Temperature evaluation of cutting tools during machining of hardened bearing steel.using polycrystalline cubic boron nitride and ceramic cutting tools
Source abstract
Abstract
In this work some of the most popular techniques used to evaluate the temperature in cutting tools during machining are briefly reviewed. The experimental work used two different techniques to assess the temperature generated during turning of hardened bearing steel using polycrystalline cubic boron nitride and ceramic cutting tools: the thermal radiation method and the implanted thermocouple method. Additionally, a finite volume analysis was conducted to estimate the temperature distribution in the cutting tool. The results suggested that the temperature increased with the cutting speed, feedrate, depth of cut, and tool wear, and an increase in the thermal conductivity of the tool material caused an elevation in the temperature of the cutting tool and a reduction in the temperature of the chip. Temperatures as high as 1550°C were estimated in the cutting zone when finish turning using a high cubic boron nitride concentration cutting tool.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. TRIGGER K. J. · Trans. ASME · 1951 · 53 · 57
2. LOEWEN E. G. · Trans. ASME · 1954 · 73 · 217
3. H. ERNST and M. E. MERCHANT: ‘Chip formation, friction and finish’; 1940, The Cincinatti Milling Machine Co.
4. CHAO B. T. · Trans. ASME · 1958 · 80 · 311
5. 10.1016/0924-0136(93)90033-310.1016/0924-0136(93)90033-3 ↗
6. BARROW G. · Ann. CIRP · 1973 · 22 · 203
7. E. M. TRENT: ‘Metal cutting’, 3rd edn; 1991, London, Butterworths.10.1016/B978-0-7506-1068-1.50010-1 ↗
8. WRIGHT P. K. · J. Iron and Steel Inst., · 1973 · 211 · 364
9. ROSSETO S. · Ann. CIRP · 1971 · 19 · 551
10. 10.1115/1.343894610.1115/1.3438946 ↗
11. 10.1016/S0007-8506(07)62167-210.1016/S0007-8506(07)62167-2 ↗
12. 10.1115/1.366757510.1115/1.3667575 ↗
13. LEVY B. S. · Conf. ‘North American metalworking research’ · 1973 · 334
14. L. MICHALSKI, K. ECKERSDORF, and J. McGHEE: ‘Temperature measurement’; 1991, London, Wiley.
15. QURESHI A. H. · Ann. CIRP · 1966 · 14 · 189
16. 10.1115/1.343882810.1115/1.3438828 ↗
17. 10.1080/0020754770894311110.1080/00207547708943111 ↗
18. REICHENBACH G. S. · Trans. ASME · 1958 · 80 · 525
19. 10.1243/PIME_PROC_1963_177_058_0210.1243/PIME_PROC_1963_177_058_02 ↗
20. HOOFER R. M. · Ind. Diamond Rev., · 1989 · 4 · 170
21. K. J. BROOKES: ‘Hardmetals and other hard materials’, 5th edn; 1992, Barnet, Int. Carbide Data.
22. 10.1016/0020-7357(86)90191-510.1016/0020-7357(86)90191-5 ↗
23. 10.1115/1.289966810.1115/1.2899668 ↗
24. BOSSOM P. K. · Ind. Diamond Rev., · 1990 · 5 · 228
25. 10.1179/03071698380329157810.1179/030716983803291578 ↗