Influence of mixed mode I/III loading on fracture toughness of mild steel at various strain rates
Source abstract
Abstract
The effect of loading angle &phis; on the fracture toughness of mild steel at various strain rates has been studied. The fracture toughness was found to decrease with increasing loading angle (or increasing mode III component) at strain rates 10-5 to 100 s-1 where ductile fracture was observed. Under impact conditions (strain rate 102 s-1), fracture was by cleavage and the fracture toughness was found to increase with increasing loading angle. The results showed that the mixed mode fracture behaviour of mild steel changed from Class C in the strain rate range 10-5 to 100 s-1 to a combination of Class A and B under impact conditions. In the strain rate range 10-5 to 10-2 s-1, the fracture toughness behaviour with increasing strain rate was found to be similar for the three loading angles studied, namely &phis;= 0, &phis;= 30 and &phis;= 45°. At the strain rates 10-2 to 102 s-1, fracture toughness at &phis;= 0° decreased sharply, while for loading angles &phis;= 30° and &phis;= 45°, the fracture toughness increased with strain rate. The increase in mixed mode fracture toughness with strain rate in this strain rate regime has been attributed to the inertial effects which are known to reduce the T stress ahead of the crack.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Fatigue and fracture mechanics · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. 10.1016/0025-5416(73)90066-910.1016/0025-5416(73)90066-9 ↗
2. J. HARDING: in ‘Explosive welding, forming and compaction’ (ed. T. Z. Blazynski), 1983; London and New York, Applied Science Publishers.
3. S. ROLFE and S. R. BARSOM: ‘Fracture and fatigue control in structures’, 92–139; 1977, Englewood Cliffs, NJ, Prentice Hall.
4. 10.1007/BF0274517810.1007/BF02745178 ↗
5. A. H. PRIEST: in ‘Dynamic fracture toughness’, (ed. M. G. Dawes), 95; 1973, Cambridge, Cambridge University Press/The Welding Institute.
6. 10.2355/isijinternational1966.23.69610.2355/isijinternational1966.23.696 ↗
7. 10.1179/02670830110151037510.1179/026708301101510375 ↗
8. 10.1016/0013-7944(71)90032-410.1016/0013-7944(71)90032-4 ↗
9. 10.1016/0013-7944(80)90093-410.1016/0013-7944(80)90093-4 ↗
10. 10.1007/BF0266855510.1007/BF02668555 ↗
11. 10.1016/0036-9748(89)90444-410.1016/0036-9748(89)90444-4 ↗
12. 10.1111/j.1151-2916.1987.tb04871.x10.1111/j.1151-2916.1987.tb04871.x ↗
13. 10.1007/BF0264699910.1007/BF02646999 ↗
14. 10.1016/0956-7151(91)90208-I10.1016/0956-7151(91)90208-I ↗
15. 10.1007/BF0267557610.1007/BF02675576 ↗
16. 10.1016/0956-7151(93)90144-H10.1016/0956-7151(93)90144-H ↗
17. 10.1007/BF0267077010.1007/BF02670770 ↗
18. 10.1520/JTE11838J10.1520/JTE11838J ↗
19. 10.1016/0036-9748(89)90141-510.1016/0036-9748(89)90141-5 ↗
20. 10.1016/0025-5416(82)90139-210.1016/0025-5416(82)90139-2 ↗
21. 10.1016/0013-7944(83)90009-710.1016/0013-7944(83)90009-7 ↗
22. 10.1115/1.280473110.1115/1.2804731 ↗
23. 10.1016/0022-5096(69)90033-710.1016/0022-5096(69)90033-7 ↗
24. 10.1007/BF0274517810.1007/BF02745178 ↗
25. 10.1016/S0013-7944(98)00028-910.1016/S0013-7944(98)00028-9 ↗