journal article·2015-06

Fatigue behaviour of laser sintered Nylon 12 in rotating and reversed bending tests

J. Munguia, K. Dalgarno

Materials Science and Technology· Volume 31· Issue 8
Publisher page

Abstract

This paper reports the results of a study into the fatigue behaviour of laser sintered Nylon 12 specimens in both reversed and rotating bending. Rotating bending tests are generally the most efficient in terms of test time, but reversed bending deformation explicitly promotes delamination, and so the main aim was to identify whether or not there was significant variation in fatigue behaviour between the two loading modes. The paper presents the first reversed bending fatigue test study on selective laser sintered Nylon parts and compares the results to fatigue behaviour from rotating bending. The results showed no significant variation in fatigue behaviour between the two loading modes and also showed an isotropic response in terms of fatigue behaviour in both test configurations.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Manufacturing Process and Optimization · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Newcastle University, Newcastle upon Tyne, UK

References (20)

Show source-provided references
1. 10.1109/TBME.2007.91263810.1109/TBME.2007.912638 ↗
2. 10.1016/j.proeng.2012.04.05610.1016/j.proeng.2012.04.056 ↗
3. Wohlers T. ‘Wohlers report 2013. Additive manufacturing state of the industry. Annual worldwide progress report’; 2013, Fort Collins, CO, USA, Wohlers Associates, Inc.
4. Singh S. · J. Manuf. Technol. Res · 2012 · 4 · 145
5. 10.1108/0144515031069864310.1108/01445150310698643 ↗
6. Hopkinson N., Hague R. J. M., and Dickens P. M. ‘Rapid manufacturing: an industrial revolution for the digital age’ 1, 285; 2006, West Sussex, John Wiley & Sons, Ltd.10.1002/0470033991.ch1 ↗
7. 10.1186/1471-2474-13-8410.1186/1471-2474-13-84 ↗
8. 10.1682/JRRD.2009.12.019510.1682/JRRD.2009.12.0195 ↗
9. 10.1016/j.polymertesting.2009.12.00610.1016/j.polymertesting.2009.12.006 ↗
10. Savalani M. ‘Control of selective laser sintering and selective laser melting processes PhD thesis, Selective laser sintering of hydroxyapatite-polyamide composites’; 2006, Loughborough, Loughborough University.
11. 10.1016/j.polymertesting.2013.04.01410.1016/j.polymertesting.2013.04.014 ↗
12. 10.1108/RPJ-07-2012-006410.1108/RPJ-07-2012-0064 ↗
13. ASTM D638-10: ‘Standard test method for tensile properties of plastics’; 2010, West Conshohocken, PA, ASTM International.
14. ASTM D671-93: ‘Standard test method for flexural fatigue of plastics by constant-amplitude-of-force (Withdrawn 2002)’; 1993, West Conshohocken, PA, ASTM International.
15. 10.5772/1448010.5772/14480 ↗
16. Berchem K. · Sci. Technol · 2006 · 17 · N60
17. EOS GmbH – Electro Optical Systems: ‘PA 2200 Balance 1.0. PA12 Datasheet’; 2010, http://eos.materialdatacenter.com/eo/en (accessed November 2012).
18. 10.1016/j.jmatprotec.2006.09.00710.1016/j.jmatprotec.2006.09.007 ↗
19. Ajoku U. · Proc. IMechE B · 2006 · 1077 · 1086
20. McKeen L. ‘Fatigue and tribological properties of plastics and elastomers’, (2nd edn), Oxford, UK, and Burlington, MA, Elsevier publications; 2010.10.1016/B978-0-08-096450-8.00010-7 ↗