journal article·2000-05

Flow curves up to peak strength of hot deformed D2 and W1 tool steels

C.A.C. Imbert, H.J. McQueen

Materials Science and Technology· Volume 16· Issue 5
Publisher page

Abstract

A high carbon, high chromium cold work die steel (D2) and a water hardenable carbon tool steel (W1) were hot deformed in torsion between 900 and 1150°C for the alloy steel and 900 and 1200°C for the carbon steel, at strain rates from 0·1 to 4 s -1 . The slope of the stress–strain curves, which represents strain hardening, decreased linearly then changed gradually to a slower linear decline before decreasing quickly to zero at the peak stress. On further strain, stress decreased to a steady state regime, indicative of dynamic recrystallisation. Kocks–Mecking analysis provided an activation enthalpy with an average comparable to the activation energy derived from a sinh modified Arrhenius analysis of peak stress. The alloy carbides of the D2 steel have the effect of raising its strength to over twice that of the carbon steel, accelerating the onset of dynamic recrystallisation but drastically lowering its ductility.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

the Department of Mechanical EngineeringConcordia University, Montreal, H3G 1M8, Canada

References (81)

Show source-provided references
1. ROBERTS W.: in ‘Deformation processing and microstructure’ (ed. Krauss A. G.) 109-184; 1982 ASM International Materials Park OH.
2. 10.1007/BF0266489910.1007/BF02664899 ↗
3. ZELA L. FUXA J. HOLLER M. and MALY L.: 5th Int. Symp. on ‘Plasticity and resistance to metal deformation’ Herceg-Novi Yugoslavia April 1986 Ferrous Metallurgy Institute Niksic 179–193.
4. MILOVIC R. et al. : 5th Int. Symp. on ‘Plasticity and resistance to metal deformation’ Herceg-Novi Yugoslavia April 1986 Ferrous Metallurgy Institute Niksic 199–214.
5. 10.1016/0378-3804(86)90001-X10.1016/0378-3804(86)90001-X ↗
6. 10.1016/0378-3804(86)90004-510.1016/0378-3804(86)90004-5 ↗
7. ROBERTS G. A. and CARY R. A.: ‘Tool steels’; 1988 Materials Park OH ASM International.
8. MCG W. J.. TEGART and A. GITTINS: in ‘The hot deformation of austenite’ (ed. Ballance J. B.) 1-46 1977 New York AIME.
9. 10.1016/0924-0136(95)01987-P10.1016/0924-0136(95)01987-P ↗
10. IMBERT C. A. C., and MCQUEEN H. J.: Mater. Sci. Eng., to be published.
11. IMBERT C. A. C. and MCQUEEN H. J.: Can. Metall. Q. to be published.
12. IMBERT C. A. C. and MCQUEEN H. J.: submitted to Mater. Sci. Eng.
13. MCQUEEN H. J. and IMBERT C. A. C.: in ‘Thermomechanical processing and mechanical properties of hypereutectoid steels’ (ed. Lesuer D. R. et al) 55-66; 1977 Warrendale PA TMS-AIME.
14. 10.1115/1.344334010.1115/1.3443340 ↗
15. BERNSHTEIN M. L. KAPUTKINA L. M. PROKOSHKIN S. D. and DOBATKIN S. V.: Acta Metall. 1985 33 247–254.10.1016/0001-6160(85)90142-7 ↗
16. KASSNER M. E. and MILLER A. K.: in ‘New developments in stainless steel technology (ed. Lula R. A.) 19-28; 1985 Materials Park OH ASM International.
