C. · Trans. AIME · 1952 · 194 · 619
30. 10.1179/imr.1976.21.1.110.1179/imr.1976.21.1.1 ↗
31. LOZINSKII M. G. · Russ. Metall., · 1967 · 5 · 65