Effect of environment on mechanical properties of coated superalloys and gas turbine blades
Source abstract
Abstract
Several investigations of the effects of environment on the mechanical properties of coated superalloys are examined, and the results that have been obtained are discussed. The short–time mechanical properties of superalloys (especially cast alloys, which have their optimum mechanical properties in the as–cast condition) may deteriorate during the coating process (e.g. on thermal cycling during coating, during post–coating heat treatment, or by coating surface effects). The degradation of the properties of the base material leads to an increase in creep rate, so the elongation that can be tolerated before the coating starts to crack will be reached in a shorter time. In a corrosive environment, stresses may be enhanced by general corrosion, with consumption of the coating and a measurable reduction of the cross–section, or by selective corrosion attack after a crack is initiated in the coating and propagates rapidly along grain boundaries, or by both general and selective corrosion. The effects of general corrosion may be calculated, but the effects of selective corrosion cannot.MST/286
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · High-Temperature Coating Behaviors · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. V. GUTTMANN and M. MERZ (eds.): in 'Corrosion and mechanical stress at high temperatures'; 1981, London, Applied Science.
2. SCHMITZ F. · 1976
3. SCHMITZ F. · VDI-Veröffentlichtung, Forschungsberichtsreihe Technologische Forschung und Entwicklung, BMFT-FBT, 1979, 79-106
4. SCHMITZ F. · Project TWC · 1980 · 70 · 962
5. SCHMITZ F. · Ref. 3, pp. 223-242.
6. 10.1002/mawe.1982013100410.1002/mawe.19820131004 ↗
7. H. DEMUS: Dissertation, Technische Hochschule Darmstadt, 1982.
8. 10.1002/maco.1978029010210.1002/maco.19780290102 ↗
9. SCHMITT-THOMAS K. H. G. · Prakt. Metallogr., · 1976 · 13 · 427
10. 10.1002/mawe.1976007050310.1002/mawe.19760070503 ↗
11. SCHUBERT F. · TEW Tech. Ber., · 1977 · 3 · 33
12. 10.1016/0040-6090(81)90006-710.1016/0040-6090(81)90006-7 ↗
13. BETZ W. · Ref. 2, pp. 185-197.
14. SCHWEITZER K. · Niederdruckplasmaspritzen von HeiBgaskorrosionsschutzschichten und Bestimmung ihrer physikalischen Eigenschaften', Final Report, COST 50, Round III, Project D13, 1984
15. WHITLOW G. A. · Proc · 1982 · AIME