journal article·2005-09

Investigation of microstructure and mechanical properties of steel fibre–cast iron composites

A. Akdemir, H. Arikan, R. Kuş

Materials Science and Technology· Volume 21· Issue 9
Publisher page

Abstract

The aim of the present experimental study was to investigate improvement of the toughness and strength of grey cast iron by reinforcing with steel fibres. The carbon content of the steel fibres was chosen to be sufficiently low that graphite flakes behaving as cracks were removed by carbon diffusion from the cast iron to the steel fibres during the solidification and cooling stages. To produce a graphite free matrix, steel fibres with optimum carbon content were used and the reinforced composite structure was cast under controlled casting conditions and fibre orientation. Three point bend test specimens were manufactured from steel fibre reinforced and unreinforced flake graphite cast iron and then normalising heat treatments were applied to the specimens at temperatures of 800 and 850°C. The fracture toughness and strength properties of the steel fibre reinforced material were found to be much better than those of unreinforced cast iron. The microstructures of the composite at the fibre–matrix transition zone were examined.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. 10.1179/02670830322500436910.1179/026708303225004369 ↗
2. 10.1179/02670830322500183010.1179/026708303225001830 ↗
3. Arpón R. · Mater. Set Technol · 2003 · 19 · 1219
4. 10.1016/S1359-835X(00)00177-910.1016/S1359-835X(00)00177-9 ↗
5. 10.1016/S0924-0136(02)00098-510.1016/S0924-0136(02)00098-5 ↗
6. 10.1016/S0266-3538(01)00130-010.1016/S0266-3538(01)00130-0 ↗
7. 10.1016/S0254-0584(01)00371-610.1016/S0254-0584(01)00371-6 ↗
8. 10.1115/1.360120610.1115/1.3601206 ↗
9. H. Tada, P. C. Paris and G. R. Irwin: ‘The stress analysis of cracks handbook’; 1973, Hellertown, PA, Del Research Corp.