journal article·1989-04

Some effects of heat treatment on grain boundary chemistry and precipitation in type 316 steel

A. W. James, C. M. Shepherd

Publisher page

Abstract

The effects of solution treatment temperature and cooling rate, carbon content, and aging at 600°C on the precipitation and grain boundary composition of AISI type 316 stainless steel were investigated. No matrix precipitation was observed even in a high carbon cast aged for 1000 h. Carbides of M23C6 type were the only precipitates observed and these formed on grain boundaries. Nucleation of a second phase in these solution treated specimens was difficult, despite the carbon supersaturation. The grain boundary regions were investigated using high spatial resolution X-ray analysis to show that chromium depleted and nickel enriched zones formed when grain boundary carbides occurred. The behaviour of molybdenum was more complex; it segregated strongly to grain boundaries either during a slow cool from the solution treatment temperature or during aging, but was also incorporated into any carbides that formed.MST/890
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. 10.1007/BF0264765910.1007/BF02647659 ↗
2. 10.1179/03063457279044596610.1179/030634572790445966 ↗
3. 10.1179/03063457679043189510.1179/030634576790431895 ↗
4. 10.1179/msc.1974.8.1.33710.1179/msc.1974.8.1.337 ↗
5. SPRUIELL J. E. · Metall. Trans., · 1973 · 3 · 153310.1007/BF02668005 ↗
6. 10.1179/msc.1978.12.11.54210.1179/msc.1978.12.11.542 ↗
7. 10.1179/03063456879044313410.1179/030634568790443134 ↗
8. BANERJEE B. R. · Trans. ASM · 1968 · 61 · 103
9. C. M. SHEPHERD, A. W. JAMES, and J. M. TITCHMARSH: ‘Chemical and microstructural effects on the diffusional creep behaviour of AISI type 316 stainless steel’, Report R11322, Harwell Laboratory, 1985.
10. C. M. SHEPHERD and S. M. ALLAN: ‘The effects of composition, precipitation, and surface preparation on lattice and grain boundary diffusion in AISI type 316 stainless steel’, Report R12096, Harwell Laboratory, 1986.
11. DEIGHTON M. · J. Iron Steel Inst., · 1970 · 208 · 1012
12. 10.1007/BF0074557810.1007/BF00745578 ↗
13. 10.1007/BF0264455410.1007/BF02644554 ↗
14. H. S. BETRABET and W. A. T. CLARICE: ‘Materials problem solving with the transmission electron microscope’ (Symp. Proc.), (ed. L. W. Hobbs et al), 183-190; Pittsburgh, PA, Materials Research Society.
15. 10.1016/0036-9748(86)90428-X10.1016/0036-9748(86)90428-X ↗
16. C. M. sHEPHERD: ‘A detailed microstructural examination of the cause of HAZ cracking in type 316 steel’, Report R12428, Harwell Laboratory, 1987.
17. J. M. TITCHMARSH, C. M. SHEPHERD, and I. A. VATTER: ‘The measurement of chemical composition with high spatial resolution using a dedicated scanning transmission electron microscope’, Report R12317, Harwell Laboratory, 1987.
18. 10.1016/0001-6160(68)90097-710.1016/0001-6160(68)90097-7 ↗
19. 10.1063/1.165783510.1063/1.1657835 ↗
20. STAWSTRÖM C. · J. Iron Steel Inst., · 1969 · 207 · 77
21. 10.1179/03063458079042601210.1179/030634580790426012 ↗
22. KARLSSON L. · J. Phys. (Orsay) · 1984 · 45 · 391
23. 10.5006/1.357736210.5006/1.3577362 ↗
24. 10.5006/1.358082810.5006/1.3580828 ↗
25. 10.5006/1.359391510.5006/1.3593915 ↗