journal article·2005-01

Phosphorus segregation in 2.25Cr–1Mo steel

R. G. Ding, T. S. Rong, J. F. Knott

Materials Science and Technology· Volume 21· Issue 1
Publisher page

Abstract

Phosphorus segregation to grain boundaries in a commercial grade 2.25Cr–1Mo steel subjected to a variety of heat treatments has been examined using X-ray spectroscopy in a field emission gun scanning transmission electron microscope. A number of points have been established. Segregation of phosphorus to grain boundaries is present after austenitising and quenching. Tempering for 2 h at 650°C enhances phosphorus segregation during the following aging processes at 520°C. A higher austenitisation temperature (larger grain size) makes subsequent segregation more intense. For specimens austenitised at 1100°C, the concentration of phosphorus segregated to grain boundaries steadily increases with aging time after tempering (from 0 to 210 h). For specimens austenitised at 900°C, the phosphorus concentration at grain boundaries first increases, reaches a maximum at an aging time of ∼ 210 h and then decreases with aging time (480 h).
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. 10.1038/178433b010.1038/178433b0 ↗
2. C. J. McMahon: ‘Temper embrittlement in steels’; 127; 1968, Philadelphia, PA, ASTM.10.1520/STP46479S ↗
3. Stein D. F. · ASM Trans · 1969 · 62 · 776
4. 10.1111/j.1365-2818.1978.tb00076.x10.1111/j.1365-2818.1978.tb00076.x ↗
5. 10.1007/BF0264439110.1007/BF02644391 ↗
6. 10.1016/0956-7151(94)90463-410.1016/0956-7151(94)90463-4 ↗
7. 10.1179/mst.1996.12.10.81810.1179/mst.1996.12.10.818 ↗
8. 10.1016/0001-6160(78)90147-510.1016/0001-6160(78)90147-5 ↗
9. Gavrilov R. L. · Acta Metall · 1999 · 47 · 4031
10. Thomson R. C. · Acta Metall · 1998 · 46 · 2203
11. Clayton J. Q. · Met. Set · 1982 · 16 · 145
12. D. McLean: ‘Grain boundaries in metals’, 116; 1957, Oxford, Oxford University Press.
13. Aust K. T. · ASM Trans · 1976 · 60 · 360
14. 10.1016/0001-6160(69)90120-510.1016/0001-6160(69)90120-5 ↗
15. Williams T. M. · Met. Set · 1976 · 10 · 14
16. 10.1016/0001-6160(81)90109-710.1016/0001-6160(81)90109-7 ↗
17. 10.1007/BF0264880010.1007/BF02648800 ↗
18. 10.1007/BF0264402710.1007/BF02644027 ↗
19. 10.1016/S1359-6462(99)00069-X10.1016/S1359-6462(99)00069-X ↗
20. 10.1016/S0921-5093(99)00735-210.1016/S0921-5093(99)00735-2 ↗
21. 10.1016/0001-6160(84)90137-810.1016/0001-6160(84)90137-8 ↗
22. 10.1007/BF0265991910.1007/BF02659919 ↗
23. Li Q. F. · Ser. Metall · 2002 · 47 · 389
24. Papworth A. J. · Ser. Metall · 2003 · 48 · 1301
25. Janovec J. · Acta Metall · 2003 · 51 · 4025
26. 10.1016/0001-6160(89)90048-510.1016/0001-6160(89)90048-5 ↗
27. 10.1007/BF0073862610.1007/BF00738626 ↗
28. 10.1016/0001-6160(87)90289-610.1016/0001-6160(87)90289-6 ↗
29. 10.1007/BF0116059010.1007/BF01160590 ↗
30. Seibel G. · Mém. Etud. Set Rev. Métalt · 1964 · 61 · 413
31. Seve P. · Ser. Metall · 1994 · 31 · P1673
32. 10.1016/0001-6160(89)90290-310.1016/0001-6160(89)90290-3 ↗
33. 10.1179/02670839910150640910.1179/026708399101506409 ↗
34. Janovec J. · Ser. Metall · 1995 · 33 · 295
35. 10.1016/0036-9748(83)90225-910.1016/0036-9748(83)90225-9 ↗
36. 10.1016/S0167-577X(00)00210-X10.1016/S0167-577X(00)00210-X ↗