Microstructural characteristics of gas tungsten arc synthesised Fe-Cr-Si-C coating
Source abstract
Abstract
The gas tungsten arc (GTA) method was used to synthesise Fe-Cr-Si-C alloy coatings, and processing effects on the coating were investigated experimentally. Coatings were developed on an AISI type 1040 steel substrate. Four different regions were obtained in the surface coating; and in these regions either a hypoeutectic or a hypereutectic microstructure was found. The hypoeutectic microstructure consisted of primary dendrites of austenite (γ) phase and eutectic M7C3 (M=Cr,Fe) carbides. On the other hand, the hypereutectic microstructure consisted of M7C3 primary carbides and eutectic. A hypoeutectic or hypereutectic microstructure was determined by the combination of particularly carbon concentration, solidification rate, and extent of substrate melting. The higher hardness of the hypereutectic microstructure is attributed especially to the formation of M7C3 primary carbides. The lower hardness of the hypoeutectic microstructure is related to three effective parameters: first, the presence of γ phase in the primary dendrites; second, excessive dilution from the base material; and third, relatively low concentrations of chromium and carbon.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. K. H. ZUM GAHR: ‘Microstructure and wear of materials’; 1987, Amsterdam, Elsevier.
2. II G. LAIRD · Metall. Trans A · 1993 · 22 · 98110.1007/BF02656520 ↗
3. 10.1007/BF0267068410.1007/BF02670684 ↗
4. BLAKE A. G. · SPIE · 1988 · 957 · 56 — 65
5. DOGAN Ö N. · Metall. Mater. Trans A · 1997 · 28 · 1315 — 132810.1007/s11661-997-0267-3 ↗
6. MINEMURA T. · Metall. Trans. A · 1990 · 11 · 671 — 673
7. ElHOLZER E. · Proc. Laser Inst. Am · 1984 · 44 · 159
8. 10.1115/1.290329910.1115/1.2903299 ↗
9. 10.1007/BF0264660110.1007/BF02646601 ↗
10. Kuo K. · J. Iron Steel Inst · 1957 · 185 · 297
11. GRIFFING N. R. · Trans. AIME · 1962 · 224 · 148 — 159
12. DODD J. · AFS Int. Cast Met. J · 1980 · 3 · 37 — 46
13. II G. LAIRD · Metall. Trans. A · 1991 · 22 · 170910.1007/BF02646494 ↗
14. 10.1007/BF0072326810.1007/BF00723268 ↗
15. 10.1179/03071697980327622810.1179/030716979803276228 ↗
16. JACSON R. S. · J. Iron Steel Inst · 1970 · 208 · 163 — 167
17. 10.1179/imtr.1984.29.1.29910.1179/imtr.1984.29.1.299 ↗
18. J. E. FLINN: ‘Rapid solidification technology for reduced consumption of strategic materials’, 42–64; 1985, Park Ridge, NJ, Noyes Publications.
19. B. D. CULLITY: ‘Elements of X-ray diffraction’, 324–349; 1978, Reading, UK, Addison-Wesley.
20. DURMIN J. · J. Iron Steel Inst · 1968 · 206 · 60— 67
21. 10.1179/msc.1982.16.5.26810.1179/msc.1982.16.5.268 ↗
22. MINEMURA T. · Metall. Trans. A · 1980 · 11 · 671 — 67310.1007/BF02670705 ↗
23. A. FRENK and W. KURZ: in ‘Advanced techniques for surface engineering’, (ed. W. Gissler and H. A. Jehn); 1992, Dordrecht, Kluwer.
24. 10.1115/1.290419810.1115/1.2904198 ↗
25. 10.1016/0025-5416(76)90177-410.1016/0025-5416(76)90177-4 ↗
26. 10.1007/BF0266301110.1007/BF02663011 ↗
27. MATSUBARA Y. · AFS Trans · 1981 · 89 · 183
28. OGI K. · AFS Trans · 1981 · 89 · 197
29. POWELL G. L. F. · Met. Forum · 1980 · 3 · 37
30. 10.1016/0956-716X(95)93214-O10.1016/0956-716X(95)93214-O ↗
31. 10.1007/BF0266301110.1007/BF02663011 ↗