Mathematical modelling of hot rolling steel strip
Source abstract
Abstract
AbstractAbstractThermal and microstructural evolution during hot rolling of low carbon steel in a continuous six stand mill is simulated with a two-dimensional explicit finite difference model in which the cross-sectional area of the strip is divided into small elements of equal volume. The heat transfer coefficients at the surface of the strip are allowed to change as it is assumed that the strip is in air or is being descaled or deformed. Results of the microstructural modelling indicate that austenite is able to undergo dynamic recrystallisation when the conditions within the roll gap are propitious. This model also allows for the occurrence of metadynamic and static recrystallisation once the material leaves the gap and for grain growth after their completion. From this, it is concluded that the most important controlling mechanism is grain growth. The thermal portion of the model was validated with measurements made on a six stand continuous mill. It was not possible to obtain a direct validation of the microstructural algorithms, but they are considered to be correct, since it was possible to achieve a good correlation between the separation forces predicted by the model and those recorded experimentally during actual production once the kinetics of the different mechanisms were incorporated into the model.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. F. HOLLANDER: in ‘Mathematical models in metallurgical process development’, 46; 1970, London, The Iron and Steel Institute.
2. 10.1179/mst.1985.1.4.32510.1179/mst.1985.1.4.325 ↗
3. C. M. SELLARS: in ‘Mathematical modelling of hot rolling of steel’, (ed. S. Yue), 1; 1990, Montreal, Canadian Institute of Mining and Metallurgy.
4. F. HOLLANDER: in ‘Mathematical modelling of hot rolling of steel’, (ed. S. Yue), 19; 1990, Montreal, Canadian Institute of Mining and Metallurgy.
5. P. CHOQUET, P. FABRÉGUE, J. GIUSTI, B. CHAMONT, J. N. PEZANT, and F. BLANCHET: in ‘Mathematical modelling of hot rolling of steel’, (ed. S. Yue), 34; 1990, Montreal, Canadian Institute of Mining and Metallurgy.
6. P. D. HODGSON and R. K. GIBBS: in ‘Mathematical modelling of hot rolling of steel’, (ed. S. Yue), 76; 1990, Montreal, Canadian Institute of Mining and Metallurgy.
7. 10.1088/0965-0393/3/4/00210.1088/0965-0393/3/4/002 ↗
8. B. CARNAHAN, H. A. LUTHER, and J. O. WILKES: ‘Applied numerical methods’; 1969, New York, Wiley.
9. 10.1179/03071698180327545110.1179/030716981803275451 ↗
10. SIGALLA A. · J. Iron Steel Inst · 1957 · 186 · 90
11. A. COLÁS and C. M. SELLARS: in ‘Accelerated cooling of rolled steel’, (ed. G. E. Ruddle and A. F. Crawley), 121; 1988, Oxford, Pergamon.10.1016/B978-0-08-035770-6.50013-1 ↗
12. R. COLÁS: in ‘Manufacturing Science and Engineering’, Vol. 2, (ed. W. E. Alzheimer), 611; 1994, New York, ASME.
13. 10.1520/JTE11032J10.1520/JTE11032J ↗
14. 10.1016/0924-0136(95)02227-910.1016/0924-0136(95)02227-9 ↗
15. 10.1179/mt.1978.5.1.22810.1179/mt.1978.5.1.228 ↗
16. PAIDASSE J. · Rev. Fr. Metall · 1957 · 54 · 2
17. LORANG G. · Rev. Univ. Mines · 1961 · 17 · 514
18. 10.1021/ja01209a03010.1021/ja01209a030 ↗
19. WILMOTTE S. · C.R.M. Metall. Rep · 1973 · 36 · 35
20. 10.1111/j.1151-2916.1972.tb13436.x10.1111/j.1151-2916.1972.tb13436.x ↗
21. 10.1007/BF0054081210.1007/BF00540812 ↗
22. C. M. SELLARS: in ‘Hot working and forming processes’, (ed. C. M. Sellars and G. J. Davies), 3; 1980, Warrendale, PA, TMS.
23. 10.1007/BF0264872010.1007/BF02648720 ↗
24. M. TORRES and R. COLÁS: in ‘Manufacturing Science and Engineering’, Vol. 2, (ed. W. E. Alzheimer), 577; 1994, New York. ASME.
25. DEVADAS C. · Ironmaking Steelmaking · 1986 · 6 · 311
26. I. SAIVIARASEKERA: in ‘Mathematical modelling of hot rolling of steel’, (ed. S. Yue), 148; 1990, Montreal, Canadian Institute of Mining and Metallurgy.
27. H. YADA: in ‘Accelerated cooling of rolled steel’, (ed. G. E. Ruddle and A. F. Crawley), 105; 1988, Oxford, Pergamon.
28. J. C. MORALES, C. GARCÍA, R. COLÁS, and L. A. LEDUC: in ‘Hot workability of steels and light alloys composites’, (ed. H. J. McQueen et al.), 365; 1996, Montreal, Canadian Institute of Mining and Metallurgy.