Aluminium powder particles produced by SAMD technique: Typical characteristics and correlations between processing conditions and powder size
Source abstract
Abstract
The present paper consists of two parts. In the first part the principles of a new method of metal powder production, termed ‘solid assisted melt disintegration (SAMD)’ are discussed and the typical characteristics of the produced powder are outlined. In the second part the effects of some processing parameters on the size distribution and mean diameter of the powder are reported. The SAMD method involves mixing solid particles (i.e. alumina) with the liquid aluminium alloy aided by mechanical agitation. The shear force induced by the impeller is transferred to the metal via the non-wetting solid medium and results in melt disintegration. The resulting mixture of aluminium droplets and alumina particles are subsequently cooled in air and screened through 300 μm sieve to separate alumina from solidified aluminium powder particles. The SAMD technique has demonstrated the capability to produce a wide particle size distribution. The small sized particles (i.e. <53 μm) exhibited irregular shapes, but larger ones were mostly spherical. These powder particles were dense (pore free) without attached satellite particles and exhibited a relatively coarse microstructure. The processing parameters investigated include the size of Al2O3 particles, Al2O3/Al weight ratio, stirring speed and stirring time. It was concluded that there exists an optimum value for each of the aforementioned parameters corresponding to a minimum in the mean particle size.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Quasicrystal Structures and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Williams B. · MPR · 1988 · 43 · 405
2. Lawley A. · Int. J. Powder Met. Technol · 1977 · 13 · 169
3. Zhao Y. Y. · Design · 2006 · 27 · 745
4. 10.1179/pom.1990.33.1.5310.1179/pom.1990.33.1.53 ↗
5. Akhlaghi F., and Pelaseyyed S. A.: Proc. 6th Conf. on ‘Metallurgical engineering’, Tehran, Iran, October 2002, Iran University of Science & Technology,379–388.
6. Akhlaghi F., and Esfandiari H.: Proc. 16th Seminar on ‘Metal casting’, Tehran, Iran, May 2004, Iran University of Science & Technology,183–193.
7. 10.1016/S0921-5093(04)00876-710.1016/S0921-5093(04)00876-7 ↗
8. Akhlaghi F. ‘Production and characterisation of aluminium powders by using intermediate ceramic particles’, Report 615/3/ 807, Tehran University, Tehran, Iran, 2002.
9. 10.1016/0001-6160(88)90248-910.1016/0001-6160(88)90248-9 ↗
10. 10.1016/0921-5093(91)90542-U10.1016/0921-5093(91)90542-U ↗
11. 10.1016/0955-2219(92)90016-710.1016/0955-2219(92)90016-7 ↗
12. 10.1016/1359-6454(95)00235-910.1016/1359-6454(95)00235-9 ↗
13. 10.1016/S0921-5093(98)00759-X10.1016/S0921-5093(98)00759-X ↗
14. 10.1016/S0921-5093(01)01305-310.1016/S0921-5093(01)01305-3 ↗
15. 10.1016/S1359-835X(02)00161-610.1016/S1359-835X(02)00161-6 ↗
16. 10.1016/S0167-577X(03)00006-510.1016/S0167-577X(03)00006-5 ↗
17. Unal A. · B · 1989 · 20 · 61
18. Halada K., Suga H., and Muramatsu Y.: Proc. Int. Conf. on ‘Powder metallurgy (PM into the 1990s)’,Vol. 1, 193-199; 1990, London, The Institute of Metals.
19. Unal A.: in ‘Aluminium technology ‘86’, (ed. Sheppard T.), 673–678, 1986, London, The Institute of Metals.
20. Vanstone R. H., Rizzo F. J., and Radavich J. F.: Proc. 2nd Int. Conf. on ‘Rapid solidification processing’, (ed.Mehrabian R. et al), Reston, VA, USA, March 1980,260–272.
21. Pandey A. B. · Trans. Ind. Inst. Met · 1988 · 41 · 363
22. Unal A. · Int. J. Powder Metall · 1990 · 26 · 11
23. 10.1179/pom.1972.15.29.00610.1179/pom.1972.15.29.006 ↗
24. 10.1179/pom.1986.29.1.2010.1179/pom.1986.29.1.20 ↗
25. 10.1179/mst.1987.3.12.102910.1179/mst.1987.3.12.1029 ↗
26. Akhlaghi F., Beech J., and Jones H.: Proc. 1st Int. Conf. on ‘Spray forming’, Swansea, UK, September 1990, Osprey Metals, 6.01-6.12.
27. 10.1016/j.matchar.2004.01.00610.1016/j.matchar.2004.01.006 ↗
28. Akhlaghi F. · 1990
29. Jones H. ‘Rapid solidification of metals and alloys’, Monograph No. 8, The institution of Metallurgists, London, UK, 1982.
30. 10.1179/imr.1992.37.1.110.1179/imr.1992.37.1.1 ↗
31. Akhlaghi F. · Iran. J. Mater. Sci. Eng · 2004 · 1 · 13
32. Akhlaghi F., and Zandi H.: Proc. Int. Conf. on ‘Spray deposition and melt atomization’, Bremen, Germany, June 2000, University of Bremen,263–272.