17. DONADILLE C. ROSSARD C. and THOMAS B.: in ‘Annealing processes - recovery recrystallization and grain growth’ (ed. Hansen N. et al) 285-290; 1986 Roskilde Riso National Laboratory.
18. EVANGELISTA E., , RYAN N. D., , and MCQUEEN H. J.: Metall. Sci. Technol., 1987, 5, (2), 50–58.
19. CHOQUET C. LAMBERTERIE B. DE PEDRIX C. and BIAUSSER H.: Report 1099 IRSID Saint-Germain-en-Laye 1987.
20. MCQUEEN H. J.: Mater. Sci. Eng., 1988, 101, 149–160.
21. CINGARA A. GERMAIN ST. L. and MCQUEEN H. J.: in ‘Processing microstructure and properties of HSLA steels’ (ed. Deardo A.) 91-104; 1988 Warrendale PA TMS-AIME.
22. 10.1016/0924-0136(90)90005-F10.1016/0924-0136(90)90005-F ↗
23. 10.1080/02619180.1990.1175345410.1080/02619180.1990.11753454 ↗
24. PEDRIX C.: Recherche Ceca 7210-EA/311, Institut de Recherches de la Sidérurgie Française, 1993.
25. MCQUEEN H. J. YUE S. RYAN N. D. and FRY E.: in ‘Advanced materials and technologies’ (ed. Dobrzanski L. A.) 295-332; 1995 Giliwice Silesian Technological University.
26. 10.1080/09603409.1992.1168942010.1080/09603409.1992.11689420 ↗
27. 10.1179/cmq.1993.32.2.16510.1179/cmq.1993.32.2.165 ↗
28. 10.1007/BF0266545910.1007/BF02665459 ↗
29. KONOPLEVA E. V. KLESTOV V. M. and MCQUEEN H. J.: mt. Symp. on ‘Phase transformation during thermal/mechanical pro-cessing of steel’ (ed. Hawbolt E. B. and Yue S.) 243–258; 1995 Montreal CIM.
30. KLESTOV V. M., , KONOPLEVA E. V., , and MCQUEEN H. J.: Can. Metall. Q., 1996, 35, 169–180.
31. 10.1179/cmq.1983.22.3.36910.1179/cmq.1983.22.3.369 ↗
32. 10.1016/0025-5416(86)90267-310.1016/0025-5416(86)90267-3 ↗
33. RYAN N. D. and MCQUEEN H. J.: Stainless Steels ‘87 498-507; 1988 London The Institute of Metals.
34. 10.1080/02619180.1990.1175347810.1080/02619180.1990.11753478 ↗
35. 10.1520/JTE10554J10.1520/JTE10554J ↗
36. FIELDS D. S., and BACKOFEN W. A.: Proc. AS TM, 1957, 57, 1259–1272.
37. ROSSARD C.: Métaux-Corros.-Ind. 1960 35 102-115 140-153 190–205.
38. KAYSER F., and COHEN M.: Met. Prog., 1952, 61, (6), 79–85.
39. GITTINS A.: Met. Forum, 1979, 2, (2), 98–107.
40. RYAN N. D. and MCQUEEN H. J.: in ‘Strength of metals and alloys - ICSMA9’ (ed. Brandon D. G. et al) 675–682; 1991 London Freund.
41. RYAN N. D. and MCQUEEN H. J.: in ‘Advances in hot textures and microstructures’ (ed. Bieler T. R. et al) 445-457; 1995 Warrendale PA TMS-AIME.
42. MECKING H. and GOTTSTEIN G.: ‘Recrystallization of metallic materials’ (ed. Haessner F.) 195-222; 1978 Stuttgart Dr. Riederer Verlag.
43. SELLARS C. M. and W. J. MCG.TEGART: Acta Metall. 1966 14 (9) 1136–1138.10.1016/0001-6160(66)90207-0 ↗
44. SELLARS C. M. and MCG W J.. TEGART: int. Metall. Rev. 17 1–24.
45. ROSSARD C. and BLAIN P.: in ‘Flat rolled products III’ (ed. Earhart E. W.) 3-28; 1962 Chicago IL Interscience.
46. GOLDSCHMIDT H. J.: J. Iron Steel Inst., 1948, 160, 345–362.
47. GOLDSCHMIDT H. J.: J. Iron Steel Inst., 1952, 170, 189–204.
48. KUO K.: J. Iron Steel Inst., 1952, 173, 363–375.
49. MALKIEWICZ T., , BOJARSKI Z., , and FORYST J.: J. Iron Steel Inst., 1959, 193, 25–31.
50. 10.1179/mtlr.1964.9.1.4910.1179/mtlr.1964.9.1.49 ↗
