Toughness and fatigue behaviour of eutectic and hypereutectic Al–Si–Cu–Mg alloys produced through lost foam and squeeze casting
Source abstract
Abstract
The strength and toughness of four high silicon content Al–Si–Mg–Cu alloys have been studied at room temperature (RT), 200°C and 300°C. The fatigue behaviour has also been investigated. The alloys were produced using two very different processing routes: lost foam and squeeze casting. In the tensile tests, the ductility was low for alloys produced via both routes irrespective of the testing temperature. The strength was similar at RT and 200°C, but at 300°C it fell abruptly. The toughness followed the same trend with testing temperature. Direct observation of fatigue cracks revealed that the brittle silicon and intermetallic particles broke ahead of the crack tip; the fatigue crack advanced by linking the main crack with cracks formed ahead of it. The T6 thermal treatment improved fatigue resistance in the squeeze cast material, especially at high D K values.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. COLE G. · Steel World · 1997 · 2 · 75
2. 10.1016/S0043-1648(98)00336-610.1016/S0043-1648(98)00336-6 ↗
3. A. KAYE and A. STREET: 'Die casting metallurgy', 32; 1982, London, Butterworths.10.1016/B978-0-408-10717-4.50020-1 ↗
4. 10.1007/BF0266965010.1007/BF02669650 ↗
5. 10.1016/S0924-0136(00)00793-710.1016/S0924-0136(00)00793-7 ↗
6. JALEEL T. K. A. · Aluminium · 1984 · 60 · 493
7. 10.1016/S1359-6462(02)00020-910.1016/S1359-6462(02)00020-9 ↗
8. 10.1016/0956-716X(91)90285-910.1016/0956-716X(91)90285-9 ↗
9. WILLIAM Y. W. · Metall. Trans. A · 1995 · 26 · 123510.1007/BF02670618 ↗
10. 10.1007/BF0054393110.1007/BF00543931 ↗
11. 10.1007/BF0264708310.1007/BF02647083 ↗
12. 10.1007/BF0266109410.1007/BF02661094 ↗
13. HAHAN G. H. · Metall. Trans. A · 1992 · 154 · 35
14. 10.1016/0956-716X(93)90319-N10.1016/0956-716X(93)90319-N ↗
15. 10.1016/S0036-9748(88)80152-210.1016/S0036-9748(88)80152-2 ↗
16. 10.1016/S0261-3069(99)00072-210.1016/S0261-3069(99)00072-2 ↗
17. 10.1016/0956-716X(95)00146-M10.1016/0956-716X(95)00146-M ↗
18. 10.1016/S0924-0136(99)00291-510.1016/S0924-0136(99)00291-5 ↗
19. 10.1016/0956-7151(94)90162-710.1016/0956-7151(94)90162-7 ↗
20. 10.1179/mst.1996.12.7.58610.1179/mst.1996.12.7.586 ↗
21. 10.4028/www.scientific.net/MSF.331-337.98310.4028/www.scientific.net/MSF.331-337.983 ↗
22. 10.1007/s11661-000-0272-210.1007/s11661-000-0272-2 ↗
23. 10.3139/146.02020810.3139/146.020208 ↗
24. 10.1007/BF0266852510.1007/BF02668525 ↗
25. B. DUBOST, J. BOUVAIST and M. REBOUL: Proc. Int. Conf. on 'Aluminum alloys', Charlottsville, VA, 1986, vol. II, 1109–1123.
26. L. F. MONDOLFO: 'Aluminum alloys: structure and properties', 768; 1976, London, Butterworths.10.1016/B978-0-408-70932-3.50008-5 ↗
27. 10.1179/mst.1993.9.10.85310.1179/mst.1993.9.10.853 ↗
28. VALER GO J. · Scripta MetalL · 1996 · 34 · 483
29. 10.1016/S0924-0136(97)00409-310.1016/S0924-0136(97)00409-3 ↗
30. 10.1016/0001-6160(89)90039-410.1016/0001-6160(89)90039-4 ↗
31. 10.1016/0921-5093(92)90360-D10.1016/0921-5093(92)90360-D ↗
32. 10.1016/0001-6160(89)90037-010.1016/0001-6160(89)90037-0 ↗
33. 10.1007/BF0036342110.1007/BF00363421 ↗
34. 10.1007/BF0035214710.1007/BF00352147 ↗
35. 10.1016/0013-7944(94)90230-510.1016/0013-7944(94)90230-5 ↗
36. 10.1179/mst.1989.5.1.110.1179/mst.1989.5.1.1 ↗
37. 10.1016/0956-716X(94)90454-510.1016/0956-716X(94)90454-5 ↗
38. 10.1007/BF0267125010.1007/BF02671250 ↗
39. VALER GOÑI J. · Key Eng. Mater · 1997 · 127
40. HODA H. · Alum. Trans · 1999 · 1 · 109
41. ROEBUCK B. · Mater. Sci Eng · 1990 · 6 · 1199
42. 10.1007/BF0054444810.1007/BF00544448 ↗
43. 10.1179/mst.1994.10.7.65910.1179/mst.1994.10.7.659 ↗
44. 10.1007/BF0001963110.1007/BF00019631 ↗
45. J. VALER GOÑI: 'Estudio de la microestructura y propiedades mecdnicas de nuevos composites basados en aleaciones hipereutécticas de aluminio-silicio', PhD thesis, Univ. of Navarra, Spain, 1995.
46. A. HERRERA and V. KONDIC: Proc. Conf. on 'Solidification and casting of metals', London, UK, 1977, The Metals Society, 460.
47. 10.1016/0924-0136(93)90204-J10.1016/0924-0136(93)90204-J ↗
48. 10.1007/BF0266944210.1007/BF02669442 ↗
49. 10.1016/0921-5093(91)90657-910.1016/0921-5093(91)90657-9 ↗
50. 10.1179/mst.1991.7.7.59610.1179/mst.1991.7.7.596 ↗
51. 10.1016/S0142-1123(01)00006-810.1016/S0142-1123(01)00006-8 ↗
52. 10.1007/BF0265680610.1007/BF02656806 ↗
53. 10.1111/j.1460-2695.1992.tb00011.x10.1111/j.1460-2695.1992.tb00011.x ↗
54. 10.1007/BF0264760610.1007/BF02647606 ↗
55. 10.1179/msc.1979.13.6.34110.1179/msc.1979.13.6.341 ↗