journal article·2002-03

Modelling of rheological behaviour of semisolid metal slurries Part 4 – Effects of particle morphology

Z. Fan, J. Y. Chen

Materials Science and Technology· Volume 18· Issue 3
Publisher page

Abstract

In this part of the series, the fractal dimension D is introduced to quantify the morphology of equiaxed dendrites and the concept of equivalent solid fraction Ψ to connect solid fraction to the effective solid fraction. Generally, dendrite formed during diffusion controlled solidification has a fractal dimension of 2.5, while for a perfectly spherical particle D=3. The rheological model developed in Part 1 is then used to deduce the D data from experimental results of continuous cooling in the literature. It is shown that, within the range of experimental conditions concerned, D is predominantly affected by solid fraction (or semisolid temperature), while shear rate and cooling rate only have a limited effect on D. The rheological model developed in Part 1 is applied to study the rheological behaviour of semisolid metal (SSM) slurries with non-spherical particle morphology. It is found that under constant morphology assumption the shear thinning effect is much more pronounced for SSM slurries with solid particles of lower fractal dimension (i.e. a more dendritic morphology), and that the degree of thixotropy increases with decreasing fractal dimension of solid particles. In addition, it has been demonstrated that as a diffusion controlled process, particle spheroidisation takes many thousands of seconds, and is much slower than the deagglomeration process (a few seconds) and the agglomeration process (a few thousand seconds).
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Fluid Dynamics and Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. 10.1007/BF0265511210.1007/BF02655112 ↗
2. 10.1007/BF0264258010.1007/BF02642580 ↗
3. 10.1007/BF0266109010.1007/BF02661090 ↗
4. 10.1179/02670830110151108610.1179/026708301101511086 ↗
5. CHEN J. Y. · Mater. Sci. TechnoL · 2002 · 18 · 237 — 242
6. 10.1179/imr.1994.39.5.17310.1179/imr.1994.39.5.173 ↗
7. 10.1103/PhysRevA.27.149510.1103/PhysRevA.27.1495 ↗
8. 10.1038/308721a010.1038/308721a0 ↗
9. 10.1103/PhysRevLett.68.21310.1103/PhysRevLett.68.213 ↗
10. 10.1557/JMR.1993.010010.1557/JMR.1993.0100 ↗
11. 10.1063/1.37108710.1063/1.371087 ↗
12. FAN Z. · Mater. Sci. TechnoL · 2002 · 18 · 243 — 249
13. 10.1179/02670830122500067110.1179/026708301225000671 ↗
14. 10.1142/051110.1142/0511 ↗
15. K. J. FALCONER: ‘The geometry of fractal sets’, 13; 1986, Cambridge, Cambridge University Press.10.1017/CBO9780511623738 ↗
16. R. C. WEAST: ‘Handbook of tables for mathematics’, 129; 1975, Cleveland, OH, CRC Press.
17. 10.1063/1.175038010.1063/1.1750380 ↗
18. 10.1063/1.175063110.1063/1.1750631 ↗
19. 10.1007/BF0054087310.1007/BF00540873 ↗
20. 10.1016/0956-7151(94)90426-X10.1016/0956-7151(94)90426-X ↗
21. 10.1007/BF0054918510.1007/BF00549185 ↗