Temperature dependence of low cycle fatigue of 316(N) weld metals and 316L(N)/316(N) weld joints
Source abstract
Abstract
The low cycle fatigue behaviour of 316(N) weld metals and 316L(N)/316(N) weld joints have been investigated in the temperature range of 300–873 K, at a strain amplitude of ±0·6% and a strain rate 3 6 10–3 s–1, to study the influence of dynamic strain aging (DSA). The 316(N) weld metal exhibited better fatigue life than the weld joint, though the weld metal has shown higher cyclic stress response and higher plastic strain accumulation than the weld joint. Significant features observed in the temperature regime of 300–873 K include the maximum in fatigue life at 573 K and DSA in the range of 673–873 K. Occurrence of DSA has been manifested through drastic reduction in fatigue life in the range of 673–873 K, associated with anomalous stress response. Dominant DSA effects have been observed at about 773 K in the weld joint and at 823 K in the weld metal. However, the effect of DSA is found to be nominal beyond 823 K where the reduction in fatigue life is attributed to the combined effects of oxidation and DSA. Secondary crack density measurements (in the range of 300–873 K) in the weld joint specimens revealed the severity of the heat affected zone (HAZ) in inducing fatigue damage. Parameters have been identified to determine the temperature corresponding to dominant DSA effects.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. 10.1016/0142-1123(91)90482-E10.1016/0142-1123(91)90482-E ↗
2. 10.1016/j.ijfatigue.2003.12.00210.1016/j.ijfatigue.2003.12.002 ↗
3. 10.1016/0022-3115(88)90388-110.1016/0022-3115(88)90388-1 ↗
4. Bhanu Sankara K. · Trans. Indian Inst. Met · 1991 · 44 · S255
5. 10.1016/0921-5093(90)90082-E10.1016/0921-5093(90)90082-E ↗
6. 10.1007/BF0267061610.1007/BF02670616 ↗
7. Bhanu Sankara Rao K. · Metall. Trans. A · 1993 · 24 · 91310.1007/BF02656512 ↗
8. 10.1016/j.ijfatigue.2004.05.00310.1016/j.ijfatigue.2004.05.003 ↗
9. Pecker D., and Bernstein I. M. ‘Handbook of Stainless Steels’; 1977, New York, McGraw-Hill.
10. Oh Y. J. · J. Korean Inst. Met. Mater · 1997 · 35 · 942
11. Wahlberg G., Rolander U., and Andren H. O.: Proc. Int. Conf. on ‘High nitrogen steels’, Lille, France, May 1988, The Institute of Metals, London, 163.
12. 10.1016/S0022-3115(01)00709-710.1016/S0022-3115(01)00709-7 ↗
13. 10.1016/S0022-3115(97)00360-710.1016/S0022-3115(97)00360-7 ↗
14. 10.1007/BF0264985610.1007/BF02649856 ↗
15. Cottrell A. H. ‘Dislocations and plastic flow in crystals’; 1953, London, Oxford University.
16. 10.1016/0001-6160(58)90101-910.1016/0001-6160(58)90101-9 ↗
17. 10.1016/S1359-6462(97)00282-010.1016/S1359-6462(97)00282-0 ↗
18. 10.1016/j.jnucmat.2004.12.01210.1016/j.jnucmat.2004.12.012 ↗
19. Weisse M. · Metall · 1993 · 3
20. Srinivasan V. S. · Proc. of International Symposium on ‘Materials aging and life management’, IGCAR-Kalpakkam, INDIA, October 2000, Allied publishers · 71
21. 10.1016/0025-5416(83)90107-610.1016/0025-5416(83)90107-6 ↗
22. Samuel K. G. · Metall · 1988 · 36 · 2323
23. Kanazawa K., Yamaguchi K., and Nishijima S.: in ‘Low cycle fatigue’, (ed. Solomon H. D. et al), 519; 1988, ASTM STP 942.10.1520/STP24503S ↗
24. Kannan R. · Trans. Indian Inst. Metals · 2005 · 58 · 317
25. Lecroisey F., and Pineau A.: Metall Trans. 1972, 3, 387–396.10.1007/BF02642042 ↗
26. 10.1016/0025-5416(77)90176-810.1016/0025-5416(77)90176-8 ↗
27. Kesten M. · Mater. Set Eng. A · 1992 · 159 · 3510.1016/0921-5093(92)90396-I ↗
28. Botshekan M., Degallaix S., and Desplanques Y.: Mater. Set Eng. A, 1997, A234-236,463–466.10.1016/S0921-5093(97)00299-2 ↗
29. Krupp U., Christ H. J., Lezuo P., Maier H. J., and Teteruk R. G.: Mater. Sci. Eng. A, 2001, A319-321,527–530.10.1016/S0921-5093(01)01087-5 ↗
30. 10.1016/j.msea.2006.04.07710.1016/j.msea.2006.04.077 ↗
31. Bhanu Sankara Rao K., Valsan M., Mannan S. L., and Rodriguez P.: in ‘Advances in material research’, Vol. 2, 1323; 1989, Houston, Texas, USA, ICF-7.
32. Valsan M. · Metall Trans. A · 1995 · 25 · 15910.1007/BF02646684 ↗
33. Bressers J.: in ‘High temperature alloys, their exploitable potential’, (ed., J. B. Marriott et al), 385-410; 1987, Amsterdam, Elsevier Applied Science.10.1007/978-94-009-1347-9_39 ↗
34. Driver J. H., Gorlier C., Belrami C., Violan R., and Amzallag C.: in ‘Low cycle fatigue’, 438-455, (ed.Solomon H. D. et al), 1988; Warrendale, PA, ASTM STP 942.10.1520/STP24496S ↗
35. Mo M. · Weld 1 · 1967 · 241
36. 10.1016/0921-5093(89)90090-710.1016/0921-5093(89)90090-7 ↗