journal article·1993-11

Criteria for prediction of flow instabilities and microstructural manifestations during warm working of AISI 304L stainless steel

S. Venugopal, S. L. Mannan, Y. V. R. K. Prasad

Materials Science and Technology· Volume 9· Issue 11
Publisher page

Abstract

The deformation characteristics of 304L stainless steel in compression in the temperature range 20–700°C and strain rate range 0·001–100 s−1 have been studied with the aim of characterising the .flow instabilities occurring in the microstructure. At higher temperatures and strain rates the stainless steel exhibits flow localisation, whereas at temperatures below 500°C and strain rates lower than 0·1 s−1 the flow instabilities are due to dynamic strain aging. Strain induced martensite formation is responsible for the flow instabilities at room temperature and low strain rates (0·01 s−1). In view of the occurrence of these instabilities, cold working is preferable to warm working to achieve dimensional tolerance and reproducible properties in the product. Among the different criteria tested to explain the occurrence of instabilities, the continuum criterion, developed on the basis of the principles of maximum rate of entropy production and separability of the dissipation function, predicts accurately all the above instability features.MST/1835
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. 10.1179/imr.1982.27.1.110.1179/imr.1982.27.1.1 ↗
2. SUNTER B. J. · J. Aust. Inst. Met., · 1972 · 17 · 91
3. K. A. REYNOLDS: in ‘Deformation under hot working conditions’, (ed. C. M. Sellars and W. J. McG. Tegart), 107; 1968, London, The Iron and Steel Institute.
4. 10.1007/BF0264442710.1007/BF02644427 ↗
5. 10.1007/BF0266240310.1007/BF02662403 ↗
6. M. G. COCKROFT: in ‘Ductility’, 199; 1968, Metals Park, OH, ASM.
7. V. WEISS: in Proc. Seminar on ‘The inhomogenity of plastic deformation’, 135; 1973, Metals Park, OH, ASM.
8. A. S. ARGON: in Proc. Seminar on ‘The inhomogeneity of plastic deformation’, 161; 1973, Metals Park, OH, ASM.
9. J. D. BAIRD: in Proc. Seminar on ‘The inhomogeneity of plastic deformation’, 191; 1973, Metals Park, OH, ASM.
10. F. N. RHINES: in Proc. Seminar on ‘The inhomogeneity of plastic deformation’, 251; 1973, Metals Park, OH, ASM.
11. 10.1007/BF0264375310.1007/BF02643753 ↗
12. S. L. SEMIATIN and J. J. JONAS: ‘Formability and workability of metals: plastic instability and flow localization’; 1984, Metals Park, OH, ASM.
13. M. E. BACKMAN and S. A. FINNEGAN: ‘Metallurgical effects at high strain rates’, 531; 1976, New York, Plenum Press.
14. H. W. WAGENER: ‘Compendium on special topics on metal forming machine tools’; 1983, Madras, India, Indian Institute of Technology.
15. 10.1016/0956-716X(92)90372-L10.1016/0956-716X(92)90372-L ↗
16. 10.1007/BF0264551010.1007/BF02645510 ↗
17. 10.1007/BF0283399610.1007/BF02833996 ↗
18. 10.1179/mst.1993.9.3.24610.1179/mst.1993.9.3.246 ↗
19. H. L. GEGEL, J. C. MALAS, S. M. DORAIVELIJ, and V. A. SHENDE: ‘Metals handbook’, 9 edn, Vol. 14, 417; 1987, Metals Park, OH, ASM.
20. H. ZIEGLER: ‘Progress in solid mechanics’, Vol. 4, (ed. I. N. Sneddon and R. Hill, 93; 1963, Amsterdam, North-Holland Publishing.
21. 10.1007/BF0265899210.1007/BF02658992 ↗
22. SANKARA RAO K. BHANU · Trans. Indian Inst. Met., · 1991 · 44 · 255
23. 10.1016/0924-0136(92)90349-W10.1016/0924-0136(92)90349-W ↗
24. 10.1007/BF0266490210.1007/BF02664902 ↗
25. J. M. ALEXANDER: in ‘Modelling of hot deformation of steels’, (ed. J. G. Lenard), 101; 1984, Berlin, Springer-Verlag.
26. VENUGOPAL S. · Metall. Trans., · 1993 · 23 · 309310.1007/BF02646128 ↗
27. MANNAN S. L. · Trans. Indian Inst. Met., · 1991 · 44 · 355
28. JENKINS C. F. · Trans. AIME · 1969 · 245 · 2149
29. McCORMICK P. G. · Trans. Indian Inst. Met., · 1986 · 39 · 98
30. BAIRD J. D. · Metall. Rev., · 1971 · 16 · 510.1179/095066071790137928 ↗
31. 10.1016/0025-5416(66)90032-210.1016/0025-5416(66)90032-2 ↗
32. DECERF J. · Z. Metallkd., · 1974 · 65 · 215
33. 10.1007/BF0274399310.1007/BF02743993 ↗
34. 10.1080/1478643630821116010.1080/14786436308211160 ↗
35. JENKINS C. E · J. Iron Steel Inst., · 1968 · 206 · 1267
36. 10.1016/0956-7151(92)90406-510.1016/0956-7151(92)90406-5 ↗
37. 10.1016/0022-5088(72)90173-710.1016/0022-5088(72)90173-7 ↗
38. 10.1007/BF0264661310.1007/BF02646613 ↗
39. 10.1080/1478643620820185610.1080/14786436208201856 ↗
40. 10.1115/1.326119010.1115/1.3261190 ↗
41. ANGEL T. · J. Iron Steel Inst., · 1954 · 177 · 165
42. 10.1007/BF0264442810.1007/BF02644428 ↗