51. IMBERT C. and MCQUEEN H. J.: in ‘Hot workability of steels and light alloys - composites’ (ed. McQueen H. J. et al.) 451–458; 1996 Montreal CIM.
52. KONOPLEVA E. V. and MCQUEEN H. J.: ‘Processes and materials innovation - stainless steels 1993’ (ed. Nicodemi W.) Vol. 3 291-296; 1993 Milan Associazione Italiana dei Metalli.
53. LUCKE K. and DETERT K.: Acta Metall. 1951 5 628–637.10.1016/0001-6160(57)90109-8 ↗
54. SMALLMAN R. E.: ‘Modern physical metallurgy’ 313–404; 1970 London Butterworths.
55. LESLIE W. C. MICHALAK J. T. and AUL F. W.: ‘Iron and its dilute solid solutions’ (ed. Spencer C. W. and Werner F. W.) 119-216; 1963 New York Interscience.
56. 10.1007/BF0240306010.1007/BF02403060 ↗
57. 10.1007/BF0283365110.1007/BF02833651 ↗
58. MCQUEEN H. J. EVANGELISTA E. and RYAN N. D.: in ‘Recrystallization ‘90’ (ed. Chandra T.) 89-100; 1990 Warrendale PA TMS-AIME.
59. JONAS J. J.: ‘Strength of metals and alloys — ICSMA4’ 976–1002; 1976 Parc de Saurupt Laboratoire de Physique du Solide — ENSMIM INPL.
60. AKBEN M. G. WEISS I. and JONAS J. J.: Acta Metall. 1981 29 111–121.10.1016/0001-6160(81)90092-4 ↗
61. JONAS J. J., and AKBEN M. G.: Met. Forum, 1981, 4, 92–101.
62. 10.1007/BF0266236410.1007/BF02662364 ↗
63. 10.1080/09603409.1992.1168942010.1080/09603409.1992.11689420 ↗
64. RYAN N. D. and MCQUEEN H. J.: ‘New developments in stainless steel technology’ 293–304; 1985 Materials Park OH ASM International.
65. 10.1179/03071697980327653410.1179/030716979803276534 ↗
66. MCQUEEN H. J. SANKAR J. and FULOP S.: ‘Mechanical behavior of materials — ICM3’ (ed. Miller K. J. and Smith R. F.) 675–684; 1979 Oxford Pergamon.10.1016/B978-1-4832-8414-9.50091-2 ↗
67. WILCOX J. R. and HONEYCOMBE R. W. K.: ‘Hot working and forming processes’ (ed. C. M Sellars and C. J. Davies) 108-112; 1980 London The Metals Society.
68. GITTINS A. and W. J. MCG.TEGART: Met. Forum, 1981, 4, 57–62.
69. 10.1007/BF0283366310.1007/BF02833663 ↗
70. MCQUEEN H. J., , BOWLES J., , and RYAN N. D.: MiCrOSIMCI. Sci., 1989, 17, 357–373.
71. CARFI G. PEDRIX C. BOULEAU D. and DONADILLE C.: ‘Strength of metals and alloys — ICSMA7’ (ed. McQueen H. J. et al) 929-934; 1986 Oxford Pergamon.
72. 10.1179/02670830010150803610.1179/026708300101508036 ↗
73. HARDWICK D. and W. J. MCG.TEGART: J. Inst. Met., 1962, 90, 17–21.
74. GARAFALO F.: Trans. Metall. Soc. AIME, 1963, 227, 351–355.
75. JONAS J. J.: Trans. Q. ASM, 1969, 62, 301–303.
76. MCQUEEN H. J. and MECKING H.: in ‘Creep and fracture of engineering materials and structures’ (ed. B. Wiltshire and D. R. J. Owen) 169-184; 1984 Swansea Pineridge.
77. ROBERTS W.: ‘Strength of metals and alloys — ICSMA 7’ (ed. McQueen H. J. et al) Vol. 3 1859–1891; 1985 Oxford Pergamon.10.1016/B978-0-08-031640-6.50016-5 ↗
78. 10.1016/0924-0136(92)90236-L10.1016/0924-0136(92)90236-L ↗
79. 10.1080/09603409.1992.1168941910.1080/09603409.1992.11689419 ↗
80. MCQUEEN H. J. CUI Y. LI B. MENG Q. and RYAN N. D.: in ‘Strip casting hot and cold working of stainless steel’ (ed. Ryan N. D. et al) 181-192; 1993 Montreal CIM.
81. CARLSSON J. E. and ROBERTS W.: Report 1583 Swedish Institute for Metals Research Stockholm 1981.