journal article·2006-09

MicroCT (microtomography) quantification of microstructure related to macroscopic behaviour: Part 1 – Fatigue crack closure measured in situ in AA 2090 compact tension samples

K. I. Ignatiev, G. R. Davis, J. C. Elliott, S. R. Stock

Materials Science and Technology· Volume 22· Issue 9
Publisher page

Abstract

Microcomputed tomography (microCT) quantified crack opening in situ in a small compact tension specimen (AA 2090 T8E41) as a function of 3D position and of applied load. The same specimen was observed twice at two crack lengths. Some crack face areas were dominated by large asperities, while others were relatively flat. Large openings followed the sides of large asperities, with small openings elsewhere. The crack path and pattern of openings are discussed in terms of the variation in mesotexture. Before and after the crack extension, the pattern of open (and closed) voxels did not appear to change, suggesting that contact at a point near the crack tip will continue at the same portion of the fatigue cycle after the tip has receded. Testing parameters and macroscopic closure measurements link the present microCT measurements to studies in the literature.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Non-Destructive Testing Techniques · Fatigue and fracture mechanics · Ultrasonics and Acoustic Wave Propagation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Voxel is the abbreviation for volume element, and the size of a voxel is described in terms of the lengths of its three orthogonal edges. When these edges are equal, the voxel is ‘isotropic’, and only one dimension is required to completely define the size of an isotropic voxel.
2. Breunig T. M. · 1992
3. Breunig T. M., Stock S. R., Antolovich S. D., Kinney J. H., Massey W. N., and Nichols M. C. ‘Fracture mechanics: twenty-second symposium’, ASTM STP 1131,Vol. 1, 749-761; 1992, Philadelphia, PA, ASTM.
4. Breunig T. M. · Mater. Eval · 1993 · 51 · 596
5. Guvenilir A. · 1995
6. 10.1016/S1359-6454(96)00311-410.1016/S1359-6454(96)00311-4 ↗
7. 10.1046/j.1460-2695.1998.00062.x10.1046/j.1460-2695.1998.00062.x ↗
8. 10.1098/rsta.1999.046410.1098/rsta.1999.0464 ↗
9. Guvenilir A., Stock S. R., Barker M. D., and Betz R. A.: Proc. 4th Int. Conf. on ‘Aluminum alloys’,Vol. 2, 413-419; 1994, Atlanta, GE, Georgia Institute of Technology.
10. Morano R. N. · 1998
11. 10.1557/PROC-591-3110.1557/PROC-591-31 ↗
12. Morano R., Stock S. R., Davis G. R., and Elliott J. C.: Proc. 12th Int. Conf. on ‘Textures of metals’, (ed.Szpunar J. A.), Vol. 2, 1106-1111; 1999, Ottawa, National Research Council of Canada.
13. 10.1016/S1359-6454(98)00118-910.1016/S1359-6454(98)00118-9 ↗
14. Haase J. D., Guvenilir A., Witt J. R., Lamm M. A., and Stock S. R. ‘Mixed-mode crack behavior’, ASTM STP 1359, 160-173; 1999, Philadelphia, PA, ASTM.10.1520/STP14249S ↗
15. Haase J. D. ‘Microbeam diffraction mapping of microtexture in Al-Li 2090 T8E41’, Master thesis, Georgia Institute of Technology, Atlanta, GE, 1998.
16. Rek Z. U. · Adv. X-ray Anal · 2000 · 44 · 56
17. McClintock F. A., and Argon A. S. ‘Mechanical behavior of materials’; 1966, Reading, MA Addison-Wesley.
18. Bonse U. · J. Mater. Sc · 4076
19. 10.1080/147864303100011575410.1080/1478643031000115754 ↗
20. 10.1016/j.actamat.2003.11.01410.1016/j.actamat.2003.11.014 ↗
21. 10.1016/S1359-6454(02)00320-810.1016/S1359-6454(02)00320-8 ↗
22. 10.1179/09506609910152826110.1179/095066099101528261 ↗
23. Davis G. R. · J. Phys · 2003 · 104 · 131
24. Kak A. C., and Slaney M. ‘Principles of computerized tomographic imaging’, 177-201; 2001, Philadelphia, PA, Society of Industrial and Applied Mathematics.10.1137/1.9780898719277 ↗
25. Breunig T. M., Elliott J. C., Stock S. R., Anderson P., Davis G. R., and Guvenilir A. ‘X-ray microscopy III’, 465–468; 1992, New York, Springer-Verlag.10.1007/978-3-540-46887-5_106 ↗
26. 10.1016/0010-4361(93)90165-510.1016/0010-4361(93)90165-5 ↗
27. Yoder G. R., Pao P. S., Imam M. A., and Cooley L. A.: Proc. 5th Aluminum-Lithium Conf. ‘Aluminum-lithium alloys’, (ed. T. H. Sanders, Jr. and E. A. Starke, Jr.), 1033–1041; 1989, Birmingham,Materials and Component Engineering Publications.
28. 10.1179/imr.1992.37.1.15310.1179/imr.1992.37.1.153 ↗
29. For gray scale in the print version read color table in the online version. Similarly where a color such as white in the print version is represented by a specific color (gold) in the online version the following is used: ‘white (online: gold)’.
30. Suresh S. ‘Fatigue of materials’, 2nd edn; 1998, Cambridge, Cambridge University Press.
31. Laird C. ‘Fatigue crack propagation’, ASTM STP 415, 131–168; 1967, Philadelphia, PA, ASTM.10.1520/STP47230S ↗
32. Here the term ‘mesotexture’ is used to describe crystallographic texture at the level of small groups of grains, i.e. at length scales between specimen average texture (microtexture) and the orientation of individual grains (microtexture ).
33. Ignatiev K. I. · 2004
34. Ignatiev K. I., Lee W.K., Fezzaa K., and Stock S. R.: Philos. Mag., 2005, 85, 3273–3300. Ignatiev et al. MicroCT quantification of microstructure: Part 1 Materials10.1080/14786430500155387 ↗