Assessment of surface bonding strength in Al clad steel strip using electrical resistivity and peeling tests
Source abstract
Abstract
Aluminium clad steel strip successfully combines the surface properties of an aluminium alloy coating with the satisfactory mechanical properties of the steel substrate. The production of Al clad steel strip by rolling, however, is a more efficient and economical approach compared with other processes. In this investigation, trilayer strips of aluminium/steel/aluminium were produced using the cold roll bonding technique. The bonding strength between the layers and the electrical resistivity of the samples were measured using a peeling test and four point probe test, respectively. The effects of reduction of thickness, the friction condition between the outer layer and rolls, and the rolling velocity on the bonding strength and electrical resistivity of the samples were assessed. Finally, it is shown that the resistivity test can be used as a non-destructive test for the evaluation of the quality of bonding between the layers of aluminium clad steel strip.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Electronic Packaging and Soldering Technologies · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. 10.2355/isijinternational1966.23.62810.2355/isijinternational1966.23.628 ↗
2. Bay N.: Met. Constr. 1986, August, 486–490.
3. 10.1179/mst.1989.5.9.93410.1179/mst.1989.5.9.934 ↗
4. Forster J. A., Jha S., and Amatruda A.: J. Met. 1993, June, 35–38.10.1007/BF03223308 ↗
5. Tylecote R. F. ‘The solid phase welding of metal’: 1968, London, Edward Arnold.
6. AWS: ‘AWS welding handbook’, 5th edn; YEAR? Section 3, Chapter 50, Cold welding.
7. Mohamed H. A., and Washburn J.: Weld. J., 1975, September, 302s-310s.
8. Bay N.: Met. Constr. 1986, June, 369–372.
9. 10.1016/S0924-0136(96)02538-110.1016/S0924-0136(96)02538-1 ↗
10. Yahiro A., Masui T., Yoshida T., and Doi D.: ISIJ Int., 1991, 31, 647–654.10.2355/isijinternational.31.647 ↗
11. Vaidyanath L. R. · Br. Weld. J · 1959 · 6 · 13
12. Butlin J., and Mackay C. A.: Sheet Met. Ind. 1979, November, 1063–1072.
13. 10.1016/S0924-0136(97)00323-310.1016/S0924-0136(97)00323-3 ↗
14. 10.1016/S0007-8506(07)61207-410.1016/S0007-8506(07)61207-4 ↗
15. Cave J. A. · J. Inst. Met · 1973 · 101 · 203
16. McEwan K. J. B., and Milner D. R.: Br. Weld. J. 1962, July, 406–420.
17. Wright P. K., Snow D. A., and Tay C. K.: Met. Technol. 1978, January, 24–31.10.1179/mt.1978.5.1.24 ↗
18. 10.1179/174328413X1378982429346110.1179/174328413X13789824293461 ↗
19. Zhang W., and Bay N.: Weld. J., 1997, August, 326s-330s.
20. Zhang W., and Bay N.: Weld. J., 1997, October, 417s-420s.
21. Tylecote R. F. · Br. Weld. J · 1958 · 5 · 21
22. Vaidyanath L. R. · Br. Weld J · 1960 · 7 · 1
23. Sherwood W. C. · J. Inst. Met · 1969 · 97 · 1
24. 10.1361/10599490177034512310.1361/105994901770345123 ↗
25. 10.1179/mst.1989.5.4.37710.1179/mst.1989.5.4.377 ↗
26. Nicholas M. G. · Br. Weld. J · 1962 · 9 · 469
27. Donelan J. D. · Br. Weld J · 1959 · 6 · 5
28. Holmes E. · Br. Weld J · 1959 · 6 · 29
29. 10.1007/BF0264862910.1007/BF02648629 ↗
30. 10.1016/S0925-8388(03)00392-X10.1016/S0925-8388(03)00392-X ↗
31. 10.1016/S0261-3069(03)00135-310.1016/S0261-3069(03)00135-3 ↗
32. Bay N., and Zhang W.: Proc. 2nd Eur. Conf. on ‘Joining technology’, Florence, Italy, May. 1994, pp.379-388.
33. Clemensen C. · Met. Constr · 1986 · 18 · 625
34. Thomas K. · ASM welding handbook’ · 1994 · 6 · 312
35. Hosford W. F., and Caddle M. ‘Metal forming, mechanics and metallurgy’, 210–243; 1983, Englewood Cliffs, NJ, Prentice-Hall.
36. Dieter G. E. ‘Mechanical metallurgy’, 570–572; 1976, McGraw-Hill.
37. Abbasi M · Z. Metallk · 2001 · 92 · 423
38. Smits F. M. · Bstg · 1958 · 37 · 371
39. Van Vlack H. ‘Materials for engineering’, 481-482, 570-572; 1982, Addison-Wesley.
40. 10.1080/1478643660821901010.1080/14786436608219010 ↗